“Zero setup” cross compilation and “cross testing” of Rust crates
This project is developed and maintained by the cross-rs team. It was previously maintained by the Rust Embedded Working Group Tools team. New contributors are welcome! Please join our Matrix room and say hi.
`cross test`ing a crate for the aarch64-unknown-linux-gnu target
-
crosswill provide all the ingredients needed for cross compilation without touching your system installation. -
crossprovides an environment, cross toolchain and cross compiled libraries, that produces the most portable binaries. -
“cross testing”,
crosscan test crates for architectures other than i686 and x86_64. -
The stable, beta and nightly channels are supported.
See our Getting Started guide for detailed installation instructions.
- rustup
- A Linux kernel with binfmt_misc support is required for cross testing.
One of these container engines is required. If both are installed, cross will
default to docker.
- Docker. Note that on Linux non-sudo users need to be in the
dockergroup or use rootless docker. Read the container engine install guide for the required installation and post-installation steps. Requires version 20.10 (API 1.40) or later. - Podman. Requires version 3.4.0 or later.
cargo install cross --git https://github.com/cross-rs/crossIt's also possible to directly download the pre-compiled release binaries or using cargo-binstall.
cross has the exact same CLI as Cargo
but relies on Docker or Podman. For Docker, you'll have to start
the daemon before you can use it.
# (ONCE PER BOOT, on Linux)
# Start the Docker daemon, if it's not already running using systemd
# on WSL2 and other systems using SysVinit, use `sudo service docker start`.
$ sudo systemctl start docker
# MAGIC! This Just Works
$ cross build --target aarch64-unknown-linux-gnu
# EVEN MORE MAGICAL! This also Just Works
$ cross test --target mips64-unknown-linux-gnuabi64
# Obviously, this also Just Works
$ cross rustc --target powerpc-unknown-linux-gnu --release -- -C lto
Additional documentation can be found on the
wiki or the docs/ subfolder.
You have four options to configure cross. All of these options use the TOML
format for configuration and the possible configuration values are documented
here.
You can directly set configuration values in your Cargo.toml
file, under the [workspace.metadata.cross] table, i.e. key prefix. An example
config snippet would look like this:
[workspace.metadata.cross.target.aarch64-unknown-linux-gnu]
# Install libssl-dev:arm64, see <https://github.com/cross-rs/cross/blob/main/docs/custom_images.md#adding-dependencies-to-existing-images>
pre-build = [
"dpkg --add-architecture $CROSS_DEB_ARCH",
"apt-get update && apt-get --assume-yes install libssl-dev:$CROSS_DEB_ARCH"
]
[workspace.metadata.cross.target.armv7-unknown-linux-gnueabi]
image = "my/image:latest"
[workspace.metadata.cross.build]
env.volumes = ["A_DIRECTORY=/path/to/volume"]You can put your configuration inside a Cross.toml file
in your project root directory.
By setting the CROSS_CONFIG environment variable, you can tell cross where
it should search for the config file. This way you are not limited to a
Cross.toml file in the project root.
Besides the TOML-based configuration files, config can be passed through environment variables, too.
When running cross from inside a container, cross needs access to
the hosts docker daemon itself. This is normally achieved by mounting the
docker daemons socket /var/run/docker.sock. For example:
$ docker run -v /var/run/docker.sock:/var/run/docker.sock -v .:/project \
-w /project my/development-image:tag cross build --target mips64-unknown-linux-gnuabi64
The image running cross requires the rust development tools to be installed.
With this setup cross must find and mount the correct host paths into the
container used for cross compilation. This includes the original project
directory as well as the root path of the parent container to give access to
the rust build tools.
To inform cross that it is running inside a container set
CROSS_CONTAINER_IN_CONTAINER=true.
A development or CI container can be created like this:
FROM rust:1
# set CROSS_CONTAINER_IN_CONTAINER to inform `cross` that it is executed from within a container
ENV CROSS_CONTAINER_IN_CONTAINER=true
# install `cross`
RUN cargo install cross
...
Limitations: Finding the mount point for the containers root directory is currently only available for the overlayfs2 storage driver. In order to access the parent containers rust setup, the child container mounts the parents overlayfs. The parent must not be stopped before the child container, as the overlayfs can not be unmounted correctly by Docker if the child container still accesses it.
By default, cross tries to use Docker or Podman, in that order.
If you want to choose a container engine explicitly, you can set the
binary name (or path) using the CROSS_CONTAINER_ENGINE
environment variable.
For example in case you want use Podman, you can set CROSS_CONTAINER_ENGINE=podman.
A target is considered as “supported” if cross can cross compile a
“non-trivial” (binary) crate, usually Cargo, for that target.
Testing support (cross test) is more complicated. It relies on QEMU
emulation, so testing may fail due to QEMU bugs rather than bugs in your crate.
