Bitfiltrator is an automated bitstream parameter extraction tool for Xilinx UltraScale and UltraScale+ FPGAs.
Bitstream parameters are a series of device- and architecture-specific constants that are needed to locate the position of certain configuration bits in a bitstream. These parameters are the basis for implementing bitstream manipulation tools or open-source FPGA toolchains for modern US/US+ devices.
All extracted parameters are stored in human/machine-readable files. Pre-generated versions of these files are available in the resources directory.
The demo.py file contains a short program that prints out the SLR name, frame addresses, and frame offsets of any LUT, Flip-Flop, and 18K BRAM given as argument. The demo also prints out the byte offset of each FPGA configuration frame from the start of the bitstream (header included).
╰─❯ python3 demo.py -h
usage: demo.py [-h] [--luts [LUTS ...]] [--ffs [FFS ...]] [--brams [BRAMS ...]] bitstream
Demo application that locates a resource and prints its SLR name, frame addresses, and frame offsets.
positional arguments:
bitstream Input bitstream (with header). Must be a full bitstream, not a partial one.
options:
-h, --help show this help message and exit
--luts [LUTS ...] Name of LUTs to locate in the form of SLICE_X(\d+)Y(\d+)/[A-H]6LUT
--ffs [FFS ...] Name of Flip-Flops to locate in the form of SLICE_X(\d+)Y(\d+)/[A-H]FF2?
--brams [BRAMS ...] Name of 18K BRAMs to locate in the form of RAMB18_X(\d+)Y(\d+)
╰─❯ python3 demo.py <xcu200.bit> --luts SLICE_X0Y13/B6LUT --ffs SLICE_X0Y13/GFF2 --brams RAMB18_X2Y12
SLICE_X0Y13/B6LUT
INIT[ 0] -> SLR0, frame address: 0x00000307 (BLOCK_TYPE = CLB_IO_CLK, ROW_ADDR = 0, COL_ADDR = 3, MINOR_ADDR = 7), frame offset: 639, frame byte offset in bitstream: 26754897
INIT[ 1] -> SLR0, frame address: 0x00000306 (BLOCK_TYPE = CLB_IO_CLK, ROW_ADDR = 0, COL_ADDR = 3, MINOR_ADDR = 6), frame offset: 639, frame byte offset in bitstream: 26754525
INIT[ 2] -> SLR0, frame address: 0x00000305 (BLOCK_TYPE = CLB_IO_CLK, ROW_ADDR = 0, COL_ADDR = 3, MINOR_ADDR = 5), frame offset: 639, frame byte offset in bitstream: 26754153
INIT[ 3] -> SLR0, frame address: 0x00000304 (BLOCK_TYPE = CLB_IO_CLK, ROW_ADDR = 0, COL_ADDR = 3, MINOR_ADDR = 4), frame offset: 639, frame byte offset in bitstream: 26753781
...
INIT[62] -> SLR0, frame address: 0x00000305 (BLOCK_TYPE = CLB_IO_CLK, ROW_ADDR = 0, COL_ADDR = 3, MINOR_ADDR = 5), frame offset: 624, frame byte offset in bitstream: 26754153
INIT[63] -> SLR0, frame address: 0x00000304 (BLOCK_TYPE = CLB_IO_CLK, ROW_ADDR = 0, COL_ADDR = 3, MINOR_ADDR = 4), frame offset: 624, frame byte offset in bitstream: 26753781
SLICE_X0Y13/GFF2
INIT -> SLR0, frame address: 0x0000030c (BLOCK_TYPE = CLB_IO_CLK, ROW_ADDR = 0, COL_ADDR = 3, MINOR_ADDR = 12), frame offset: 668, frame byte offset in bitstream: 26756757
RAMB18_X2Y12
INIT[ 0] -> SLR0, frame address: 0x01000200 (BLOCK_TYPE = BRAM_CONTENT, ROW_ADDR = 0, COL_ADDR = 2, MINOR_ADDR = 0), frame offset: 1536, frame byte offset in bitstream: 47909421
INIT[ 1] -> SLR0, frame address: 0x01000200 (BLOCK_TYPE = BRAM_CONTENT, ROW_ADDR = 0, COL_ADDR = 2, MINOR_ADDR = 0), frame offset: 1548, frame byte offset in bitstream: 47909421
INIT[ 2] -> SLR0, frame address: 0x01000200 (BLOCK_TYPE = BRAM_CONTENT, ROW_ADDR = 0, COL_ADDR = 2, MINOR_ADDR = 0), frame offset: 1560, frame byte offset in bitstream: 47909421
INIT[ 3] -> SLR0, frame address: 0x01000200 (BLOCK_TYPE = BRAM_CONTENT, ROW_ADDR = 0, COL_ADDR = 2, MINOR_ADDR = 0), frame offset: 1572, frame byte offset in bitstream: 47909421
...
