geeekpi/upsv3

Issues

• Does not recover if batteries are fully discharged

  #17 opened 8 months ago by dareekun
  1

• External button power control

  #16 opened 8 months ago by buxarin
  1

• [EP-0118 UPS] Main power cuts off to battery

  #10 opened 8 months ago by himuura
  12

• 0.0 for all readings

  #15 opened 8 months ago by pburkard
  1

• Firmware update UPS has stopped working

  #14 opened 8 months ago by ociekly
  2

• Can I change the brightness of the power state LED on board

  #13 opened 8 months ago by felixKwon
  1

• EP-0118 to Home Assistant integration

  #12 opened 8 months ago by 19leva89
  1

• demo.py error on RPI4 with Bullseye

  #11 opened 8 months ago by cdwilliams1
  1

• Read line voltage / charge status?

  #8 opened 8 months ago by MaxVonEvil
  2

• how long approx. does it take to charge batteries

  #7 opened 8 months ago by bengrissinger
  1

• 18650 batteries ??

  #9 opened 3 years ago by WBoerhoop
  2

• Unable to communicate with UPS

  #1 opened 4 years ago by tingles2233
  6

• Use UPS Parameter in Home Assistant

  #2 opened 4 years ago by Titanius
  1

• RTC and Low voltage auto shutdown

  #3 opened 4 years ago by buncopter
  2

• bad hardware

  #4 opened 4 years ago by Kels316
  1

• Is it possible to turn off the UPS board with `shutdown now`

  #5 opened 4 years ago by adricen
  2

• Detect the power state

  #6 opened 4 years ago by zvldz
  1