That said, a target has a ✓ in test column of the table below if it can run
the compiler-builtins test suite.
Also, testing is very slow. cross test runs units tests sequentially because
QEMU gets upset when you spawn multiple threads. This means that, if one of your
unit tests spawns threads, then it's more likely to fail or, worst, never
terminate.
| Target | libc | GCC | C++ | QEMU | test |
|---|---|---|---|---|---|
aarch64-linux-android [1] |
9.0.8 | 9.0.8 | ✓ | 6.1.0 | ✓ |
aarch64-unknown-linux-gnu |
2.31 | 9.4.0 | ✓ | 6.1.0 | ✓ |
aarch64-unknown-linux-gnu:centos [7] |
2.17 | 4.8.5 | 4.2.1 | ✓ | |
aarch64-unknown-linux-musl |
1.2.3 | 9.2.0 | ✓ | 6.1.0 | ✓ |
arm-linux-androideabi [1] |
9.0.8 | 9.0.8 | ✓ | 6.1.0 | ✓ |
arm-unknown-linux-gnueabi |
2.31 | 9.4.0 | ✓ | 6.1.0 | ✓ |
arm-unknown-linux-gnueabihf |
2.31 | 8.5.0 | ✓ | 6.1.0 | ✓ |
arm-unknown-linux-musleabi |
1.2.3 | 9.2.0 | ✓ | 6.1.0 | ✓ |
arm-unknown-linux-musleabihf |
1.2.3 | 9.2.0 | ✓ | 6.1.0 | ✓ |
armv5te-unknown-linux-gnueabi |
2.31 | 9.4.0 | ✓ | 6.1.0 | ✓ |
armv5te-unknown-linux-musleabi |
1.2.3 | 9.2.0 | ✓ | 6.1.0 | ✓ |
armv7-linux-androideabi [1] |
9.0.8 | 9.0.8 | ✓ | 6.1.0 | ✓ |
armv7-unknown-linux-gnueabi |
2.31 | 9.4.0 | ✓ | 6.1.0 | ✓ |
armv7-unknown-linux-gnueabihf |
2.31 | 9.4.0 | ✓ | 6.1.0 | ✓ |
armv7-unknown-linux-musleabi |
1.2.3 | 9.2.0 | ✓ | 6.1.0 | ✓ |
armv7-unknown-linux-musleabihf |
1.2.3 | 9.2.0 | ✓ | 6.1.0 | ✓ |
i586-unknown-linux-gnu |
2.31 | 9.4.0 | ✓ | N/A | ✓ |
i586-unknown-linux-musl |
1.2.3 | 9.2.0 | ✓ | N/A | ✓ |
i686-unknown-freebsd |
1.5 | 6.4.0 | ✓ | N/A | |
i686-linux-android [1] |
9.0.8 | 9.0.8 | ✓ | 6.1.0 | ✓ |
i686-pc-windows-gnu |
N/A | 9.4 | ✓ | N/A | ✓ |
i686-unknown-linux-gnu |
2.31 | 9.4.0 | ✓ | 6.1.0 | ✓ |
loongarch64-unknown-linux-gnu |
2.36 | 13.2.0 | ✓ | 8.2.2 | ✓ |
mips-unknown-linux-gnu |
2.30 | 9.4.0 | ✓ | 6.1.0 | ✓ |
mips-unknown-linux-musl |
1.2.3 | 9.2.0 | ✓ | 6.1.0 | ✓ |
mips64-unknown-linux-gnuabi64 |
2.30 | 9.4.0 | ✓ | 6.1.0 | ✓ |
mips64-unknown-linux-muslabi64 |
1.2.3 | 9.2.0 | ✓ | 6.1.0 | ✓ |
mips64el-unknown-linux-gnuabi64 |
2.30 | 9.4.0 | ✓ | 6.1.0 | ✓ |
mips64el-unknown-linux-muslabi64 |
1.2.3 | 9.2.0 | ✓ | 6.1.0 | ✓ |
mipsel-unknown-linux-gnu |
2.30 | 9.4.0 | ✓ | 6.1.0 | ✓ |
mipsel-unknown-linux-musl |
1.2.3 | 9.2.0 | ✓ | 6.1.0 | ✓ |
powerpc-unknown-linux-gnu |
2.31 | 9.4.0 | ✓ | 6.1.0 | ✓ |
powerpc64-unknown-linux-gnu |
2.31 | 9.4.0 | ✓ | 6.1.0 | ✓ |
powerpc64le-unknown-linux-gnu |
2.31 | 9.4.0 | ✓ | 6.1.0 | ✓ |
riscv64gc-unknown-linux-gnu |
2.31 | 9.4.0 | ✓ | 6.1.0 | ✓ |
s390x-unknown-linux-gnu |
2.31 | 9.4.0 | ✓ | 6.1.0 | ✓ |
sparc64-unknown-linux-gnu |
2.31 | 9.4.0 | ✓ | 6.1.0 | ✓ |
sparcv9-sun-solaris |
1.22.7 | 8.4.0 | ✓ | N/A | |
thumbv6m-none-eabi [4] |
3.3.0 | 9.2.1 | N/A | ||
thumbv7em-none-eabi [4] |
3.3.0 | 9.2.1 | N/A | ||
thumbv7em-none-eabihf [4] |
3.3.0 | 9.2.1 | N/A | ||
thumbv7m-none-eabi [4] |
3.3.0 | 9.2.1 | N/A | ||
thumbv7neon-linux-androideabi [1] |
9.0.8 | 9.0.8 | ✓ | 6.1.0 | ✓ |
