dlktdr/HeadTracker

Issues

• Arduino Nano 33 BLE Rev2

  #178 opened 2 months ago by deniz-derin
  8

• DTQSYS running version 2.21 has constant pan drift

  #181 opened 2 months ago by igdianov
  1

• Not being able to connect to DTQSYS board via bluetooth

  #180 opened 2 months ago by Zuzle
  2

• frsky ethos, traint bluetooth mode disable ch 1-4

  #179 opened 2 months ago by Asafsol
  0

• impossible to calibrate and get IMU signal ABX 00071

  #173 opened 4 months ago by samsab1
  19

• REQUEST: BLUETOOTH assignement

  #176 opened 3 months ago by samsab1
  1

• arduino nano 33 ble FW 2_3pre no BLE connection possible

  #168 opened 3 months ago by boomerschnecke
  1

• only short bluetooth connection

  #160 opened 3 months ago by TheFoxy
  2

• PPM input not working on a Futaba 8FG

  #157 opened 3 months ago by jerem94000
  1

• Futaba 8FG - PPM - can't use channel after 8

  #158 opened 3 months ago by jerem94000
  8

• ABX00069Drift problems

  #161 opened 3 months ago by tianbin4729
  3

• arduino nano 33 ble FW 2.21 resetting periodically all 35seconds

  #167 opened 3 months ago by boomerschnecke
  2

• is it possible to assign channels higher than N°8 in bluetooth.

  #175 opened 3 months ago by samsab1
  1

• export roll, tilt, pan values through pins

  #174 opened 4 months ago by TalalSultan
  5

• ELRS Backpack wireless headtracker function support

  #154 opened a year ago by xuhao1
  8

• No IMU output on nano 33 BLE Rev2 with fw 2.2

  #166 opened 6 months ago by totorus
  8

• Drift on pan, wired to trainer port, Help!

  #172 opened 5 months ago by LeonRemidy
  2

• Possibility to have 16 channel over Bluetooth

  #148 opened 6 months ago by pierrotm777
  2

• Win32 app

  #156 opened 6 months ago by Shortcircuitboards
  1

• Windows 11 support

  #163 opened 6 months ago by bxrogers
  2

• arduino nano 33 ble FW 2_4pre no BLE connection possible, but gets deleted with reboot

  #169 opened 6 months ago by boomerschnecke
  16

• Unable to open bossac_mac

  #155 opened a year ago by pguillory
  4

• support for the BLE33 IOT nano

  #162 opened 9 months ago by DanielOBenson
  1

• (Un)plugging the USB plug on DTQSYS board affects the channel output range.

  #159 opened a year ago by cmanley
  1

• Allow use while in a Car / Plane or other rotating body

  #109 opened 2 years ago by dlktdr
  3

• Re-programming a Receiver as a Transmitter Happymodel EP2

  #146 opened a year ago by ewcook
  9

• Not Working on DX8 g2

  #153 opened a year ago by Thomas-GT40
  8

• Re-center using bluetooth

  #151 opened a year ago by haplm
  2

• Release 2.2 - Release Checklist

  #133 opened a year ago by dlktdr
  5

• Re-Work the Calibration Wizard

  #122 opened a year ago by dlktdr
  0

• Add new Gyro Calibration Routine

  #130 opened 2 years ago by dlktdr
  1

• Multiple boards and flashing updates

  #144 opened 2 years ago by dlktdr
  0

• Move calibration calculations to the firmware

  #136 opened 2 years ago by dlktdr
  0

• Use adafruit uf2 bootloader for nrf52 board?

  #142 opened 2 years ago by kien242
  1

• Firmware loader usability improvement

  #108 opened 2 years ago by kobelev-tech
  1

• Increase/Decrease Min/Max Limits in GUI

  #135 opened 2 years ago by dlktdr
  1

• Allow for additional AUX channels to be used

  #138 opened 2 years ago by bryceartstew
  2

• WebApp Changing Gain Crashes FW

  #128 opened 2 years ago by dlktdr
  2

• IMU Axis Conventions

  #123 opened 2 years ago by dlktdr
  7

• GUI: Allow scroll zoom and dragging on pinout viewer & support for new boards

  #131 opened 2 years ago by dlktdr
  0

• Channel IO rework to Multiplexer

  #132 opened 2 years ago by dlktdr
  0

• Multiple pop messages, only one is shown

  #113 opened 2 years ago by dlktdr
  0

• CRSF / ELRS Output - Set the Power Level and Rates

  #129 opened 2 years ago by dlktdr
  0

• WebApp Live Channel View

  #126 opened 2 years ago by bryceartstew
  2

• Cannot Get SBUS or PPM to work with TX16S internal port

  #118 opened 2 years ago by skunkwurk
  32

• GUI App: Enabled and disabled buttons on the main screen have very little visual difference

  #115 opened 2 years ago by kobelev-tech
  2

• Centering button

  #116 opened 2 years ago by AndersN76
  4

• GUI Tab Order Incorrect

  #106 opened 2 years ago by dlktdr
  0

• Better more clear content on the IMU output - Local Board

  #111 opened 2 years ago by kobelev-tech
  1

• Data model of the GUI application

  #107 opened 2 years ago by kobelev-tech
  1