Pinned Repositories
absminitowerkit
ABS mini tower kit 's driver and installation script.
cm4routerboard
Raspberry Pi Computer Module 4 internet extand board firmware and config files
dockerpi
This is a repository for docker pi kit's modules, such as nightlight hat board and 4 channel relay hat board for Raspberry Pi
pico_breadboard_kit
Full Demo Code for Pico Breakboard Kit with 3.5" TFT Cap Touch
picoBDK
For pico breadboard kit 's 2.8 inch touch screen
picokit
Demo code for Raspberry Pi Pico Starter Kit
picokitadv
Raspberry Pi Pico Kit Premium
rpico
Raspberry Pi Pico MicroPython Demo Code
upsplus
UPS Plus is a new generation of UPS power management module. It is an improved version of the original UPS prototype. It has been fixed the bug that UPS could not charge and automatically power off during work time. It can not only perform good battery power management, but also provide stable voltage output and RTC functions. At the same time,it support for FCP, AFC, SFCP fast charge protocol, support BC1.2 charging protocol, support battery terminal current/voltage monitoring and support two-way monitoring of charge and discharge. It can provide programmable PVD function. Power Voltage Detector (PVD) can be used to detect if batteries voltage is below or above configured voltage. Once this function has been enabled, it will monitoring your batteries voltage, and you can control whether or not shut down Raspberry Pi via simple bash script or python script. This function will protect your batteries from damage caused by excessive discharge. It can provide Adjustable data sampling Rate. This function allows you to adjust the data sampling rate so that you can get more detailed battery information and also it will consume some power. The data sampling information can communicate with the upper computer device through the I2C protocol. UPS Plus supports the OTA firmware upgrade function. Once there is a new firmware update, it is very convenient for you to upgrade firmware for UPS Plus. The firmware upgrade can be completed only by connecting to the Internet,and execute a python script. Support battery temperature monitoring and power-down memory function. UPS Plus can be set to automatically start the Raspberry Pi after the external power comes on. The programmable shutdown and forced restart function will provide you with a remote power-off restart management method. That means you don’t need to go Unplug the power cable or press the power button to cut off the power again. You can set the program to disconnect the power supply after a few seconds after the Raspberry Pi is shut down properly. And you can also reconnect the power supply after a forced power failure to achieve a remote power-off and restart operation. Once it was setting up, you don't need to press power button to boot up your device which is very suitable for smart home application scenarios.
upsv3
It is demo code for 52Pi UPS (With RTC & Coulometer) For Raspberry Pi SKU: EP-0118
52 information Technology., LTD's Repositories
geeekpi/upsplus
UPS Plus is a new generation of UPS power management module. It is an improved version of the original UPS prototype. It has been fixed the bug that UPS could not charge and automatically power off during work time. It can not only perform good battery power management, but also provide stable voltage output and RTC functions. At the same time,it support for FCP, AFC, SFCP fast charge protocol, support BC1.2 charging protocol, support battery terminal current/voltage monitoring and support two-way monitoring of charge and discharge. It can provide programmable PVD function. Power Voltage Detector (PVD) can be used to detect if batteries voltage is below or above configured voltage. Once this function has been enabled, it will monitoring your batteries voltage, and you can control whether or not shut down Raspberry Pi via simple bash script or python script. This function will protect your batteries from damage caused by excessive discharge. It can provide Adjustable data sampling Rate. This function allows you to adjust the data sampling rate so that you can get more detailed battery information and also it will consume some power. The data sampling information can communicate with the upper computer device through the I2C protocol. UPS Plus supports the OTA firmware upgrade function. Once there is a new firmware update, it is very convenient for you to upgrade firmware for UPS Plus. The firmware upgrade can be completed only by connecting to the Internet,and execute a python script. Support battery temperature monitoring and power-down memory function. UPS Plus can be set to automatically start the Raspberry Pi after the external power comes on. The programmable shutdown and forced restart function will provide you with a remote power-off restart management method. That means you don’t need to go Unplug the power cable or press the power button to cut off the power again. You can set the program to disconnect the power supply after a few seconds after the Raspberry Pi is shut down properly. And you can also reconnect the power supply after a forced power failure to achieve a remote power-off and restart operation. Once it was setting up, you don't need to press power button to boot up your device which is very suitable for smart home application scenarios.
geeekpi/picokitadv
Raspberry Pi Pico Kit Premium
geeekpi/absminitowerkit
ABS mini tower kit 's driver and installation script.
geeekpi/upsv3
It is demo code for 52Pi UPS (With RTC & Coulometer) For Raspberry Pi SKU: EP-0118
geeekpi/picokit
Demo code for Raspberry Pi Pico Starter Kit
geeekpi/picoBDK
For pico breadboard kit 's 2.8 inch touch screen
geeekpi/pico_breadboard_kit
Full Demo Code for Pico Breakboard Kit with 3.5" TFT Cap Touch
geeekpi/cm4routerboard
Raspberry Pi Computer Module 4 internet extand board firmware and config files
geeekpi/dockerpi
This is a repository for docker pi kit's modules, such as nightlight hat board and 4 channel relay hat board for Raspberry Pi
geeekpi/rpico
Raspberry Pi Pico MicroPython Demo Code
geeekpi/lcd-config
Lcd resolution configure tool and calibration scripts.
geeekpi/RPiFEBP
Raspberry Pi Fan Expansion Board Plus 0.91 OLED Display V1.0
geeekpi/minitowercase
This repository is for mini tower case's OLED 0.96 screen
geeekpi/RPB-HAT
This is Remote power button, it's brand new, and it's for the Nintendo Case, you can use it turn on/off your Raspberry Pi.
geeekpi/epaper
This is a library driven by 52Pi E-ink, which can drive 2.13 inch electronic paper and other sizes of electronic paper. Currently, only 2.13 inch screen support is provided.
geeekpi/RPi_Pico_WH_IoT_Starter_kit
This is the demo code and libraries for RPi Pico WH IoT Starter Kit
geeekpi/station
geeekpi/microbit_democodes
This is demo codes for MicroBit Starter Kit
geeekpi/ultramate_starter_kit
Super kit
geeekpi/luma.examples
Companion repo for running examples against the luma.oled, luma.lcd, luma.led_matrix and luma.emulator display drivers.
geeekpi/Arduino_UNO_R3_Smart_Car_Kit
KZ-0058 Arduino UNO R3 Smart Car Kit Demo codes and documentations
geeekpi/Arduino_uno_r4_minima_kit
SKU: KZ-0056 Arduino UNO R4 Minima Kit
geeekpi/Arduino_uno_r4_wifi_kit
SKU: KZ-0054
geeekpi/docs
geeekpi/esp-toolkit
geeekpi/ESP32-tutorial
geeekpi/ESP32StarterKit
This is a Starter Kit which is based on ESP32-WROVER and some sensors. and demo code are based on MicroPython which is more simple for Starter users!
geeekpi/picsk
This is Complete Starter Kit for Raspberry Pi 4B/3B/3B+/Pi400
geeekpi/PiShrink
Make your pi images smaller!
geeekpi/rpi_ws281x
Userspace Raspberry Pi PWM library for WS281X LEDs