Issues
- 0
How to release CUDA
#76 opened by wxqhit - 1
- 0
Pulsing field of simple point sources?
#73 opened by ss32 - 1
- 0
Can this library use Riker wavelets? Or can I customize the waveform of the source?
#71 opened by wxqhit - 0
- 4
ERROR: File "setup.py" not found.
#69 opened by mmmmeta - 10
- 3
Simulation of metals (complex refractive index)
#62 opened by hajanssen - 1
fdtd.backend and fdtd.set_backend errors
#65 opened by nabilch88 - 1
Where to obtain Total field Array
#67 opened by akrabawi - 3
is the pytorch backend differentiable?
#45 opened by Ni-Chen - 2
development dependencies not downloading
#64 opened by KyrellosIbrahim - 7
`RuntimeError: Expected all tensors to be on the same device, but found at least two devices, cuda:0 and cpu!`
#55 opened by kerstin921 - 0
- 1
Version on pypi doesn't have commit "don't use bd.float directly for type casting" and is erroring
#60 opened by kyjohnso - 15
ffmpeg not installed?
#54 opened by kerstin921 - 1
Loading Spatial Distributions
#56 opened by kdotom - 0
Polarization for Linear Source
#57 opened by kdotom - 3
Field in position of source
#43 opened by GenB31415 - 16
Frequency dependent permittivity
#31 opened by lupettolab - 0
- 1
How should I implement pattern lighting?
#50 opened by 694856790 - 0
How do I define a custom electromagnetic field profile as source, like the Import Source in the Lumerical FDTD?
#52 opened by 694856790 - 1
Is fdtd suitable for antenna design?
#51 opened by 0xCoto - 2
Polarization of plane source
#49 opened by brandstetter-johannes - 1
Error using Cuda
#48 opened by hajanssen - 2
parallel computation
#47 opened by jjdredd - 1
Unit correction
#46 opened by QizhouW - 1
Can I simulate birefringent material (eg. liquid crystal) with this simulation?
#44 opened by jongyounghong - 0
Regarding the detected value
#42 opened by PAKFA - 3
Float128 not supported on Windows
#39 opened by Julius-Py - 1
- 1
Value of eps0, mu0 in constants.py
#41 opened by AaronParsons - 7
Acoustic simulations?
#17 opened by sofroniewn - 1
GDS loading on roadmap?
#38 opened by zeyueN - 7
- 13
Use 'quantities' library to handle conversions between simulation units and actual units
#34 opened by aizvorski - 2
Flat Plane Source
#24 opened by CharlesDove - 1
Method for calculation of average power
#25 opened by CharlesDove - 6
Defining a 3D Plane Source
#26 opened by CharlesDove - 1
- 4
Defining conductivity tensor raises error
#36 opened by pingpongballz - 2
Colorbar in grid.visualize
#32 opened by GenB31415 - 6
moving source
#30 opened by GenB31415 - 0
- 1
Unit of conductivity
#28 opened by chenyang9526 - 6
General Tasks
#19 opened by iakovts - 1
Overlapping Source inside Object
#22 opened by 0xDBFB7 - 1