fl4p/batmon-ha

Issues

• JBD times out constantly after a few minutes of successful sampling

  #203 opened 9 months ago by coconup
  6

• OverflowError: (34, 'Numerical result out of range')

  #259 opened 2 months ago by ThomasCr
  0

• TDT-6056 add BMS

  #223 opened 7 months ago by janicek7
  2

• normal connect failed

  #258 opened 2 months ago by gopalreddylakki
  0

• Unknown BMS BM100 values ​​going up and down in one volt increments

  #248 opened 3 months ago by Ordiproxi
  5

• Is addon still maintained?

  #256 opened 3 months ago by 7wells
  6

• Password for JBD BMS

  #217 opened 8 months ago by AstroR44
  3

• DALY BMS problem - TimeoutError: timeout awaiting result 93, got 0/1 responses

  #205 opened 9 months ago by WolwX
  2

• Trouble finding any BMS through ESPHome Bluetooth Proxy (SMLIGHT SLZB-06M) for remote location

  #220 opened 7 months ago by Off-Grid-Garage
  9

• Victron shunt

  #255 opened 3 months ago by Homekit-Josh
  0

• Vestwood battery support

  #254 opened 3 months ago by jandej
  0

• Supervolt BMS | Error | Characteristic 6e400003-b5a3-f393-e0a9-e50e24dcca9e not found! | unsupported operand type(s) for &: 'NoneType' and 'int'

  #226 opened 7 months ago by nightcat91
  12

• Cannot find batmon in the available integration list after setting it up

  #252 opened 3 months ago by phildarwin
  0

• How do i run this via a container with Home Assistant running in a container

  #251 opened 3 months ago by ashipaek0
  0

• No entities or how to make a card in HA

  #250 opened 3 months ago by Pleeriezer
  0

• Missing temps

  #207 opened 9 months ago by esther1112
  4

• Error loggin

  #247 opened 4 months ago by Didierp31
  1

• JK inverter BMS: connection losses after 1 week + depreciation warning + other issues in the log (like "Unable to open mgmt_socket")

  #238 opened 4 months ago by typxxi
  4

• JK BMS stop reporting Voltage, Amperes, Soc, etc. Report most of the remain values without problems.

  #235 opened 5 months ago by Delphinus44
  5

• JK_B1A20S15P cannot read or publish data?

  #227 opened 7 months ago by ligius-
  4

• Unable to find or connect to Daly BMSs

  #246 opened 4 months ago by Robifz
  0

• Offline usage

  #244 opened 4 months ago by slundell
  2

• Error discovering devices

  #240 opened 4 months ago by kmoreau893
  0

• DALY BMS checksum errors

  #206 opened 9 months ago by danbi
  4

• Connect to Daly BMS via TTL/UART

  #225 opened 4 months ago by sanitariu
  3

• TDT 6022 or XDZN 6022

  #231 opened 6 months ago by dajpereira
  0

• Jk bms beep buzzer

  #236 opened 4 months ago by geozar
  1

• Daly Smart Active Balancer (not bms)

  #239 opened 4 months ago by Qweua
  0

• Batmon intermittently working

  #237 opened 4 months ago by jcottis
  1

• Installation error

  #233 opened 5 months ago by candidotsa
  5

• Algorithms not working for Jikong BMS

  #234 opened 5 months ago by alexeyklots
  0

• Missing data from one of the JK BMS i'm using like SOC en Current

  #209 opened 8 months ago by EricGrosfeld
  22

• Enable statistics for JBD entities

  #232 opened 6 months ago by LarryPost1
  0

• BMS Parameter

  #228 opened 6 months ago by k2dp2k
  4

• Wrong values showed in relation to two Creabest VB024 batteries

  #229 opened 6 months ago by Alex-DeIt
  2

• Missing SOC and Temp info. Voltages are fine

  #182 opened a year ago by aletmp
  19

• SOK-AA14796 error (#2): <class 'TimeoutError'>

  #222 opened 7 months ago by goldriver2
  0

• Add-on breaks quite often.

  #219 opened 7 months ago by LifeofDan-EL
  1

• Error in log Unable to open mgnt_socket

  #211 opened 8 months ago by Karatzie
  1

• Daly BMS don't Work

  #210 opened 8 months ago by AndyHAssistant
  0

• BMS JBD

  #198 opened 9 months ago by rintintin17
  5

• TypeError: Client.__init__() missing 1 required positional argument: 'callback_api_version'

  #197 opened 9 months ago by asd343
  15

• Victron SmartShunt (total_energy_charge / total_energy_discharge) accuracy

  #191 opened 9 months ago by RoySalisbury
  2

• mqtt publish failed

  #193 opened 9 months ago by rajcooool
  1

• paho-mqtt issue

  #195 opened 9 months ago by peteretep
  7

• BMS JK-B2A20S20P connecting issue

  #189 opened 10 months ago by kzajac83
  3

• The command '/bin/ash -o pipefail -c apk add python3' returned a non-zero code: 1

  #184 opened 10 months ago by Serebrin
  2

• Missing Error codes

  #186 opened 10 months ago by stanfordcg
  1

• Esp32 Bluetooth proxy

  #187 opened 10 months ago by dowermyr
  1

• Balance Switch not available in JK BMS

  #181 opened 10 months ago by arzaman
  6