Issues
- 0
- 6
tilib on OpenBSD
#97 opened by hosewiejacke - 1
- 2
MSP430F2618 detected as MSP430F2619
#124 opened by maribu - 0
MSP430FRxxx Support?
#123 opened by anthonyclark-as - 3
Trouble making the executable in Windows.
#111 opened by JazzJackson0 - 0
Can't program my device using CP2102N 28pin
#121 opened by oyildirim - 2
Can't build on Gentoo: usb.h: No such file
#119 opened by GrantEdwards - 10
Unable to connect with GPIO driver
#48 opened by dalmago - 2
Trouble flashing binary using `prog` command
#117 opened by fpedd - 1
Won't compile (seen on MacOS but seems universal).
#113 opened by sorber - 7
- 0
Not documented hardware multiplier
#109 opened by zhaoleicpp - 0
push SR reg goes wrong when PC>=0x10000
#108 opened by zhaoleicpp - 1
MSP430_OP_RLAM gives bad MSP430_SR_Z bit
#107 opened by zhaoleicpp - 0
step_pushm_popm not use is_aword
#106 opened by zhaoleicpp - 1
- 4
MSP430g2553 doesn't work
#102 opened by MarcoAAG - 8
- 5
regs problem with MSP430F233
#94 opened by iddq - 24
support for Launchpad EXP430GET
#81 opened by dlarue - 4
- 7
gdb and mspdebug communication
#78 opened by jlbirccyn - 3
prog command fails to erase Info A memory
#98 opened by thiloschulz - 4
- 14
Is flash-bsl without mass-erase possible?
#82 opened by DocSneider - 4
- 4
- 1
CPUX support for simulation target
#91 opened by thiloschulz - 1
Compiled Software Breakpoints
#89 opened by cr1901 - 1
jtaglib support for the MSP430Xv2 architure
#87 opened by smunaut - 3
- 8
No unused FET found
#85 opened by hanhpd - 3
Write failure error code 7
#84 opened by bommuuu - 9
Simulating UART
#83 opened by chrissphinx - 12
MSP430FR2433 Launchpad (ez-FET) troubles
#43 opened by crosser - 3
- 3
Is MSPDEBUG_TILIB_PATH broken on Windows?
#75 opened by melak - 3
Linux: Ti launchpad is not detecting
#74 opened by harielamadu - 2
simio Timer_B support
#68 opened by tgtakaoka - 0
- 2
- 2
- 2
- 2
Can't write 2 bytes into word peripheral space
#64 opened by tgtakaoka - 2
- 1
- 4
simio console ignores newlines
#59 opened by hosewiejacke - 1
MSP-EXP430F5438 Firmware download failed
#42 opened by kapardine - 1