Target hardware:
- Any STM32F407/405 based boards with 8MHz oscillator
Pinout:
| PIN/PINS | DESCRIPTION |
|---|---|
| PC10 | STATUS LED |
| PA2/PA3 | TX/RX CAN1 LED |
| PC6/PC7 | TX/RX CAN2 LED |
| PB8/PB9 | CAN1 RX/TX |
| PB5/PB6 | CAN2 RX/TX |
| PB14/PB15 | USB DM/DP |
Features:
- Works out of the box in Linux
- Works with Linux PCAN-View ( needs to install PEAK Linux drivers )
- Works with BUSMASTER and PEAK PCAN-View in Windows
Limits:
- PRO FD firmware does not support FD frames cause bxCAN not supports it, but it will works with classic CAN
- Some protocol specific messages not implemented yet
- Be sure to use PB14/PB15 pins for USB
Toolchain:
- GNU Arm Embedded Toolchain
Tips:
- PRO FD firmware has better performance on windows ( due internal PEAK driver implementation )
Build:
- PCAN PRO firmware
make pro - PCAN PRO FD firmware
make pro_fd - PCAN FD firmware
make fd
WTFPL