Dwinnn's Example Home Assistant Configuration Files

Here is a set of configuration files that represents my current Home Assistant instance. If you have seen my video demonstration on Youtube, I will explain how I achieved the current look of the UI, including the Lovelace cards, custom components, and Hass.io addons I used. Feel free to send any questions to dwinnnspeaks@gmail.com or visit my home automation website @ dwinnn.com.

NOTE: To use this UI properly, you will need to enable the Lovelace YAML mode in your configuration.yaml and create the ui-lovelace.yaml file. See instructions on the Home Assistant site. It is a lot more work (and pain), but you can customize it to your liking.

SECOND NOTE: This configuration was created in February 2019 with Home Assistant 0.84.5 and old versions of custom Lovelace cards. There have been many breaking changes to Home Assistant components and cards since then and this configuration example may not work properly with the latest version of Home Assistant without a few configuration changes. It is still a good learning resource though.

Home Assistant Hardware/Software Overview

Home Assistant 0.84.5
Raspberry Pi 3B+ using Hass.io, HassOS 1.13
Sandisk High Endurance 32GB micro SD card
APC Back-UPS 125 VA 75 Watts 3 Outlets UPS, BGE90M-CA
Samsung Smartthings v2 Hub

Home Assistant Custom Components

Custom Lovelace Cards

Custom Hass.io Addons I Use

Credits

People (ccostan, skalavala) who shared their Home Assistant configurations, which I borrowed heavily from.
Visit my website dwinnn.com about home automation to keep in touch with my latest updates.