brumster/EDTracker2

Issues

• Possible GUI rewrite

  #42 opened 2 years ago by DoctorU
  4

• Support ICM-20948

  #41 opened 2 years ago by vanois
  1

• Axes returning to center

  #40 opened 2 years ago by MarceloF1000
  2

• MPU 9250 calculates Gyro Bias forever

  #3 opened 7 years ago by shad00m
  47

• Accel values values red in the UI - 6050 EDTracker

  #39 opened 2 years ago by kosmonautas112
  14

• Automatic yaw axis return center

  #32 opened 4 years ago by Gaastragtx
  4

• Problem with the EDTracker GUI (HELP?!!!)

  #33 opened 2 years ago by KeinEngelZlat
  19

• MPU-9250 sketch is too big for my arduinos memory..

  #37 opened 2 years ago by sibang6477
  2

• I'm so confused, I can't think where to start to adress the problems I encounter, installation problems.

  #38 opened 2 years ago by SweetyVolty
  6

• Missing HEX for Calibration

  #36 opened 2 years ago by tomiko23lol
  0

• Arduino Leonardo + MPU6050 Usb device not recognized

  #26 opened 4 years ago by Fratee
  8

• Can I use the MPU-92/65?

  #35 opened 3 years ago by beerbug
  1

• STM32F103C6T6

  #34 opened 3 years ago by Pheluc
  2

• Cannot connect EDtracker 9250 to the GUI app, despite EDtracker 6050 and calibration firmware working fine

  #18 opened 5 years ago by MorfinWendel
  10

• MPU 9250 calculating gyto bias forever #2

  #31 opened 4 years ago by SPAZv
  7

• Problem with translating to opentrack.

  #30 opened 4 years ago by SPAZv
  1

• Firmware not persisted on device?

  #23 opened 4 years ago by liwp
  6

• Gimbal Lock?

  #29 opened 4 years ago by GMcDowellJr
  11

• Sketch installed by HobbyComponents

  #28 opened 4 years ago by GMcDowellJr
  4

• Mag oops (7)

  #27 opened 4 years ago by CommanderCaveman
  4

• No interrupts from MPU

  #25 opened 4 years ago by FalcoGer
  6

• EDTracker website

  #24 opened 4 years ago by CommanderCaveman
  2

• Host sketch files on github?

  #22 opened 4 years ago by liwp
  1

• Wireless version

  #21 opened 4 years ago by Pheluc
  1

• Cannot connect to device after flashing

  #15 opened 5 years ago by frapell
  14

• Licensing

  #17 opened 4 years ago by joshuahant
  3

• Problem using MPU-9250

  #20 opened 4 years ago by thementony32
  1

• Getting 2 axes only from MPU-9250

  #16 opened 5 years ago by MiOiM
  10

• Losing Arduino Leonardo COM port

  #14 opened 5 years ago by weepop
  4

• MPU-9250 appears to crash/freeze after brief use

  #13 opened 5 years ago by jeremymoran
  4

• too many arguments to function

  #12 opened 5 years ago by privategrim
  5

• Not recognizing after flashing

  #8 opened 7 years ago by PeterSpam
  19

• Startup failure only on a "cold start"

  #10 opened 6 years ago by manoukianv
  9

• Compatible sketch for NodeMCU 8266

  #9 opened 6 years ago by cazzoo
  4

• Will the 9255 work with the 9250 sketch?

  #5 opened 8 years ago by ronyshtamler
  4

• 9150/9250 didnt work with gyro facing down

  #6 opened 7 years ago by tsipa
  2

• GUI serial port crash

  #7 opened 7 years ago by Yury-MonZon
  2

• EDTRacker GUI does not recognize Arduino board (CH340 UART driver)

  #4 opened 8 years ago by padcom
  2

• No Gyro defined

  #2 opened 9 years ago by patrickpoirier51
  4

• Formatting of function defs broken in IDE 1.6.7

  #1 opened 9 years ago by brumster
  1