[> Getting started ------------------ 1. Install LiteX: https://github.com/enjoy-digital/litex/wiki/Installation 2. Run the simulation: ./sim.py --cpu-count=1 add --sdram-init to load the images add --trace to enable waveform that will be located in build/sim/gateware/sim.vcd 3. Test on Hardware (Arty A7 or Nexys Video): ./target.py --cpu-count=1 --with-ethernet --with-sdcard --build --load Copy the contents of images directory to a Fat SDCard and insert it in the board's slot. Run lxterm: lxterm /dev/ttyUSBX For development, it's also possible to load the images from the UART: add --uart-baudrate=3e6 to the target's arguments. run lxterm with: lxterm /dev/ttyUSBX --speed=3e6 --images=images.json --no-crc