collin80/esp32_can

Issues

• Issue importing freertos/FreeRTOS.h

  #49 opened a year ago by msauvayre
  1

• Can't compile using PlatgormIO

  #63 opened 6 months ago by samarkh
  0

• esp32 + sn65hvd230 custom can bus speed

  #62 opened 6 months ago by kamilszczepan
  0

• İs Arduino esp32 not supprting TWAI API?

  #61 opened 6 months ago by fixajteknik
  1

• OBD2 library for esp32_can ported from sandeepmistry

  #60 opened 7 months ago by MagnusThome
  0

• no CAN message reception with Listen Only Mode

  #59 opened 7 months ago by rvxfahim
  0

• Any hints how to run on an ESP32-S3? (SOLVED with vTaskDelay(1); as found by lordryck)

  #54 opened 10 months ago by MagnusThome
  4

• ESP32 crash or wont initialize

  #57 opened 9 months ago by notsolowki
  3

• beginAutoSpeed Crashes ESP32

  #56 opened 9 months ago by bl1tz3n4
  1

• CAN Reliable timings possible?

  #55 opened 9 months ago by mickeyl
  1

• Hanging in task_LowLevelRX

  #52 opened a year ago by lordryck
  8

• Receive message drop with CAN1 MCP2515

  #53 opened 10 months ago by jeroenveer
  1

• Assert failed after rebooting

  #51 opened a year ago by moeen-sa
  1

• assert failed: spinlock_acquire spinlock.h:122

  #48 opened a year ago by MrDIYca
  4

• ESP crashes when you add attachInterrupt

  #47 opened a year ago by jeroenveer
  5

• CAN/TWAI Support for ESP32-C3 ?

  #36 opened a year ago by heliophagus
  12

• sending multiple CAN frames

  #46 opened a year ago by weeblebiker
  2

• beginAutoSpeed()

  #41 opened 2 years ago by microElabDevelop
  2

• Add support for ESP-IDF framework

  #17 opened a year ago by codingoverdrive
  2

• Can Termination

  #37 opened a year ago by djgabriel2004
  1

• Auto baud-rate

  #16 opened 4 years ago by Deivik12
  9

• #warning esp_intr.h is deprecated, please include esp_intr_alloc.h instead

  #39 opened 2 years ago by JimNickerson
  7

• Add support for low bitrates

  #44 opened a year ago by bakermat
  2

• Compilation error with Arduino Due (missing headers)

  #27 opened a year ago by ibmthinkpad
  1

• receivng garbage value while getting VIN on car engine.

  #43 opened 2 years ago by microElabDevelop
  0

• HELLO, i tried esp32 with mcp2515 bun not working

  #40 opened 2 years ago by lepromer
  6

• library is not working with esp32-s3

  #35 opened 2 years ago by pawelka
  2

• Disable Interupt Pin on 2515.h

  #32 opened 3 years ago by Gcopper22
  2

• Priority inversion

  #42 opened 2 years ago by kentindell
  0

• SparkFun Thing Plus

  #38 opened 2 years ago by bvernham
  0

• Why does CAN0 have to be declared in the global namespace?

  #24 opened 2 years ago by j4m3s
  2

• getting started

  #34 opened 2 years ago by qubolino
  3

• DTC Error Codes

  #33 opened 2 years ago by ale1800
  2

• Interrupt wdt timeout on CPU1 when trying to switch between UART and CAN

  #31 opened 3 years ago by brandonros
  0

• Can you explain this: digitalWrite(GPIO_NUM_16, LOW); //enable CAN transceiver

  #30 opened 3 years ago by brandonros
  0

• call of overloaded 'abs(uint32_t)' is ambiguous

  #28 opened 3 years ago by brandonros
  0

• Core Panic

  #15 opened 5 years ago by MagnusThome
  6

• Interrupts not noticed when ESP32 is heavily loaded

  #25 opened 4 years ago by j4m3s
  5

• Frame/ message timestamp not set by ESP32

  #18 opened 4 years ago by j4m3s
  1

• Using this library with Arduino Due

  #14 opened 5 years ago by AlexandreBras
  1

• Some examples needed

  #1 opened 6 years ago by maoiot
  10

• SJA1000 resets on arbitration failure interrupt

  #12 opened 5 years ago by driftregion
  0

• ESP32RET CAN1 TX Queue overflow

  #8 opened 5 years ago by driftregion
  12

• Guru Meditation Error in `task_MCPCAN`

  #9 opened 5 years ago by driftregion
  2