Issues
- 2
pigpio : Error -123 gpioSetISRFunc
#155 opened by TMagerat - 6
- 8
Consider relaxing restrictions in binding.gyp
#136 opened by cinderblock - 12
- 11
- 2
Simply not working
#153 opened by migoun - 1
Raspberry Pi 5 Support
#152 opened by RicardoVaranda - 3
- 1
Is SPI slave mode supported?
#149 opened by dtbaker - 2
"pigpio" error Maximum call stack size exceeded
#150 opened by Marco-exports - 2
ask for help
#137 opened by Canees - 12
pigpio.gpioInitialise() in pi 4B
#146 opened by alanezze - 22
Could not locate bindings file
#145 opened by nexuspcs - 1
Issue w/ latest Node & OS
#144 opened by fingerskier - 1
Freeze when using invalid GPIO numbers
#143 opened by lmeysel - 6
High CPU usage on Pi 4B
#142 opened by kobuki - 6
sigHandler: Unhandled signal 2, terminating
#127 opened by kiko0217 - 0
Run stepper motor for a precise number of steps.
#138 opened by gsabran - 7
using pigpio with 4 motors
#141 opened by alimuhnad - 4
how can i read data from gps from pin 15 tx 16 rx ?
#140 opened by alimuhnad - 2
Error: EINVAL, Invalid argument
#139 opened by samwelkinuthia - 7
Maximum PWM channels in use at one time
#121 opened by briancampo - 1
Unable to use package
#135 opened by Zebiano - 4
Error: The module '.../pigpio.node' was compiled against a different Node.js version
#134 opened by Zeprakadebra - 2
Electron & pigpio: gpioInitialise is not a function
#133 opened by SamBThor - 3
PWM and Interrupts
#132 opened by afnan - 2
Can't gpioInitialise on a Pi 400
#131 opened by fisherds - 1
Can't connect to pigpio at localhost(8888) Can't create callback thread. Perhaps too many simultaneous pigpio connections
#130 opened by Madhuraank - 2
- 2
Its possible to determine period of pulses using the tick value from on('alert') - like frecuency calculator
#128 opened by lucianobustos - 4
- 2
Setting output direction
#123 opened by 13 - 1
can I use this to connect to a pi remotely?
#122 opened by johnathanhawn - 7
Proximity Sensor Bad Readings
#119 opened by evandavey - 4
Does pigpio support compute module 3 ?
#118 opened by jinyistudio - 2
Cannot install package on node 8.9.0
#117 opened by bmadzinski - 7
Array support
#116 opened by IanW6374 - 3
- 4
Take too much time to release the GPIO
#113 opened by CorentinDy - 9
Error: Module did not self-register
#112 opened by DoganM95 - 13
- 12
Failed compiling / installing 3.2.0
#109 opened by highstrike - 14
Running on non-pi
#107 opened by vypxl - 5
How to run pigpio with root privilege?
#106 opened by nicolasherrbach - 1
Feature Request: Include types
#103 opened by cinderblock - 2
- 9
motor.servoWrite(0) not working
#102 opened by Janaka-Steph - 3
Can I read an output pin?
#100 opened by BobSegrest - 6
HC-SR04 not functioning as expected
#99 opened by proateen - 2
Update to v74 c-library
#98 opened by patonz