gnea/grbl-Mega

Issues

• DUAL AXIS on RAMPS board?

  #177 opened 3 months ago by albmef
  2

• Possible feature request? Integral Torch Height Controller For Plasma...

  #176 opened 6 months ago by ccwtruck
  0

• Homing set up problems

  #153 opened 3 years ago by MarkEMark2
  11

• Is this dead or will there be an update to 1.1h?

  #142 opened 4 years ago by d4mer
  4

• Pins don't align with #define statements

  #174 opened 6 months ago by ccwtruck
  3

• Automate multiple lines of Gcode

  #175 opened 7 months ago by M-Pioneers
  1

• X Axis on E0 Axis Pins?? MKS Gen_L V1.0 board

  #173 opened 9 months ago by Horsboll
  3

• Getting position data from grbl (on Arduino Mega) on another Arduino Uno

  #172 opened a year ago by murthybalaji0725
  1

• What's the enhancement compared to the original version of grbl?

  #171 opened a year ago by DanielYWoo
  0

• Nothing moves despite the OK returns.

  #152 opened a year ago by manuel-masiello
  10

• any reason for 1.9khz instead 1khz?

  #170 opened a year ago by ariefadha
  1

• Warnings on platformIO

  #169 opened a year ago by Elpablito
  1

• Timeout while uploading for Ramps 1.4

  #165 opened 2 years ago by DomML
  1

• Laser doesn´t turn ON

  #168 opened a year ago by Wolfi12345
  0

• EEPROM Checksum is either last char or last char+1

  #158 opened 3 years ago by drf5n
  2

• Jog does not respect G90 absolute

  #167 opened 2 years ago by foxalabs
  2

• Sg90 on mks base 1.6 with grbl

  #166 opened 2 years ago by alexc57
  8

• Help!! convert to GRBL **Spindle Connection.

  #163 opened 2 years ago by ashokavarthanan
  3

• Can't get any output in serial monitor

  #164 opened 2 years ago by tekkzLK
  2

• change USART 2

  #162 opened 3 years ago by 60024571
  0

• change z-max pin to a-min pin

  #161 opened 3 years ago by futurau
  0

• Insufficient dynamic range on AMASS

  #160 opened 3 years ago by J-Dunn
  1

• How to Compile for Arduino Mega and Ramps 1.4

  #157 opened 3 years ago by Technican
  5

• Can i use Bluetooth/RS232 Adaptor?

  #156 opened 3 years ago by rt1970
  1

• Error while uploading through Arduino IDE

  #155 opened 3 years ago by neerajbagi
  4

• Circuits diagram for lcd and Push buttons

  #154 opened 3 years ago by MohammadSalehi72
  3

• Laser connection on Ramps1.4

  #151 opened 3 years ago by jodougie2812
  0

• G38.2 not working anymore (was working in 0.9)

  #150 opened 3 years ago by McNugget6750
  3

• grbl-Mega to v1.1f

  #149 opened 3 years ago by manukieli
  0

• M CODES

  #148 opened 3 years ago by Tonybeta01
  3

• Resuming after a door/alarm state resets M7 (Coolant) state

  #147 opened 3 years ago by amoineau
  0

• changing duty cycle of pwm

  #146 opened 3 years ago by Rakesh6363
  0

• Any sence for ENABLE_SAFETY_DOOR_INPUT_PIN ?

  #143 opened 4 years ago by mzeddd
  2

• Alarm 47 !!! High speed problem

  #145 opened 4 years ago by sadeqzohdi
  2

• Remap spindle speed pin

  #144 opened 4 years ago by TheBaum87
  1

• Cloning not working Arduino Uno

  #141 opened 4 years ago by tomstud12
  1

• Cloning not working Arduino Uno

  #140 opened 4 years ago by tomstud12
  0

• Control Speed and Power with analog input on Arduino Mega

  #136 opened 4 years ago by kernge
  1

• Linux sender with more than 3 axis support

  #139 opened 4 years ago by Storen3
  3

• Laser connection on MKS Gen L V1 using PWM / TTL 5V

  #135 opened 4 years ago by nacnudz
  1

• PlatformIO support

  #138 opened 4 years ago by montyx99
  0

• A axis continues rotation

  #134 opened 4 years ago by arlimbad222
  0

• Yo. PNP NO proximity switches

  #133 opened 4 years ago by MarcinanProfesjonalista
  0

• Multi pass cut does not line up

  #132 opened 4 years ago by schrec
  1

• PROBLEM change X axis because it broke

  #131 opened 4 years ago by Dumper88
  1

• How to use GRBL functions without serial communication?

  #130 opened 4 years ago by RobertoCalani
  0

• Error 22

  #129 opened 4 years ago by Shahid-lateef
  18

• Pin mappings for MKS GEN 1.4 board, which is supposed to be like ramps

  #127 opened 5 years ago by jaygrovr
  1

• Motors not running

  #128 opened 4 years ago by gnurc
  0

• Serial comunication problem

  #126 opened 5 years ago by EragonPower
  3