thumbv7neon-unknown-linux-gnueabihf |
2.31 | 9.4.0 | ✓ | N/A | ✓ |
thumbv8m.base-none-eabi [4] |
3.3.0 | 9.2.1 | N/A | ||
thumbv8m.main-none-eabi [4] |
3.3.0 | 9.2.1 | N/A | ||
thumbv8m.main-none-eabihf [4] |
3.3.0 | 9.2.1 | N/A | ||
wasm32-unknown-emscripten [6] |
3.1.14 | 15.0.0 | ✓ | N/A | ✓ |
x86_64-linux-android [1] |
9.0.8 | 9.0.8 | ✓ | 6.1.0 | ✓ |
x86_64-pc-windows-gnu |
N/A | 9.3 | ✓ | N/A | ✓ |
x86_64-sun-solaris |
1.22.7 | 8.4.0 | ✓ | N/A | |
x86_64-unknown-freebsd |
1.5 | 6.4.0 | ✓ | N/A | |
x86_64-unknown-dragonfly [2] [3] |
6.0.1 | 10.3.0 | ✓ | N/A | |
x86_64-unknown-illumos |
1.20.4 | 8.4.0 | ✓ | N/A | |
x86_64-unknown-linux-gnu |
2.31 | 9.4.0 | ✓ | 6.1.0 | ✓ |
x86_64-unknown-linux-gnu:centos [5] |
2.17 | 4.8.5 | ✓ | 4.2.1 | ✓ |
x86_64-unknown-linux-musl |
1.2.3 | 9.2.0 | ✓ | N/A | ✓ |
x86_64-unknown-netbsd [3] |
9.2.0 | 9.4.0 | ✓ | N/A |
[1] libc = bionic; Only works with native tests, that is, tests that do not
depends on the Android Runtime. For i686 some tests may fails with the
error assertion failed: signal(libc::SIGPIPE, libc::SIG_IGN) != libc::SIG_ERR, see issue
#140 for more information.
[2] No std component available.
[3] For some *BSD and Solaris targets, the libc column indicates the OS release version from which libc was extracted.
[4] libc = newlib
[5] Must change
image = "ghcr.io/cross-rs/x86_64-unknown-linux-gnu:main-centos" in
Cross.toml for [target.x86_64-unknown-linux-gnu] to use the
CentOS7-compatible target.
[6] libc = emscripten and GCC = clang
[7] Must change
image = "ghcr.io/cross-rs/aarch64-unknown-linux-gnu:main-centos" in
Cross.toml for [target.aarch64-unknown-linux-gnu] to use the
CentOS7-compatible target.
Additional Dockerfiles for other targets can be found in cross-toolchains. These include MSVC and Apple Darwin targets, which we cannot ship pre-built images of.
You can set the QEMU_STRACE variable when you use cross run to get a backtrace
of system calls from “foreign” (non x86_64) binaries.
$ cargo new --bin hello && cd $_
$ QEMU_STRACE=1 cross run --target aarch64-unknown-linux-gnu
9 brk(NULL) = 0x0000004000023000
9 uname(0x4000823128) = 0
(..)
9 write(1,0xa06320,14)Hello, world!
= 14
9 sigaltstack(0x4000823588,(nil)) = 0
9 munmap(0x0000004000b16000,16384) = 0
9 exit_group(0)
This crate is guaranteed to compile on stable Rust 1.64.0 and up. It might compile with older versions but that may change in any new patch release.
Some cross-compilation targets require a later Rust version, and using Xargo requires a nightly Rust toolchain.
Licensed under either of
- Apache License, Version 2.0 (LICENSE-APACHE or http://www.apache.org/licenses/LICENSE-2.0)
- MIT License (LICENSE-MIT or http://opensource.org/licenses/MIT)
at your option.
Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.
Contribution to this crate is organized under the terms of the Rust Code of Conduct, the maintainer of this crate, the cross-rs team, promises to intervene to uphold that code of conduct.