geoffdavis/esphome-mitsubishiheatpump
ESPHome Climate Component for Mitsubishi Heatpumps using direct serial connection
C++BSD-2-Clause
Issues
- 0
Component esphome.coroutine is marked FAILED
#151 opened by GermanCaruncho - 2
Compile error: src/esphome/components/mitsubishi_heatpump/espmhp.cpp:454:46: error: comparison between distinct pointer types 'HardwareSerial*' and 'HWCDC*' lacks a cast
#144 opened by jpgnz - 3
- 5
ESPHome 2024.4 compilation errors
#146 opened by ztox - 1
Fan Modes in HA MSZ-RW25
#147 opened by haraldhh - 0
- 0
Provide a sensor for set fanspeed?
#148 opened by haraldhh - 7
Numbered fan speed modes?
#135 opened by Arn0uDz - 0
NTXUKS Model not communicating
#145 opened by omarsheikh - 1
Add DRY mode
#137 opened by RikBast - 8
swing mode 1, 2, 3, 4, 5
#136 opened by Enjoy-Combi - 3
My device works sometimes but, after shows IDLE.
#139 opened by jesus51998 - 10
Warning about coroutine taking a long time.
#129 opened by lloydc99 - 3
- 0
Turning on climate doesn’t remember last state
#142 opened by Protoncek - 0
Using the ESPHome Uart component
#141 opened by danolson1 - 9
random disconnections
#95 opened by diybateriaslifepo4 - 1
External sensor types and temperature deltas
#140 opened by donutsoft - 2
how to set control over fan speed from web server?
#138 opened by Grappa2020 - 3
- 3
Blue led flashing regularly on ESP-01
#132 opened by enomam - 8
- 1
Query - How to build locally
#115 opened by netmindz - 5
Air to Water heat pumps
#96 opened by Ulrar - 2
Impossible to connect to the heatPump
#134 opened by yann500 - 1
- 14
HR25VF only in web interface
#127 opened by xtypebox - 0
- 0
Storing working example files
#128 opened by danolson1 - 5
Set point changes
#123 opened by oot64mm64 - 1
- 1
Can't change fan mode : error 104
#83 opened by carlito13500 - 1
ESPHome Compile Error: "'optional' in namespace 'std' does not name a template type"
#117 opened by johndbritton - 3
Target temperature revert to previous setting
#112 opened by dark-nico - 1
- 5
Support for CNS port boards
#113 opened by ColdTurkeycnc - 3
hvac_action Update
#110 opened by javilopezalarcon - 12
Warning: Component esphome.coroutine took a long time for an operation (0.10 s).
#107 opened by kbarnes3 - 1
- 9
Add extra options via different components
#90 opened by flybrys - 1
HeatPump.h: No such file or directory
#106 opened by raman325 - 1
- 5
- 2
- 3
Zone control?
#100 opened by bleomycin - 0
Perfectly working with 4 but not the fifth one
#94 opened by Daedrix33 - 0
- 1
3.3v power from the Ecodan cylinder motherboard?
#81 opened by joenye - 3
Support for dual set-point controls
#77 opened by LubergAlexander - 0
Support for temperature offset?
#79 opened by elmoret