victron
There are 118 repositories under victron topic.
hoylabs/OpenDTU-OnBattery
Software for ESP32 to talk to Hoymiles/TSUN/Solenso Inverters, VE.Direct devices, battery management systems, and related peripherals
fl4p/batmon-ha
Add-on for Home Assistant to connect JK, JBD, Daly, ANT, SOK and Supervolt BMS via Bluetooth
KinDR007/VictronMPPT-ESPHOME
Victron Mppt charger ve.direct to esphome node
bareboat-necessities/lysmarine_gen
With BBN OS you can build a central boat computer. BBN OS is free and open source. It is based on commonly used community supported open source projects such as SignalK, PyPilot, OpenCPN, and others. BBN OS graphical user interface will let you build a cockpit front-end to all functionality of the OS from chartplotting, dashboards, weather, etc.
Fabian-Schmidt/esphome-victron_ble
Use official Victron BLE endpoint for fetching data from Victron devices via Bluetooth LE via ESPHome.
sfstar/hass-victron
Integration for Home Assistant to fetch data from the victron gx device via modbusTCP
bareboat-necessities/my-bareboat
Opensource hardware and software solutions for sailing and sailboats
reserve85/HoymilesZeroExport
Zero Export Script for Hoymiles Inverters using AhoyDTU / OpenDTU and Tasmota Smart Meter inferface / Shelly 3EM / SHRDZM / Emlog / ioBroker
fabian-lauer/dbus-shelly-3em-smartmeter
Integrate Shelly 3EM smart meter into Victron Energies Venus OS
ai-republic/bms-to-inverter
Use, monitor and control any battery brand with any inverter! Application to read and monitor data from BMSes and write data to an inverter using any protocol (e.g. UART, RS485, ModBus or CAN)
henne49/dbus-opendtu
Integrate opendtu and ahoy into Victron Energies Venus OS as a pv inverter
birdie1/victron
Victron bluetooth and serial communication at a python script. With MQTT and HomeAssistant support.
physee/Victron.Arduino-ESP8266
Code to read the VE.Direct-Protocol from serial into a value array. Uses a non-blocking read loop and does checksum verification before adding the data.
mr-manuel/venus-os_dbus-serialbattery
Battery Monitor driver for serial battery in VenusOS GX systems
keshavdv/victron-hacs
Home Assistant plug-in for Victron Instant Readout compatible devices
mr-manuel/venus-os_dbus-mqtt-grid
This Venus OS driver gets the data from MQTT and displays it as grid, genset or ac load meter.
KinDR007/VictronSmartShunt-ESPHOME
SmartShunt ve.direct to ESPHOME node
Hywan/LaMaisonVivante
Home Automation programs for my self-sufficient house
mr-manuel/venus-os_dbus-mqtt-pv
This Venus OS driver gets the data from MQTT and displays it as pv inverter.
remcom/hass-victron
Integration for Home Assistant to fetch data from the victron gx device via modbusTCP
softwarecrash/Victron2MQTT
Little Program for ESP82XX to get the Victron data to web and MQTT
butterwecksolutions/Spotmarket-Switcher
Shell script that manages Victron Venus OS ESS-Systems and/or Shelly Plug S and/or AVM Fritz!DECT200 and 210 switchable sockets so that it charges/switches, when spot-market prices are low.
mr-manuel/venus-os_dbus-mqtt-battery
This Venus OS driver gets the data from MQTT and displays it as battery.
Pekaway/VAN_PI
MAIN REPO VAN PI - the Raspberry based DIY AIO Camper Unit
diebietse/invertergui
A simple Go based monitoring tool for Victron Multiplus devices
mr-manuel/raspberry-pi-backup
This script allows you to backup your Raspberry Pi to a SMB/CIFS share on a NAS/computer without removing the SD card.
Telekatz/venus.dbus-hoymiles
Integrate Hoymiles microinverter into Victron Energies Venus OS
optio50/Victron_Modbus_TCP
Victron Modbus & MQTT Example
E-t0m/zeroinput
Set power input to zero for soyosource gti inverters and MPPT charge controllers.
jessedc/ve.direct-python
VE.Direct to InfluxDB for Raspberry Pi
Bastelschlumpf/SolarSystemOffGrid
Emergency solar system with grid switching in case of insufficient solar energy.
roblatour/ESP32RemoteForVictron
an Arduino sketch to remotely monitor and control a Victron Multiplus II system
martiby/multiplus2
Direct control of a Victron Multiplus II
mr-manuel/venus-os_dbus-mqtt-solar-charger
This Venus OS driver gets the data from MQTT and displays it as solar charger.
Telekatz/venus.dbus-shellyPlug
Integrate Shelly single phase energy meters into Victron Energies Venus OS