INIT[16382] -> SLR0, frame address: 0x010002ff (BLOCK_TYPE = BRAM_CONTENT, ROW_ADDR = 0, COL_ADDR = 2, MINOR_ADDR = 255), frame offset: 1631, frame byte offset in bitstream: 48004281
INIT[16383] -> SLR0, frame address: 0x010002ff (BLOCK_TYPE = BRAM_CONTENT, ROW_ADDR = 0, COL_ADDR = 2, MINOR_ADDR = 255), frame offset: 1643, frame byte offset in bitstream: 48004281
INIT_P[ 0] -> SLR0, frame address: 0x01000200 (BLOCK_TYPE = BRAM_CONTENT, ROW_ADDR = 0, COL_ADDR = 2, MINOR_ADDR = 0), frame offset: 1584, frame byte offset in bitstream: 47909421
INIT_P[ 1] -> SLR0, frame address: 0x01000200 (BLOCK_TYPE = BRAM_CONTENT, ROW_ADDR = 0, COL_ADDR = 2, MINOR_ADDR = 0), frame offset: 1590, frame byte offset in bitstream: 47909421
INIT_P[ 2] -> SLR0, frame address: 0x01000200 (BLOCK_TYPE = BRAM_CONTENT, ROW_ADDR = 0, COL_ADDR = 2, MINOR_ADDR = 0), frame offset: 1587, frame byte offset in bitstream: 47909421
INIT_P[ 3] -> SLR0, frame address: 0x01000200 (BLOCK_TYPE = BRAM_CONTENT, ROW_ADDR = 0, COL_ADDR = 2, MINOR_ADDR = 0), frame offset: 1593, frame byte offset in bitstream: 47909421
...
INIT_P[ 2046] -> SLR0, frame address: 0x010002ff (BLOCK_TYPE = BRAM_CONTENT, ROW_ADDR = 0, COL_ADDR = 2, MINOR_ADDR = 255), frame offset: 1589, frame byte offset in bitstream: 48004281
INIT_P[ 2047] -> SLR0, frame address: 0x010002ff (BLOCK_TYPE = BRAM_CONTENT, ROW_ADDR = 0, COL_ADDR = 2, MINOR_ADDR = 255), frame offset: 1595, frame byte offset in bitstream: 48004281Bitfiltrator is implemented entirely in Python (3.10) and Tcl. The easiest way to use Bitfiltrator is to set up its dependencies using a virtual environment. The instructions below use conda as the virtual environment management system, but you can easily perform a similar setup with other environment managers (venv, etc.) if you prefer.
Bitfiltrator was developed and tested on Ubuntu 20.04 and Vivado 2021.1 / 2022.1. It should run without issues on any machine that has Vivado and Python installed (using conda below).
