coloradocube/balloonsat

Issues

• Multiple processes for FE, telemetry, camera, and rockblock

  #57 opened 3 years ago by ivogeorg
  0

• Read and log GPS receiver

  #50 opened 3 years ago by ivogeorg
  2

• Record stills and video clips with RPi high-quality camera

  #81 opened 3 years ago by ivogeorg
  1

• The camera code should be in a separate process

  #80 opened 3 years ago by ivogeorg
  0

• Micro SD card partitioned into OS, telemetry, and imaging

  #56 opened 3 years ago by ivogeorg
  0

• Loose pins connecting quad camarray to RPi HAT

  #66 opened 3 years ago by ivogeorg
  1

• Capture still images with quad camarray

  #54 opened 3 years ago by ivogeorg
  2

• Record video with quad camarray

  #55 opened 3 years ago by ivogeorg
  1

• GPS should be in its own thread in the telemetry process or a separate process

  #78 opened 3 years ago by ivogeorg
  0

• Set GPS to Flight Mode

  #62 opened 3 years ago by ivogeorg
  0

• Conflict between RockBLOCK and headless RPi

  #30 opened 3 years ago by ivogeorg
  2

• Auto startup and pre-flight check of flight executive after power on

  #74 opened 3 years ago by ivogeorg
  0

• Monitor if RPi is being throttled

  #47 opened 3 years ago by ivogeorg
  3

• Controllable heating of the balloonsat internal environment

  #38 opened 3 years ago by ivogeorg
  1

• Test the effect of a sensor failing on the telemetry gathering code

  #77 opened 3 years ago by ivogeorg
  0

• RockBLOCK should be in a separate process

  #79 opened 3 years ago by ivogeorg
  0

• Outdoor test with GPS

  #59 opened 3 years ago by ivogeorg
  2

• Outdoor telemetry via RockBLOCK & external antenna

  #61 opened 3 years ago by ivogeorg
  3

• Adafruit RockBLOCK library limits sent text to 120 bytes

  #76 opened 3 years ago by ivogeorg
  0

• Send telemetry over RockBLOCK

  #51 opened 3 years ago by ivogeorg
  0

• Headless RPi administration

  #60 opened 3 years ago by ivogeorg
  1

• Missing 3.3V connection on RPi Qwiic hat

  #75 opened 3 years ago by ivogeorg
  2

• Capture still images with camera

  #52 opened 3 years ago by ivogeorg
  1

• Web service for telemetry

  #73 opened 3 years ago by ivogeorg
  0

• Beam camera images/video from RPi to ground via WiFi

  #31 opened 3 years ago by ivogeorg
  24

• Balloonsat development setup

  #72 opened 3 years ago by ivogeorg
  0

• Setup procedure & test protocol

  #42 opened 3 years ago by ivogeorg
  0

• Outdoor test of RockBLOCK

  #58 opened 3 years ago by ivogeorg
  2

• Outdoor test of RockBLOCK through black foam shell roof

  #64 opened 3 years ago by ivogeorg
  1

• Monitor and log daisy-chained sensors

  #49 opened 3 years ago by ivogeorg
  0

• Monitor voltage & current with Qwiic sensor

  #48 opened 3 years ago by ivogeorg
  1

• FE v0.0.1 - Startup and shutdown

  #43 opened 3 years ago by ivogeorg
  0

• FE v0.0.1 - Startup and shutdown with UPS

  #44 opened 3 years ago by ivogeorg
  1

• Startup, power check, and shutdown

  #40 opened 3 years ago by ivogeorg
  1

• Capture video with camera

  #53 opened 3 years ago by ivogeorg
  1

• Stream video from RPi WiFi hotspot

  #63 opened 3 years ago by ivogeorg
  1

• Mount external antennas outside on top of box

  #67 opened 3 years ago by ivogeorg
  0

• FE v0.0.3 - Shut down RPi on low battery

  #46 opened 3 years ago by ivogeorg
  1

• Send gps/iridium coms data to jim

  #35 opened 3 years ago by dperry29
  0

• Buy external patch antenna for RockBLOCK

  #36 opened 3 years ago by ivogeorg
  0

• Find/Build FCC Regulations Acceptable Amplifier for 2.4Ghz (Wifi) signal.

  #71 opened 3 years ago by Christopher-Dauchter
  0

• [Non-Critical Feature] Add realtime Telemetry data on the video stream webpage.

  #70 opened 3 years ago by Christopher-Dauchter
  0

• Wifi Access Point sometimes doesnt reserve an IP address within it's range if setup script is ran on ethernet connection.

  #69 opened 3 years ago by Christopher-Dauchter
  0

• Wifi Access Point Setup Script sometimes doesnt start dnsmasq on install/autostart

  #68 opened 3 years ago by Christopher-Dauchter
  0

• FE v0.0.2 - Read the voltage and capacity from UPS

  #45 opened 3 years ago by ivogeorg
  0

• Mechanical - finalizing the shell - TWO issues

  #39 opened 3 years ago by DannyS10
  0

• Mechanical Shopping list - OR - Bring Your Own

  #33 opened 3 years ago by DannyS10
  0

• Freeze-test RPi

  #37 opened 3 years ago by ivogeorg
  0

• Webpage camera streaming integration with Arducam Quadrascopic Camera

  #34 opened 3 years ago by Christopher-Dauchter
  0

• Environmental temp failure

  #32 opened 3 years ago by NotfatPrince
  0