Issues
- 0
- 0
Update Silk Screen
#148 opened by CloudyPadmal - 4
Use kibot to generate diffs
#147 opened by CloudyPadmal - 8
Populate ICSP header
#136 opened by bessman - 2
- 1
Voltage measurement incorrect when powered via USB
#143 opened by everthu - 3
SYSTEM / STATUS LED
#138 opened by bessman - 1
RGB LED not working
#134 opened by bessman - 1
Add another I2C bus
#142 opened by bessman - 2
Document new buttons and LEDs
#137 opened by bessman - 0
Crosstalk between different scope channels
#144 opened by everthu - 1
- 0
White LEDs next to battery connector too bright
#135 opened by bessman - 3
Wave Generator: Triangle wave is deformed
#111 opened by marcnause - 1
- 0
Rename GPIO pin to BOOT
#120 opened by CloudyPadmal - 9
PSLab Hardware V2 - new chip
#79 opened by mariobehling - 2
Driver for sigrok
#74 opened by mariobehling - 5
Instructions to setup ESP
#90 opened by cweitat - 1
INTERESTING OPAMPS
#89 opened by raquena - 0
Add support for a small screen or LED component
#106 opened by mariobehling - 1
Investigate the usage of cheaper components
#108 opened by mariobehling - 1
Crosshair in outline layer
#104 opened by kasbah - 0
- 1
Create a pinout for using external power source
#75 opened by cweitat - 0
PSLab V6
#91 opened by CloudyPadmal - 0
- 2
Change USB type to USB C
#105 opened by mariobehling - 1
Digital inputs are mislabeled on bottom
#116 opened by bessman - 0
Wave Generator: Add Square and Sawtooth
#102 opened by mariobehling - 1
- 3
Move ESP to frontside
#107 opened by mariobehling - 1
Add SPI connector
#82 opened by CloudyPadmal - 1
Add project to kitspace.org using kitspace.yaml
#101 opened by mariobehling - 0
Label groups
#86 opened by fcartegnie - 0
Wave generator ouput protection
#87 opened by fcartegnie - 1
Can the system be powered with batteries?
#88 opened by raquena - 7
New instrument; Ammeter
#98 opened by cweitat - 2
New instrument; Power meter
#99 opened by cweitat - 2
Update BOM for tolerance
#80 opened by cweitat - 2
ESP8266 shift in
#85 opened by fcartegnie - 1
- 0
- 1
Rethink usage of Tantalum capacitors
#69 opened by akaeba - 1
SMD compatible rather than Pick & Place machine
#63 opened by cweitat - 1
- 1
Pinhole size for the female headers
#62 opened by cweitat - 1
Pinhole size for microusb
#61 opened by cweitat - 0
Add svg format
#70 opened by CloudyPadmal - 3
two layer version for reduced costs
#68 opened by shakram02