esphome/bluetooth-proxies

Issues

• Trying to add DHT sensor to same ESP32 running a bluetooth proxy

  #84 opened 10 months ago by tejasitraj
  1

• With latest update GL.iNet GL-S10 still does not work in HA?

  #81 opened 10 months ago by JohnyBeGood
  14

• M5 Atom Lite as Bluetooth Proxy

  #83 opened 10 months ago by AseKarlsson
  32

• Wifi connection only with visible SSID

  #89 opened 10 months ago by clfberlin
  2

• GL.iNet GL-S10 - No Ethernet connection with hardware v2.1?

  #60 opened a year ago by JohnyBeGood
  42

• GL-iNet GL-S10 Issues

  #79 opened a year ago by HeFeng1947
  1

• ⚠️ DO NOT POST COMPONENT ISSUES HERE

  #46 opened 2 years ago by nagyrobi
  3

• Too aggressive settings for bluetooth proxies with WiFi + BT support

  #67 opened a year ago by emontnemery
  10

• the new version GL-S10 Ethernet chip is IP101GRI that is not supported by esphome currently

  #21 opened 2 years ago by 645340633
  23

• Error in the web compilation of Monday days

  #75 opened a year ago by Gferretta
  0

• Why doesn't the website upgrade the ESP32 to the latest released version?

  #68 opened a year ago by Gferretta
  6

• What are the step to start from Scratch?

  #73 opened a year ago by yyakauleu
  4

• m5stack-atom-lite

  #72 opened a year ago by KuruKanagalingam
  4

• ble scna does not find any device

  #65 opened a year ago by simonepreite
  1

• Question: BLE + HTTPS coexistence

  #63 opened a year ago by jshep321
  1

• Error attempting to update existing ESPHome bluetooth proxies

  #54 opened 2 years ago by MakerDockio
  12

• Mis-clicked create issue

  #62 opened 2 years ago by crackha
  0

• bluetooth proxies update fail - compiler error?

  #59 opened 2 years ago by crackha
  8

• Web installer not asking for wifi credentials

  #51 opened 2 years ago by joostbijl
  3

• Webpage and firmware for GL.iNet GL-S10 rev2.3 should be separate from GL.iNet GL-S10 rev1.0

  #49 opened 2 years ago by nepozs
  4

• Error attempting to update existing ESPHome bluetooth proxies

  #58 opened 2 years ago by Gferretta
  1

• Update firmware 2022.12

  #57 opened 2 years ago by alexdelli
  1

• The AP mode is not work to config network

  #56 opened 2 years ago by gl-chenxiaosheng
  2

• Implemented: https://esphome.io/components/sensor/xiaomi_ble.html#mjyd02yl-a

  #25 opened 2 years ago by johnjoemorgan
  3

• Config file for different revisions of GL-S10

  #48 opened 2 years ago by Dinth
  5

• Xiaomi Mijia Motion Sensor 2 (RTCGQ02LM)

  #45 opened 2 years ago by Anzic23
  1

• GL-S10 OTA Safe Boot issue

  #44 opened 2 years ago by DJBenson
  2

• GL-S10 OTA issue

  #39 opened 2 years ago by gerard33
  4

• WT32-eth01

  #18 opened 2 years ago by Eponas07
  6

• xiaomi_mjyd02yla not getting any status updates

  #42 opened 2 years ago by ptrsconsulting
  2

• switchbot curtain works only 1 cover

  #38 opened 2 years ago by italoc
  1

• Problems with ESP32 NodeMCU & GL-S10

  #35 opened 2 years ago by TB-SE
  7

• [active] is an invalid option for [bluetooth_proxy]. Please check the indentation.

  #33 opened 2 years ago by ziolelle
  7

• YAML config fails with active: True

  #37 opened 2 years ago by JAAlperin
  1

• Error when adopting from esphome

  #32 opened 2 years ago by patatman
  2

• Request for LilyGO T-Internet-COM support

  #27 opened 2 years ago by unmesh59
  2

• Homekit Support?

  #26 opened 2 years ago by abishur
  3

• lan eth doesn't work

  #19 opened 2 years ago by 645340633
  4

• New ESP32 suggestion: AZ-Delivery DevkitC

  #14 opened 2 years ago by Nardol
  3

• MQTT support

  #15 opened 2 years ago by jperquin
  1

• Flash page does 't work for the Generic ESP32.

  #11 opened 2 years ago by huizebruin
  1

• Error after installing M5 Atom Lite via webpage

  #9 opened 2 years ago by bobvmierlo
  1

• Question - esp32 proxy

  #4 opened 2 years ago by adrianmihalko
  5