gumyr/build123d

Issues

• Feature Request: Add support for exports to `pathlib.Path`: `.export_stl(path_object)`

  #685 opened 2 months ago by DeflateAwning
  0

• Infinite loop for a sweep along a wire that joins with the existing part.

  #687 opened 2 months ago by PaulBone
  4

• Intersection of an edge with a face or a wire doesn't work anymore

  #697 opened 4 months ago by cyberhuman
  0

• change `Shape.is_valid()` to `Shape.is_valid` (a property)

  #710 opened 4 months ago by jdegenstein
  1

• Mirroring a face or wire can misplace wires and create invalid geometry

  #719 opened 3 months ago by BlueDrink9
  2

• `cut` returns objects with dimension not set

  #736 opened 2 months ago by smurfix
  2

• Dimensional check is incorrect in Compound.__sub__(), other possible latent problems

  #752 opened 2 months ago by eecharlie
  7

• Create a method for spliting a face(s) from a shape from a wire defining its perimeter

  #751 opened 2 months ago by gumyr
  0

• What are the correct parameters for `sweep`

  #748 opened 2 months ago by RFARREY
  5

• Mesher crashes when run as a file upon exit

  #738 opened 3 months ago by jdegenstein
  2

• Broken pip install cadquery-ocp dependency for Apple silicon platform

  #753 opened 2 months ago by eecharlie
  3

• Consider using dprism for extrude_taper instead of loft

  #746 opened 3 months ago by gumyr
  1

• Create a tracing tool that can extract all of the OCP calls (with parameters) from buid123d code

  #750 opened 3 months ago by gumyr
  1

• STEP Missing Surfaces?

  #745 opened 3 months ago by Spectre5
  17

• Add new Slot type `SlotPointToPoint`

  #749 opened 3 months ago by jdegenstein
  0

• Fix deprecation warning for teacup example

  #721 opened 3 months ago by jdegenstein
  0

• Add a section to the docs describing all the ways to change object locations

  #747 opened 3 months ago by gumyr
  1

• Create a section in the docs attempting to describe the design process

  #743 opened 3 months ago by gumyr
  4

• DoubleTanchetArc fails due to axis is_parallel check

  #728 opened 3 months ago by bikemike
  1

• Center of Gravity

  #729 opened 3 months ago by slobberingant
  0

• Can't figure out what providing an Axis object to a Locations context does based on documentation

  #735 opened 3 months ago by weerasuriya
  3

• offset_2d on a closed wire fails with Side.RIGHT or Side.LEFT

  #739 opened 3 months ago by WayneSherman
  0

• Inheriting coordinate systems?

  #742 opened 3 months ago by l29ah
  3

• [Request] Max counter-sink depth for ClearanceHole

  #740 opened 3 months ago by petejohanson
  1

• Test enforces stricter version bounds than pyproject.toml

  #731 opened 3 months ago by erooke
  1

• Use optimal=False in bounding_box size calculations where applicable

  #705 opened 3 months ago by jdegenstein
  0

• Black is the new white?

  #727 opened 3 months ago by benlaurie
  6

• The BuildSketch in a method failed to add faces to the outside BuildPart context

  #723 opened 3 months ago by XCYRKDSDA
  9

• ExtensionLine offset alters dimensions

  #717 opened 3 months ago by tshead
  2

• Bug in Shape.split()

  #698 opened 3 months ago by makerC-LV
  1

• trim fails on specific wire

  #726 opened 3 months ago by gumyr
  0

• Make convex hulls work outside of the XY-Plane

  #725 opened 3 months ago by CarpeNecopinum
  4

• param_at_point fails for CenterArc

  #708 opened 3 months ago by bikemike
  3

• Fillet Fails on Simple 2D Geometry, Succeeds in 3D

  #720 opened 3 months ago by ZacharyKF
  2

• Add `Edge.make_parabola`

  #722 opened 3 months ago by jdegenstein
  0

• Example for using a lambda inside `ShapeList.filter_by`

  #711 opened 4 months ago by CarpeNecopinum
  2

• export_step including placement/location data

  #716 opened 4 months ago by thsmit
  4

• Typo(?) in general_examples_algebra.py, example 23.

  #714 opened 4 months ago by javimixet
  1

• Consider adding `predicates.py` file that contains definitions for useful e.g. lambdas for filtering, sorting and grouping

  #712 opened 4 months ago by jdegenstein
  0

• 2D Offset breaks due to overlapping wires

  #702 opened 4 months ago by CarpeNecopinum
  1

• scale(Curve() + ThreePointArc()) won't show()

  #694 opened 4 months ago by benlaurie
  1

• Add conda install via conda-forge

  #703 opened 4 months ago by gumyr
  0

• ExportDXF with option to convert Wires to DXF Polylines [FEATURE]

  #701 opened 4 months ago by WayneSherman
  0

• STEP file of filleted cylinder invalid according to OnShape

  #693 opened 4 months ago by jdegenstein
  7

• Edge.common_plane fails

  #692 opened 4 months ago by gumyr
  0

• Pack demo assets not showing in docs

  #689 opened 4 months ago by jdegenstein
  3

• labels seem to be ignored on faces

  #688 opened 4 months ago by 0xorial
  3

• Docs: Import/Export references a function with a deprecation warning

  #682 opened 4 months ago by DeflateAwning
  6

• Add ability to attach a thumbnail to 3MF export via Mesher

  #683 opened 4 months ago by jdegenstein
  0

• Add support for guide curves to `Solid.sweep`

  #681 opened 4 months ago by jdegenstein
  1