crankyoldgit/IRremoteESP8266

Issues

• Adding night mode for Mistubishi Electric air con

  #2054 opened 4 months ago by bachtron
  2

• Carrier AC 84bit

  #2075 opened 2 months ago by RBroks
  2

• The IT Receiver sensor (SM0038) is receiving signals and reporting values even when not pressing any button in the remote.

  #2071 opened 2 months ago by sathyashriya
  0

• ESP32 S2 and Wifi = AC code sending interrupted

  #2025 opened 8 months ago by Insomniac80
  2

• Need help for Panasonic Remote Control N2QAYB000354

  #2065 opened 2 months ago by stieneker
  0

• Fails to detect Hitachi AC Remote. Sending raw data also does not work

  #2063 opened 2 months ago by vgahlaut
  9

• USB CDC must be enabled on ESP32S3 in order to receive infrared signals correctly.

  #2061 opened 2 months ago by Tinyu-Zhao
  1

• IRremoteESP8266 library compile error bk7231t

  #2059 opened 3 months ago by DevineCZ
  1

• DECODE_HASH should get its own protocol type

  #2057 opened 3 months ago by uwekaditz
  9

• Compile Error in ESP32 IDF when including IRemoteESP8266 as a component

  #2055 opened 3 months ago by suffiyanshaikh
  1

• Library's Non-declared variables & too many arguments to function issues.

  #2053 opened 4 months ago by QnBarb
  1

• help with irsend AC commands convert String to unsigned char array

  #2051 opened 4 months ago by jayantdyfo
  1

• Panasonic AC 128bit

  #2042 opened 6 months ago by mrninhvn
  1

• IRremoteESP8266 library sending wrong when send signal of 32 bits

  #2049 opened 4 months ago by Teslaxxx
  4

• About the ESP32-C3 infrared correlation

  #2014 opened 9 months ago by hzhh110
  22

• I might help improving KELVINATOR protocol (Timer function)

  #2045 opened 5 months ago by MaBoCoMark
  1

• Feature Request: Support for esp32 Arduino 3.0.0

  #2039 opened 6 months ago by Jason2866
  12

• `sendNEC()` function has no NEC redundant bits implemented

  #2043 opened 6 months ago by StachRedeker
  1

• Help debugging Toshiba AC decoding mishaps

  #2038 opened 7 months ago by njoyard
  5

• Airwell - toggling power on every state change

  #2035 opened 8 months ago by mbrevda
  6

• Mitsubishi Heavy 88-bit A/C - Fan and Mode cannot be set

  #2037 opened 7 months ago by kodjo80
  5

• RCMM Decoding is not working consistently

  #2031 opened 8 months ago by cjkarande
  6

• Panasonic CS-E12QKEW

  #2026 opened 8 months ago by duczz
  3

• Even the examples don't work

  #2004 opened 8 months ago by ParagDas2315
  4

• Help Needed (re: Mixiaoxiao / ESP8266-IR-HOMEKIT)

  #2027 opened 8 months ago by loyukfai
  2

• Facing Issue while added new ir library

  #2024 opened 8 months ago by Vrushabhgada
  7

• MITSUBISHI_AC Conditioner Can Not be Turned off

  #2022 opened 9 months ago by cnfniw
  0

• Is there any protocol for Dawlance Ac which i can use

  #2019 opened 9 months ago by BPOTW
  1

• I use a Whirlpool (Galactic) air conditioner with an IR remote control DG11J1-91

  #2017 opened 9 months ago by TokarevSergey
  0

• About Coolix

  #2012 opened 9 months ago by hassbian-ABC
  21

• Irremoteesp8266 and rfrh22 from radiohead

  #2013 opened 9 months ago by Vorms
  3

• Request for RecPro / Houghton RV Air Conditioner Protocol

  #2009 opened 10 months ago by mrmees
  6

• When SEND_LG is true and SEND_SAMSUNG is false compilation fails

  #2010 opened 9 months ago by dilyanpalauzov
  4

• Gree protocol sending issue using IRac class

  #2007 opened 10 months ago by HomeKidd
  4

• Samsung AC - "Clean" automatically gets toggled by the AC unit

  #2006 opened 10 months ago by bogd
  4

• Skip compiling module Y if both DECODE_Y and SEND_Y are not defined

  #2000 opened 10 months ago by dilyanpalauzov
  7

• Panasonic CS-E12QKEW SwingH not working

  #1999 opened 10 months ago by duczz
  12

• Compile errors with esp8266/Arduino 3.1.2

  #2001 opened 10 months ago by igor-d-n
  3

• TCL 112 Protocol HalfDegree Wrong Position

  #1998 opened a year ago by kickit2
  2

• wifi.begin add error in IR receiving code

  #1995 opened a year ago by fotosettore
  19

• Error when compiling IRMQTTServer code

  #1997 opened a year ago by Jadyla
  2

• I ended up having the same problem, and realised the root cause: in sendAc() in src/IRac.cpp, we are not passing the sleep parameter. Specifically:

  #1991 opened a year ago by crankyoldgit
  0

• Calling IRrecv.enableIRIn() after calling IRrecv.enableIRIn() fails to attach timer handler

  #1983 opened a year ago by homy-newfs8
  4

• Adding Panasonic Ceiling Light Remote Data to IRremoteESP8266 Library

  #1976 opened a year ago by bennyyagiyama
  5

• YKR-H/531E (Electrolux AC)

  #1980 opened a year ago by lukg20
  1

• Wiki page ir-sending is missing 2 resistors

  #1968 opened a year ago by ArminJo
  11

• Is the remote control model YADOF not yet supported?

  #1978 opened a year ago by lijiazhiren
  0

• ESP32 mark timing errors in IRremote

  #1974 opened a year ago by ArminJo
  6

• DAIKIN ARC433A73 DATA Read Issue

  #1972 opened a year ago by PaulAnurag
  1

• Decoding Benchmark DAC 3 remote protocol issue

  #1966 opened a year ago by iamelec
  8