/ndt_mapping

Baidu apollo offline mapping tool

Primary LanguageC++Apache License 2.0Apache-2.0

Quick Start

This is Baidu apollo offline mapping tool.

Environment

The environment for creating the map is as follows, you need to be equipped with lidar and GNSS(IMU+GPS).

  • RoboSense RS-LiDAR-32
  • GNSS
  • Apollo 5.0

Collect data

First you need to collect the sensor data needed for mapping. If your vehicle has been installed with Apollo5.0, you can use below command to record the bag.

cyber_recorder record -c imu_topic localization_pose_topic lidar_topic

After collecting the data, you can start making a map by following the steps below.

How to run

Compile the code according to the following steps.

  1. Copy the entire directory ndt_mapping to apollo's modules/localization/msf/local_tool/
  2. Build the localization module in apollo

1.Unzip the bag

Extract the pcd file and pose file from the bag. You can use multiple "--bag_file" to extract multiple bag files. The decompressed file is saved in --out_folder.

./bazel-bin/modules/localization/msf/local_tool/data_extraction/cyber_record_parser --bag_file=data/bag/20210514100819.record.00000 --bag_file=data/bag/20210514100819.record.00001 --out_folder=data --cloud_topic=/apollo/sensor/rs32/PointCloud2

2.Poses interpolation

Interpolate the pose according to the external parameters and timestamp of the lidar. The corrected pose is saved in --output_poses_path.

./bazel-bin/modules/localization/msf/local_tool/map_creation/poses_interpolator --input_poses_path=data/pcd/odometry_loc.txt --ref_timestamps_path=data/pcd/pcd_timestamp.txt --extrinsic_path=modules/localization/msf/params/velodyne_params/velodyne64_novatel_extrinsics_example.yaml --output_poses_path=data/pcd/poses.txt

3.NDT mapping

Use the following command to create a map, the result of the map is default saved in "data/output.pcd"

./bazel-bin/modules/localization/msf/local_tool/ndt_mapping/ndt_mapping

You can also set some parameters in the command line according to your needs

./bazel-bin/modules/localization/msf/local_tool/ndt_mapping/ndt_mapping -output_file=xxx

The parameters list

// filter
-min_scan_range = 25.0  // the square of the min scan range
-max_scan_range = 10000.0  // the square of the max scan range
-min_add_scan_shift = 1.0  // the square of the min add scan length
-voxel_leaf_size = 2.0  // voxel leaf size

// ndt
-trans_eps = 0.01  // transformation epsilon
-step_size = 0.1  // step size
-ndt_res = 1.0    // ndt resolution
-max_iter = 30    // maximum iterations times

// map
-output_file = "data/output.pcd"  // map save file path
-workspace_dir = "data/pcd"       // work dir

Example

The following is the result of the mapping of the underground parking lot. parking_lot