hvac
There are 192 repositories under hvac topic.
crankyoldgit/IRremoteESP8266
Infrared remote library for ESP8266/ESP32: send and receive infrared signals with multiple protocols. Based on: https://github.com/shirriff/Arduino-IRremote/
SwiCago/HeatPump
Arduino library to control Mitsubishi Heat Pumps via connector cn105
geoffdavis/esphome-mitsubishiheatpump
ESPHome Climate Component for Mitsubishi Heatpumps using direct serial connection
Arnold-n/P1P2MQTT
Monitor and control Daikin/Rotex (hybrid/Altherma) heat pumps via the 2-wire P1/P2 thermostat interface with an ATmega328P, ESP8266, and electronics. The P1P2Serial library and P1P2Monitor program perform low-level bus operation, the P1P2-bridge-esp8266 program interprets data from/to MQTT supporting Home Assistant MQTT discovery. P1P2Serial may also be used for other Japanese Home Bus System based standards: DIII-NET (F1/F2) bus, Mitsubishi M-Net bus, Toshiba TCC-Link, Hitachi H-link, Panasonic/Sanyo SIII-Net, Haier, York, and others.
DomiStyle/esphome-panasonic-ac
Open source alternative for Panasonic air condition wifi adapters that works locally without the Comfort Cloud
fredlcore/BSB-LAN
LAN/WiFi interface for Boiler-System-Bus (BSB) and Local Process Bus (LPB) and Punkt-zu-Punkt Schnittstelle (PPS) with a Siemens® controller used by Elco®, Brötje®, Atlantic® and similar heating systems
psychrometrics/psychrolib
📚 Library of psychrometric functions to calculate 🌡️ thermodynamic properties of air for Python, C, C#, Fortran, R, JavaScript and VBA/Excel
GrKoR/esphome_aux_ac_component
ESPHome component for AUX based air conditioners. Direct wifi control of HVAC by ESPHome and Home Assistant. HVAC status and command feedback are available.
arthurkrupa/gree-hvac-mqtt-bridge
MQTT Bridge for controlling Gree smart air conditioners, e.g. with Home Assistant or OpenHAB
omerfaruk-aran/esphome_samsung_hvac_bus
ESPHome Samsung HVAC Integration is an ESPHome component that connects and controls Samsung HVAC units (air conditioners and heat pumps) via a hardware bus (F1/F2 lines). It supports both NASA and NonNASA protocols, enabling multisplit control, temperature monitoring, energy tracking, and real-time notifications, enhancing your smart home setup.
JanM321/esphome-lg-controller
Wired controller for LG HVAC units using ESPHome and ESP32
azogue/psychrochart
A Python 3 library to make psychrometric charts and overlay information on them.
dalinicus/homeassistant-acinfinity
AC Infinity integration for Home Assistant for UIS based controllers
michaelarnauts/comfoconnect
Python Zehnder ComfoConnect LAN C library to interface with ComfoAir Q350/450/600 units.
daniloc/ThermTerm
Open source heat pump controller and home automation terminal, built on ESP32
DannyDeGaspari/Samsung-HVAC-buscontrol
Protocol description of the serial communication channel of Samsung airconditioners.
joshbenner/esphome-daikin-s21
ESPHome Component for Daikin Mini-Splits using the S21 serial port.
Jeroen88/EasyOpenTherm
OpenTherm library to create thermostat for OpenTherm enabled boilers and HVACs using an OpenTherm controller and an ESP32 or other microcontroller
bbartling/open-fdd
Fault Detection Diagnostics (FDD) for HVAC datasets
TomLXXVI/python-hvac
A multi-package for HVAC engineering written in Python.
diyless/home-assistant-opentherm-thermostat
Home Assistant OpenTherm Thermostat
CyrilWaechter/pyRevitMEP
PyRevitMEP - MEP Extensions for PyRevit
mongoose-os-apps/mel-ac-homekit
Mitsubishi Electric AirCo (conditioner) and ATW (heat pump) control for HomeKit
gcormier/esphome-pressure
esphome board with a differential pressure sensor, supporting a variety of power sources
armancodv/building-energy-model-matlab
It is a small software which is developed by MATLAB for modeling the energy system of a building or HVAC system.
Enapter/marketplace
Enapter Blueprint Marketplace – integrate any device into your Energy Management System. 🔋 🔌 👩🏽💻 👨💻
issalig/toshiba_air_cond
AB protocol decoder for toshiba air conditioners
g3tsyst3m/HVACScanner
Locates Honeywell/Tridium/Niagara HVAC JACEs/Controllers via HTTP fingerprints/strings. Very handy for vulnerability/pentesting.
echoromeo/pynobo
Python 3 TCP/IP interface for Nobø Hub / Nobø Energy Control
marcoboers/home-assistant-quatt
Unofficial Quatt heat pump integration for Home Assistant
nickneos/HA_harmony_climate_component
❄ Use a Harmony Hub to control an IR controlled climate device
superrob/genvexconnect
Integrate your Genvex Connect/Nilan Gateway locally into your Home Assistant setup
BeamCtrl/Airiana
SystemAir Modbus Ventilaton Controller VR400/VR700/VTR300/VSR300/SaveCair
echoromeo/hanobo
Home Assistant implementation of pynobo - to control Nobø / Glen Dimplex heaters
rsnodgrass/hass-lunos
LUNOS HRV Ventilation Fan Control for Home Assistant
bekmansurov/gree-hvac-protocol
Description of data exchange protocol for GREE air conditioners via UART based on reverse engineering