doudar/SmartSpin2k

Issues

• [BUG] CSC sensor cadence reading incorrect

  #545 opened 2 months ago by jekkos
  11

• [BUG] Bowflex IC bike SE stops working with latest release.

  #605 opened a month ago by liuwh08
  9

• [BUG] After Calibration, Gear indicator should reset to 0

  #609 opened a month ago by doudar
  0

• [FR] Always send resistance over FTMS Indoor Bike

  #573 opened 4 months ago by doudar
  2

• Engine is disabled in certain occasions with version 24.11.10

  #594 opened a month ago by serbasan
  8

• [FR] Add ability to change device SSID wifi settings

  #597 opened 2 months ago by xpenno255
  0

• [BUG] Disconnects with Tempo PM

  #550 opened 8 months ago by eMadman
  1

• [BUG] Shifter stopped working after Qdomyos

  #561 opened 5 months ago by Dekto
  26

• [BUG] Inconsistent Settings between Web and App

  #580 opened 2 months ago by doudar
  1

• [FR] Move SSL keys from being hard coded to stored in littlefs

  #570 opened 5 months ago by eMadman
  0

• Erratic ERG in Trainer Day

  #547 opened 5 months ago by aopenshaw
  20

• [BUG] Unable to mount LittleFS after flashing firmware on new PCB, mounts fine after re-flashing with mobile app instead.

  #559 opened 5 months ago by jrbarrick
  3

• Loss of power in sprints. (Keiser M3)

  #510 opened a year ago by serbasan
  15

• [BUG] WiFi doesn't connect if there is a space in the SSID

  #412 opened 2 years ago by doudar
  1

• [FR] Add batterylevel for PM and HR

  #443 opened 2 years ago by Flo100
  9

• [FR] Building upon ERG mode to enable heart rate zone training

  #471 opened a year ago by Sarmyt
  1

• [FR] Bowflex IC SE Bike support

  #514 opened 10 months ago by Codelica
  14

• [BUG] Bluetooth Connection

  #538 opened 10 months ago by Bofunga79
  23

• [BUG] Failing Update OTA Repository action

  #533 opened 10 months ago by donferi
  1

• wifi password SmartSpin2kFirmware-24.2.27.bin

  #536 opened 10 months ago by Bofunga79
  1

• [BUG] Uncontrollable Upward Shifting

  #523 opened a year ago by cjwhitedev
  15

• Not working with TrainerDay

  #515 opened a year ago by docholiday1234
  5

• How to get into Smartspin2k settings

  #527 opened a year ago by wassa22
  19

• Resistance Increases Indefinitely[BUG] (short description)

  #504 opened a year ago by RyzinEnagy
  18

• [FR] In the Settings page, make 'Reset to Defaults' only reset the values, and add a 'Factory Reset' to support current functionality

  #512 opened a year ago by JulienCote
  1

• [FR] Add option to disable the blinking blue LED on the device

  #513 opened a year ago by JulienCote
  0

• PCB v2 capacitor values do not match.

  #508 opened a year ago by serbasan
  1

• Shifters in Stand-alone ERG mode

  #390 opened a year ago by Flo100
  25

• IC4 Sometimes sends a blank device name.

  #500 opened a year ago by doudar
  0

• [BUG] shifter increasing indefinitely (HRM->watts)

  #431 opened 2 years ago by ikishk
  19

• [BUG] Power Table Limits still active with QZ

  #457 opened 2 years ago by doudar
  0

• [FR] Idle sleep mode

  #331 opened 2 years ago by eMadman
  15

• [BUG] Filesystem gets updated when AutoUpdate is set to false

  #426 opened 2 years ago by Flo100
  3

• [BUG] Holding shifters on boot only erases settings

  #435 opened 2 years ago by doudar
  1

• BLE HID Shifting

  #454 opened 2 years ago by doudar
  3

• [BUG] HW broken? Over temp error and lost bluetooth

  #438 opened 2 years ago by xpectnil
  16

• [FR] (Multiple user-support HR->PWR)

  #333 opened 3 years ago by Nico1320
  1

• [FR] Wahoo Dircon output.

  #340 opened 3 years ago by doudar
  6

• [FR] (Addition for Separate Cadence Sensor. Sw would support Power / Speed Trainer, Cadence Crank Arm Sensor and Heart Rate Sensor Connections)

  #430 opened 2 years ago by iandhawes
  0

• [BUG] Setting BT source to "none" is resetting to Any

  #413 opened 2 years ago by eMadman
  7

• Perhaps have SmartSpin2k Poll To Reconnect To Devices When They Are Back On Again

  #404 opened 2 years ago by mashaalmemon
  6

• [FR] Direct mount for Bowflex C7

  #389 opened 2 years ago by eMadman
  2

• [BUG] incline adjustments stop working after a while in sim mode

  #384 opened 2 years ago by eMadman
  3

• [BUG] Stepper motor stops turning after a period of time

  #371 opened 2 years ago by eMadman
  11

• Strange behavior (debug messages "no data in powertable" and "temperature now under control")

  #317 opened 2 years ago by holger8080
  11

• [BUG] Disconnects in TrainerRoad

  #339 opened 2 years ago by eMadman
  2

• [BUG] Driver Overtemp not logged (only reset)

  #318 opened 3 years ago by doudar
  2

• [BUG] Debugging not working in iOS

  #327 opened 3 years ago by doudar
  8

• [BUG] Certificate error when checking for new firmware

  #335 opened 3 years ago by eMadman
  6

• [BUG] Doesn't automatically reconnect device after disconnect

  #320 opened 3 years ago by doudar
  30