Issues
- 10
Visonic Motion and Contact Sensors all unavailable since updating HA to 2023.12.4
#101 opened by HumanSkunk - 1
- 8
Using this integration and the PowerLink module?
#99 opened by TopGgg - 4
Unable to connect
#98 opened by johansmitsnl - 4
Silent activation
#96 opened by de-Bat - 2
- 5
Sabotage alarm during reboot
#89 opened by phoenix-blue - 2
Entity name wrong in events
#95 opened by herwinjan - 6
Incorrect model and sensor type
#94 opened by rogerthn2019 - 15
PowerMax Pro Panel often Reset
#86 opened by Joao-Sousa-71 - 3
Alarm panel not triggered
#93 opened by marcolega - 5
Phone Alerts
#92 opened by de-Bat - 1
Way to obtain and use zone names
#91 opened by ambhargava - 2
remote programming
#90 opened by de-Bat - 1
- 10
Manual Enroll
#87 opened by de-Bat - 4
USB Port Changes on OS Restart
#81 opened by skykingisepic - 5
Constant disconnections
#85 opened by uspino2 - 14
Powermaster 33 disconnecting when alarm sounds
#70 opened by gregdcBe - 4
Powermaster 30 PIR motion
#72 opened by pbathuk - 78
- 9
Log Warning Message - Error setting up entry Panel 0 (PowerMax Pro) for binary_sensor
#84 opened by Joao-Sousa-71 - 2
- 19
- 2
- 1
- 3
Fails to Disarm - Solved
#80 opened by skykingisepic - 13
TCP connection refused -
#78 opened by Fitzpap - 2
- 3
New values for MCT-302
#74 opened by open1999 - 2
powermax plus pinout
#75 opened by de-Bat - 1
LOST BBA CONNECTION
#69 opened by louisdcmr - 2
Failed to connect to Visonic Alarm
#68 opened by Johnyb62 - 3
won't connect to panel
#73 opened by Marrut - 4
Unstable integration
#67 opened by martin-tastensen - 5
Support for wireless siren Device S00
#56 opened by Fabio72 - 21
Connection error
#62 opened by phoenix-blue - 8
Warning: Valid 4 digit pin not found
#65 opened by martin-tastensen - 7
Visonic integration trigger arming is only working for armed_away, not for armed_home
#64 opened by rhannink - 8
Version 0.8.2.1 can't read Powermax Pro
#66 opened by jorgebnunes - 2
Powermax+ panel does not send "zone open" status
#61 opened by rhannink - 3
Powermax Pro lose connection con Home Assistant
#63 opened by robermf - 1
- 1
Comm Issues Latest Upgrade
#59 opened by skykingisepic - 0
Powermax+ No Longer Downloads
#58 opened by skykingisepic - 1
RS 232 cable
#57 opened by berg78 - 3
- 1
Error after update
#52 opened by phoenix-blue - 6
The integration says "no data has been received from the panel" but the panel is showing an update message
#54 opened by ekutner - 16
Setup error at integration's setup
#53 opened by hirofairlane