XELA Sensor Server ROS module package

Disclaimer

This package is released As Is and under GNU GPL v3 license.

Purpose

This package is used to convert XELA Server packets into ROS Service messages.

Warnings

ROS has limits on how many messages it is able to send per second, which can be a lot less than what the server app does. Therefore this app has to dump excess messages by overwriting the buffer. There are several residual parts from initial closed source module with confidential parts stripped out.

Requirements

Python 2.7 (not recommended) or Python 3.4+ websocket-client package

Use

Installation

Copy the xela_server directory into your catkin workspace src directory and build as usual.

Run

Either run the launch file roslaunch xela_server service.launch or activate everything separately roscore, xela_server and rosrun xela_server xela_service

Note For the launch file, the xela_server app must be in the path variable or you would need to replace the xela_server app inside the scripts directory with the one from the main app suite

Services

Service call	Explanation	Example output
`rosservice call /xServXY 1 2`	Get X and Y for Taxel 2 on Sensor 1	values: [32572, 31596]
`rosservice call /xServXYZ 1 2`	Get X, Y and Z for Taxel 2 on Sensor 1	values: [32572, 31596, 35901]
`rosservice call /xServX 1 2`	Get X for Taxel 2 on Sensor 1	value: 32572
`rosservice call /xServY 1 2`	Get Y for Taxel 2 on Sensor 1	value: 31596
`rosservice call /xServZ 1 2`	Get Z for Taxel 2 on Sensor 1	value: 35901
`rosservice call /xServStream 1`	Get Full data from Sensor 1	xyz: [1: [32457, 32553, 32057], 2: [32572, 31596, 35901]… ]

Topics

Topic name	Topic message type	Description
`/xServTopic`	`xela_server/XStream`	Get all sensors and taxels as a constant stream

ROS Launch arguments

Argument	Description
noserver:=1	Will not run xela_server (requires external launch of the app on same or different computer)
port:=5000	Define xela_server port, default is 5000
ip:=127.0.0.1	Define xela_server IP, default is 127.0.0.1
file:=/etc/xela/xServ.ini	Define configuration file for xela_server, default is /etc/xela/xServ.ini
d:=0	Define debug level, default 0, max 3. Prints info based on service requests made via ROS 1 - Request type only 2 - Request type and sensor/taxel info 3 - Request type, sensor/taxel info and returned values

Example code for ROS

File: example.py

#!/usr/bin/env python

import rospy from xela_server.srv
import XelaSensorXYZ
import sys

rospy.init_node('use_service') 

# wait the service to be advertised, otherwise the service use will fail 
rospy.wait_for_service('xServXYZ') 

# setup a local proxy for the service (we will ask for X,Y and Z data) 
srv=rospy.ServiceProxy('xServXYZ', XelaSensorXYZ) 

# use the service and send it a value. 
# In this case, I am sending sensor: 1 and taxel: 3 
service_example=srv(1, 3) 

# print the result from the service 
print(service_example) 

# close the app 
sys.exit(0)

In case of newer ROS like Noetic, you might need to change the shebang line to support python3

haraduka/xela-server-ros