edison-fw/meta-intel-edison
Here is the meta-intel-edison that builds, tries to stay up to date. Master is based on Yocto Poky Gatesgarth LTS 5.10.yy vanilla kernels. It builds a 32bit kernel (Gatesgarth branch 64bit) with ACPI enabled and corresponding rootfs. Telegram group: https://t.me/IntelEdison Web-site:
BitBakeMIT
Issues
- 1
- 0
[Kirstone] List of required packages does not match YP
#157 opened by htot - 3
npm i mraa fails
#158 opened by jessewriter - 3
Expired gpg keys
#152 opened by raspberry-spy - 2
- 1
Issue Building Sumo Branch
#149 opened by ColeMurray - 6
failure to build SDK for macosx
#85 opened by xlla - 9
Can't use "configure_edison --setup"
#138 opened by mymistake - 4
- 18
Arduino Create
#98 opened by mwallnoefer - 3
Intel Edison can't boot new flashed image
#139 opened by macvenez - 9
SD card not detected properly in U-Boot
#136 opened by humanoid2050 - 69
SD card does not work on dunfell branch
#135 opened by humanoid2050 - 5
How to use PWM mode?
#130 opened by shawnhsoia97 - 4
how to use PWM in warrior branch.
#100 opened by xlla - 7
- 4
`make debian` broken on master and dunfell
#134 opened by humanoid2050 - 4
requirement for sudo to use flashall.sh
#132 opened by humanoid2050 - 4
Preempt-RT support
#127 opened by mwallnoefer - 3
- 12
exception after long time running
#94 opened by xlla - 5
btrfs support issue
#122 opened by sideralis - 12
boot failure
#125 opened by humanoid2050 - 17
add vim
#101 opened by mwallnoefer - 8
ACPI table is not loaded
#128 opened by shawnhsoia97 - 1
Integration with Azure
#129 opened by andy-shev - 20
mraa crash on Yocto dunfell
#123 opened by mwallnoefer - 15
blink-led.service on zeus (and later)
#97 opened by mwallnoefer - 2
BTRFS rebooted crash
#124 opened by shawnhsoia97 - 3
can we support I2S
#93 opened by xlla - 4
- 4
How to change IFWI of Edison?
#118 opened by shawnhsoia97 - 16
- 76
Debian install linux-headers version problem
#114 opened by shawnhsoia97 - 24
sof-audio-pci - failed to probe DSP hardware
#105 opened by xlla - 38
ADC: only A0 work.
#108 opened by xlla - 1
mraa iio init wants "events"
#110 opened by xlla - 1
tri_state_all line always show 0 with gpioget
#109 opened by xlla - 10
- 2
how to set vref for ADC chip
#104 opened by xlla - 2
should rename ttyMFD2 to ttyGS2?
#103 opened by xlla - 1
UART on arduino board does not work in acpi version.
#107 opened by xlla - 4
How to add or modify menuconfig?
#102 opened by shawnhsoia97 - 24
MRAA usage issues
#95 opened by shawnhsoia97 - 34
sketch_reset.service
#91 opened by mwallnoefer - 4
configure_edison
#81 opened by mwallnoefer - 5
/boot -> No such device
#88 opened by mwallnoefer - 11
Machine id service
#87 opened by mwallnoefer - 8
missing /home after change partitions size
#86 opened by xlla - 6
Not installing file to /home
#84 opened by shawnhsoia97