# Download and install conda
wget https://repo.anaconda.com/miniconda/Miniconda3-latest-Linux-x86_64.sh -O ~/Downloads/Miniconda3-latest-Linux-x86_64.sh
cd ~/Downloads
./Miniconda3-latest-Linux-x86_64.sh
# Set up python 3.10 virtual environment called "bitfiltrator" and install dependencies
conda create -n bitfiltrator python=3.10
conda activate bitfiltrator
pip install joblib more_itertools numpy pandasYou must ensure the virtual environment is active and Vivado is available in your PATH before calling Bitfiltrator. This can generally be performed by executing the following commands:
conda activate bitfiltrator
source <xilinx-install-dir>/Vivado/<vivado-version>/settings64.shBitfiltrator reverse-engineers device/architecture parameters by creating carefully-crafted designs, generating bitstreams for them, and analyzing their binary structure. Since bitstreams are generated, Bitfiltrator needs to supply an FPGA part number to Vivado in each experiment. A pre-generated list of part numbers exists in parts_all.json and parts_webpack.json. Bitfiltrator queries these lists internally.
However, these pre-generated lists may contain more devices than your local Vivado install supports. Running Bitfiltrator with these pre-generated lists may therefore cause Vivado to crash if it is asked to generate a bitstream for an unknown part number.
Deleting the pre-generated part files and generating them from your local Vivado installation solves the problem.
╰─❯ rm -f ./resources/parts_all.json
╰─❯ rm -f ./resources/parts_webpack.json
╰─❯ python3 src/generate_fpga_part_files.pyUse create_device_summary.py to extract device parameters for a given FPGA part number.
For example, the following command creates a device summary for the xcu200 FPGA and places it in the default resources/devices directory. A copy of the device summary is also written to the user-requested file (xcu200_summary.json below).
╰─❯ python3 src/create_device_summary.py xcu200-fsgd2104-2-e <working-dir> <xcu200_summary.json>Please consider creating a pull request with your device parameter file if it is not part of the pre-generated list. In particular, we welcome PRs for non-WebPack devices :)
Use create_arch_summary.py to extract architecture parameters for a given FPGA part number.
Note that all US FPGAs have the same architecture summary, and that all US+ FPGAs have the same architecture summary (which is different from US FPGAs). It is therefore recommended to use the smallest FPGA that has the given target architecture when calling this program to reduce the size of bitstreams that are generated and analyzed. This significantly speeds up the processes of extracting architecture parameters.
For example, the following command creates an architecture summary for the xazu2eg-sbva484-1-i FPGA and places it in the default resources/archs directory. A copy of the architecture summary is also written to the user-requested file (usplus_summary.json below).
╰─❯ python3 src/create_arch_summary.py xazu2eg-sbva484-1-i <working-dir> <usplus_summary.json>The run_all.py program creates device and architecture summaries for all WebPack-enabled US/US+ FPGAs available in your local Vivado installation. Note that this requires several GBs of disk space and takes several hours to complete depending on the speed and parallelism of your machine.
╰─❯ rm -f ./resources/parts_all.json
╰─❯ rm -f ./resources/parts_webpack.json
╰─❯ rm -f ./resources/archs/
╰─❯ rm -f ./resources/devices/
╰─❯ python3 src/run_all.py --verify <working-dir>For reference, the end-to-end runtime for reverse-engineering 34 WebPack-enabled US/US+ FPGAs available in Vivado 2021.1 is ~3h on a Xeon E5-2680 v3 CPU (using --process_cnt 24). Disk space use for this process was ~16 GB.
All code in this repository is available under the MIT license. Please refer to the full license for details.
This project was created by Sahand Kashani, Mahyar Emami, and James Larus at EPFL.
A top-down explanation of how Bitfiltrator reverse-engineers the configuration bits of various cells can be found in the following paper and presentation.
Sahand Kashani, Mahyar Emami, and James R. Larus. Bitfiltrator: A general approach for reverse-engineering Xilinx bitstream formats. In Proceedings of the 32nd International Conference on Field‐Programmable Logic and Applications, Belfast, August 2022.
If you'd like to cite this software, please use the following Bibtex entry:
@software{bitfiltrator,
author = {Kashani, Sahand and Emami, Mahyar and R. Larus, James},
license = {MIT},
month = {8},
title = {{Bitfiltrator: A general approach for reverse-engineering Xilinx bitstream formats}},
url = {https://github.com/epfl-vlsc/bitfiltrator},
version = {1.0},
year = {2022}
}