fellesverkstedet/workshop-wiki

Issues

• Script that checks for upper sensor in Z-axis runs sometimes past the sensor

  #11 opened 3 years ago by Siemenc
  2

• Find proper screws for 30-40 mm material and 40-50 mm material

  #22 opened 3 years ago by Siemenc
  0

• Reprint handle for window of Bot2

  #23 opened 3 years ago by Siemenc
  1

• Make new felt pads for shopbot wheels

  #27 opened 3 years ago by Siemenc
  0

• Clean beds of 3D printer

  #28 opened 3 years ago by Siemenc
  0

• Upgrade Vcarve on computer next to 3D printer

  #16 opened 4 years ago by Siemenc
  0

• Move the gate to open the extraction for bot2 closer to the machine

  #26 opened 4 years ago by Siemenc
  0

• Move the whole bed backwards and put zero plate on the front?

  #24 opened 4 years ago by Siemenc
  1

• Move the whole sacrifial layer backwards and put Z-zero plate in front

  #25 opened 4 years ago by Siemenc
  0

• 3D milling needs more instructions on wiki

  #21 opened 4 years ago by Siemenc
  0

• New screw down disks for foam milling

  #20 opened 4 years ago by Siemenc
  0

• Create new drying unit for below exposure unit

  #19 opened 4 years ago by Siemenc
  0

• Create new exposure unit

  #18 opened 4 years ago by Siemenc
  0

• Import dxf issue BOT2 pc

  #5 opened 4 years ago by Siemenc
  0

• Try turning extraction in back of shopbot room into vacuum cleaner as well

  #17 opened 4 years ago by Siemenc
  0

• Create page for how to set up in Vcarve?

  #13 opened 4 years ago by Siemenc
  1

• Z-zero plate 2.0

  #15 opened 4 years ago by Siemenc
  0

• New design dust skirt

  #12 opened 4 years ago by Siemenc
  1

• Set up a routine for when the shopbots & laser get their maintenance.

  #10 opened 4 years ago by Siemenc
  1

• Fix the front part of the dust skirt.

  #1 opened 4 years ago by Siemenc
  2

• Create page/tutorial on how to use the machine?

  #14 opened 4 years ago by Siemenc
  0

• Make warning signs for shopbot to warn about sharp bits

  #8 opened 4 years ago by Siemenc
  1

• Make a step to easier walk onto the Shopbot

  #7 opened 4 years ago by Siemenc
  0

• Make bigger measuring acrylic for checking how long the bit stick out

  #9 opened 4 years ago by Siemenc
  2

• Make checklist for things to check in Vcarve when setting up 2D / 3D job?

  #6 opened 4 years ago by Siemenc
  0

• Make checklist to go over and see if a user qualifies as a "pro" user

  #4 opened 4 years ago by Siemenc
  1

• Make a checklist for cleaning for the users after they're done

  #2 opened 4 years ago by Siemenc
  1

• Make wiki page for vinyl cutter

  #3 opened 4 years ago by Siemenc
  0