reserve85/HoymilesZeroExport

Issues

• Feature Request - MQTT Auto-Discovery

  #250 opened 2 months ago by Bend3smo
  7

• Bitte um Hilfe für Update und MQTT-Einrichtung

  #202 opened 6 months ago by crisi-solar
  28

• How to run script for newbies ?

  #251 opened a month ago by toutou311
  0

• WR (HM1200) startet auch bei Unterspannung

  #247 opened 2 months ago by robson1311
  19

• Max und Min Einspeisung Jump

  #248 opened 2 months ago by filou01
  1

• Drosselung bzw. Erhöhung greift zu stark

  #228 opened 3 months ago by RealNBB
  45

• Feature Request - Tibber Price Level

  #246 opened 2 months ago by Crackerliii
  0

• Nulleinspeisung mit Akkus

  #245 opened 2 months ago by NewSmokie
  6

• Problem HoymilesZeroExport mit openDTU - hängt in der Früh

  #211 opened 5 months ago by crisi-solar
  27

• 800 Watt max für 3 Wechselrichter einstellen

  #243 opened 2 months ago by fatzo
  2

• OpenDTU Inverter in der Früh offline - Command Queue voll

  #242 opened 2 months ago by martin-st-81
  17

• Hilfe mit HOY_BATTERY_MODE

  #226 opened 2 months ago by sibelle-labs
  4

• Frage zu Victron Multiplus II + HoymilesZeroExport

  #222 opened 4 months ago by crisi-solar
  13

• 3ter Inverter ignoriert SET_LIMIT_TIMEOUT_SECONDS = 3

  #241 opened 2 months ago by martin-st-81
  15

• Wie meinst du das, dass das eigentlich "bei Ahoy geöffnet werden müsste"? :)

  #240 opened 3 months ago by RealNBB
  1

• Frage zu Inverter ausschalten/standby

  #224 opened 4 months ago by tester277
  2

• nach Debian Update keine stabile Verbindung zu Ahoy

  #239 opened 3 months ago by tester277
  2

• Can some please change README.md to make supported hardware more obvious?

  #237 opened 3 months ago by bootix
  1

• Einspeisung nach reglung im Monat

  #209 opened 5 months ago by fatzo
  15

• Nach update auf Version V1.100 kommt "'newLimitSetpoint' is not defined"

  #235 opened 3 months ago by XpertXXL
  3

• Frage zur Berücksichtigung von Wallboxes

  #232 opened 3 months ago by trombose009
  11

• Frage zu MAX_DIFFERENCE_BETWEEN_LIMIT_AND_OUTPUTPOWER

  #233 opened 3 months ago by Ollipop030
  4

• CrossCheckLimit bei Maximum fehlt.

  #231 opened 3 months ago by BlackcatSandy
  6

• Power Peak detection für Kühlschränke und Kurzzeitschwankungen

  #225 opened 3 months ago by BlackcatSandy
  19

• POWERMETER_TARGET_POINT dynamisch anpassen

  #206 opened 6 months ago by echo1483
  8

• Inbetriebnahme unter Docker

  #227 opened 3 months ago by trombose009
  6

• Feature Request "Waschmaschinen-Modus"

  #219 opened 5 months ago by Ollipop030
  5

• Manually changing power output limit script doesn't override it.

  #223 opened 3 months ago by rradkov
  3

• den sricpt auf einem Windows11 Pc instalieren

  #221 opened 5 months ago by fatzo
  0

• Trucki2meanwellgateway T2MG direkt im Script einbinden?

  #220 opened 5 months ago by tclv2000
  2

• Nach Update kein autom. Ein bei steigender Akkuspannung

  #205 opened 5 months ago by robson1311
  7

• MQTT only

  #212 opened 5 months ago by mockbot
  2

• .

  #217 opened 5 months ago by Sebastian7902
  0

• Problem to start the script

  #215 opened 5 months ago by Sebastian7902
  3

• [Question] - How to setup up the script in a docker container?

  #214 opened 5 months ago by Falerion-git
  1

• Docker Image ab v1.94 fehlt

  #213 opened 5 months ago by sveba
  2

• Maybe a great script extension?

  #194 opened 7 months ago by MavenCH
  10

• nullanpassung beschleunigen

  #208 opened 5 months ago by kthemall
  3

• Leistung aufteilen auf 3 Inverter (einer pro phase)

  #189 opened 5 months ago by kthemall
  6

• Begrennzung Richtung Targetpoint in Abängigkeit zur aktuellen Leistung einzelner WR`s?

  #207 opened 5 months ago by tclv2000
  0

• Configuration setup best practices

  #196 opened 7 months ago by Wind06
  2

• opposite to ON_GRID_USAGE_JUMP_TO_LIMIT_PERCENT

  #200 opened 6 months ago by kthemall
  7

• SELECT_INTERMEDIATE_METER to be a script ?

  #197 opened 6 months ago by Thierry43
  5

• Neue Features (kein Issue!)

  #198 opened 6 months ago by jhedtmann
  0

• Logging

  #195 opened 6 months ago by clajog
  2

• 3 WR Ausregelung pro Phase

  #185 opened 7 months ago by smaicloud
  5

• mqtt not authorised error...

  #193 opened 7 months ago by MavenCH
  1

• Victron GX native support

  #192 opened 7 months ago by Hofyyy
  1

• http request and json answer string

  #184 opened 7 months ago by kthemall
  16

• MQTT Config section

  #187 opened 7 months ago by smaicloud
  3