DomiStyle/esphome-panasonic-ac

Issues

• [INFO] Some ESP32 feedback

  #111 opened a year ago by jellewie
  15

• Retrofit failed

  #69 opened 2 years ago by ttsmarco
  9

• Defrost state

  #125 opened 3 months ago by frassefraze
  0

• Panasonic CS-E9NKR ESP01_1M attempt

  #124 opened 3 months ago by Mrsash2020
  2

• OTA installation does not work anymore

  #85 opened 2 years ago by zioCristia
  3

• Change Custom Preset from Normal to Powerful

  #123 opened 3 months ago by toothrup
  0

• Help debugging interface for Panasonic CZ-CAPWFC1

  #63 opened 2 years ago by Aidan-Chey
  18

• Slow/none response sometimes using Pansonic Z35UFEAW-1 (CZ-TACG1)

  #122 opened 4 months ago by jkaberg
  0

• [Feature Request] Customize (Translate) values of dropdowns

  #121 opened 6 months ago by CSchlipp
  0

• New CS-Z25ZKEW, no reaction on RX/TX (*solved* by changing GPIOs)

  #119 opened 6 months ago by wunderbaum
  5

• Help: Can't compile firmware with eco_switch (invalid option)

  #117 opened 6 months ago by kaislaoja
  1

• Power consumption when 2 indoor units on one outdoor unit

  #86 opened 2 years ago by HA-TB303
  8

• Help to uncomment remote function

  #115 opened 10 months ago by lollo78
  3

• An error occurred during the update process

  #114 opened 10 months ago by nguyenquangduc
  0

• Current Temperature showing as nan

  #113 opened 10 months ago by kenchy
  4

• Swing mode - invalid options shown

  #112 opened a year ago by jellewie
  0

• Read vertical swing mode via REST api?

  #109 opened a year ago by pontusfischer
  6

• Compatibility question ?

  #108 opened a year ago by acca84
  1

• where to buy cable that fits pannasonic pump?

  #70 opened 2 years ago by torsteinelv
  24

• A little over my head - question about prebuilt esp boards.

  #102 opened a year ago by jack3308
  1

• MQTT data

  #104 opened a year ago by jemarr
  3

• How to enable Quiet mode?

  #105 opened a year ago by MEKadan
  0

• New Feature request : Reduce/Increase polling interval ?

  #106 opened a year ago by AlexDelm
  1

• Not working on CS-Z35XKEW / probably new protocol/change?

  #94 opened 2 years ago by jonasf21
  26

• CS-Z (etherea) compatibility

  #68 opened 2 years ago by CrashOverride-Git
  10

• Error codes

  #100 opened a year ago by cleveHEX
  0

• Unable to get it working on a CS-Z25UD3EAW (ducted unit)

  #96 opened a year ago by CamielFolmer
  7

• Please guide, error

  #99 opened a year ago by hudako417
  0

• Mild Dry Switch keeps getting off

  #89 opened 2 years ago by michas79de
  5

• Compatibility with in-roof ducted reverse cycle models (heat pump)

  #98 opened a year ago by skellycode
  2

• external temperature sensor

  #97 opened a year ago by sygys
  1

• Getting a packet with invalid checksum

  #82 opened 2 years ago by nikarh
  3

• How to debug?

  #92 opened 2 years ago by JshGrn
  10

• Compilig with ESPHOME 2023.4.0 gives some errors

  #90 opened 2 years ago by alex-v-fraser
  6

• Temperature Sensor Decimals

  #91 opened 2 years ago by filou01
  3

• IDLE states on ducted unit

  #87 opened 2 years ago by JeromeChignola
  2

• Custom preset seem to be missing (Normal, Quiet, Powerful)

  #84 opened 2 years ago by profigriller
  10

• Support for action

  #83 opened 2 years ago by jmichiel
  4

• MQTT

  #62 opened 2 years ago by autoSteve
  8

• Unable to update

  #80 opened 2 years ago by sygys
  5

• auto vertical swing error

  #79 opened 2 years ago by marcolega
  4

• outside_temperature accuracy

  #78 opened 2 years ago by MEKadan
  1

• Ethernet

  #65 opened 2 years ago by marcolega
  3

• No power to esp32 from ac.

  #81 opened 2 years ago by torsteinelv
  3

• The temperature always change to 24 degree when change temperature to any value.

  #72 opened 2 years ago by rotijohn87
  2

• MQTT control

  #71 opened 2 years ago by olivr2s
  2

• DNSK-P11 Power Consumption

  #66 opened 2 years ago by bigjme93
  13

• many errors

  #67 opened 2 years ago by torrbyll
  2

• Failing to compile

  #64 opened 2 years ago by Mark-Longley
  5

• Compatibility with PAW-FC2A-K009

  #61 opened 3 years ago by kukacwap
  7