budulinek

Pinned Repositories

Tasmota
Alternative firmware for ESP8266 and ESP32 based devices with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Full documentation at
Language:C22.5k 623 9.7k4.8k
arduino-altherma-controller
Arduino-based controller for Daikin Altherma heat pumps. The controller connect to the Altherma heat pump via P1/P2 bus, has a built-in webserver for configuration (of the controller itself). Integration to Loxone home automation system via UDP protocol, allows you to monitor and control your Altherma heat pump.
Language:C++53 10 511
arduino-modbus-rtu-tcp-gateway
Arduino-based Modbus RTU to Modbus TCP/UDP gateway with web interface. Allows you to connect Modbus RTU slaves (such as sensors, energy meters, HVAC devices) to Modbus TCP/UDP masters (such as home automation systems). You can adjust settings through web interface.
Language:C++177 14 2552
arduino-onewire-DS2438
Arduino OneWire DS2438 device library.
Language:C++0 1 00
arduino-sensors-udp-gateway
Arduino-based sensor gateway with web interface. Collects data data from sensors (see bellow for supported sensor types) and sends them as a JSON-formatted UDP message.
Language:C++5 3 02
DHTNew
Arduino library for DHT11 and DHT22 with automatic sensor recognition
Language:C++0 1 00
easy-loxone-influx
Loxone to InfluxDB script using UDP logs
Language:Python21 3 17
MAX31865_NonBlocking
Arduino Library for Adafruit MAX31865 RTD Sensor
Language:C++0 1 02
P1P2Serial
P1P2Serial library and P1P2Monitor program for reading Daikin/Rotex P1/P2 bus (a.k.a. P1P2 bus). Write support is planned.
Language:C++0 2 00
Tasmota
Alternative firmware for ESP8266 and ESP32 based devices with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Full documentation at
Language:C0 0 00

budulinek's Repositories

budulinek/arduino-modbus-rtu-tcp-gateway
Arduino-based Modbus RTU to Modbus TCP/UDP gateway with web interface. Allows you to connect Modbus RTU slaves (such as sensors, energy meters, HVAC devices) to Modbus TCP/UDP masters (such as home automation systems). You can adjust settings through web interface.
Language:C++177 14 2552
budulinek/arduino-altherma-controller
Arduino-based controller for Daikin Altherma heat pumps. The controller connect to the Altherma heat pump via P1/P2 bus, has a built-in webserver for configuration (of the controller itself). Integration to Loxone home automation system via UDP protocol, allows you to monitor and control your Altherma heat pump.
Language:C++53 10 511
budulinek/easy-loxone-influx
Loxone to InfluxDB script using UDP logs
Language:Python21 3 17
budulinek/arduino-sensors-udp-gateway
Arduino-based sensor gateway with web interface. Collects data data from sensors (see bellow for supported sensor types) and sends them as a JSON-formatted UDP message.
Language:C++5 3 02
budulinek/arduino-onewire-DS2438
Arduino OneWire DS2438 device library.
Language:C++0 1 00
budulinek/DHTNew
Arduino library for DHT11 and DHT22 with automatic sensor recognition
Language:C++0 1 00
budulinek/MAX31865_NonBlocking
Arduino Library for Adafruit MAX31865 RTD Sensor
Language:C++0 1 02
budulinek/P1P2Serial
P1P2Serial library and P1P2Monitor program for reading Daikin/Rotex P1/P2 bus (a.k.a. P1P2 bus). Write support is planned.
Language:C++0 2 00
budulinek/Tasmota
Alternative firmware for ESP8266 and ESP32 based devices with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Full documentation at
Language:C0 0 00