claudeheintz/LXESP32DMX

Issues

• Is it possible to make a pass through ?

  #36 opened 2 years ago by cgiles
  1

• Problems reading DMX depending on packet size

  #35 opened 2 years ago by mansj
  4

• ESP32 issues - solved with a delay of 25ms . But not without

  #34 opened 2 years ago by julienhogert
  2

• Possibility to use the library with the M5stamp C3U

  #33 opened 2 years ago by julienhogert
  1

• Latest Espressif core 2.02

  #30 opened 3 years ago by midikidi
  2

• Library no longer compiles (abandoned?)

  #32 opened 3 years ago by Smashcat
  1

• Espressif idf port

  #31 opened 3 years ago by midikidi
  0

• RDM Personalities

  #29 opened 3 years ago by midikidi
  0

• Can't get any DMX input working

  #28 opened 4 years ago by fastfourier666
  6

• modified esp32-hal-uart uartEnd Argument Count

  #25 opened 4 years ago by modellking
  6

• 1.0.5 Issues

  #27 opened 4 years ago by IS512
  0

• FastLED Flickering

  #26 opened 4 years ago by IS512
  0

• There’s sometimes an extra “0” inside the stream shifting all values to the next channel.

  #22 opened 5 years ago by satoer
  5

• Delete it... sorry

  #24 opened 5 years ago by Andreadj
  0

• Can't input high number DMX slots

  #13 opened 5 years ago by macdroid53
  5

• Cannot receive input from a DMX console

  #11 opened 5 years ago by mridoni
  7

• Compilation error witch patched hal

  #21 opened 5 years ago by Maka-120774
  2

• Switch between receive & send modes?

  #19 opened 5 years ago by m-elias
  10

• Odroid-GO (ESP-32) does not read the DMX stream

  #20 opened 5 years ago by gustyfeinen
  0

• No input works

  #9 opened 5 years ago by Shamanni
  2

• Removing the need to mod esp32-hal-uart

  #12 opened 5 years ago by seymar
  2

• Multiple DMX Port output

  #7 opened 5 years ago by 4smd
  3

• Documentation

  #6 opened 5 years ago by blassbasti
  1

• Semaphore in ISR

  #18 opened 5 years ago by macdroid53
  1

• Hang on power up

  #17 opened 5 years ago by macdroid53
  0

• Modified hal not compiling

  #16 opened 5 years ago by macdroid53
  1

• PWM resolution and gpio 18 issue.

  #14 opened 5 years ago by julienhogert
  4

• Crashing regularly

  #15 opened 5 years ago by Harkunwar
  3

• Question (newbie): voltage divider values in circuit PDF

  #10 opened 6 years ago by mridoni
  2

• Reset Problem when Wifi is used

  #8 opened 6 years ago by Cubyte
  2

• Wifi won't work with uart DMX

  #1 opened 7 years ago by CoachChuckFF
  3

• DPORT_SET_PERI_REG_MASK and DPORT_CLEAR_PERI_REG_MASK missing

  #2 opened 6 years ago by sajingeo
  1

• Using UART0 instead of UART2

  #3 opened 6 years ago by ririfonfon
  4

• LXHardwareSerial Serial2(2); //must be initialized before ESP32DMX

  #4 opened 6 years ago by peteronksley
  2

• Typo in the include guard in LXESP32DMX.h

  #5 opened 6 years ago by coma0815
  0