Issues
- 6
- 2
- 2
read: Network is down
#64 opened by pompushko - 4
- 2
- 2
IP over CAN ISO-TP multi-host
#61 opened by baryluk - 7
MSG_CMSG_COMPAT set by the kernel for `recvmsg`
#59 opened by dissecto - 2
Compiling of branch mainline-5.4+
#60 opened by pompushko - 3
unstable transmission of data: sequence number of consecutive frames get messed up
#58 opened by muehlke - 12
Sending rate cannot be faster than 300us
#57 opened by SeifHadrich - 8
- 2
FlowControl frame address tx_id vs. rx_id - 8?
#55 opened by camercu - 5
When trying to read 8K messages on ISO-TP socket using Classic CAN receive back -1 with errno 110 ETIMEDOUT
#54 opened by derek-will - 1
- 31
- 4
read() does not return after a call to close()
#41 opened by Sauci - 3
how to send > 4095 isotp message
#50 opened by jinbaotang - 23
missing step from installation instructions
#25 opened by AndySchroder - 4
- 1
- 18
use read() function and add notify function.
#47 opened by jinbaotang - 2
ERRNO 84 on recv()
#48 opened by polybassa - 2
- 1
Not able to build for raspberry pi
#45 opened by Kallappambk - 7
blocking read() function using ISO-TP driver !
#44 opened by ayoubensi - 5
- 1
Issue : Not able to build can-isotp
#39 opened by Kallappambk - 17
path towards mainline?
#28 opened by pdp7 - 2
ISSUE: ISO-TP Kernel build on Raspberry-Pi 4B
#38 opened by Kallappambk - 18
- 3
~5ms delay between consecutive frames
#23 opened by zzincubus - 5
How to fix OSError: [Errno 97] on Jetson TX2?
#31 opened by kilianbr - 2
What *should* isotpdump look like?
#19 opened by granmadave - 4
- 7
#include "compat.h" obsolete?
#33 opened by Thomseeen - 7
Get status of transmission?
#27 opened by pylessard - 1
- 1
Canfd support on virtual can?
#29 opened by swanandb2 - 26
isotpsniffer "socket: Protocol not supported"
#20 opened by granmadave - 2
- 8
warning when make modules_install
#15 opened by hsilva7 - 1
warning and ssl error when make modules_install
#26 opened by litaoxyz - 2
insmod: ERROR: could not insert module ./net/can/can-isotp.ko: Unknown symbol in module
#24 opened by litaoxyz - 2
candump shows traffic, isotpdump shows traffic, isotprecv does not receive frame
#22 opened by brandonros - 2
Doubt: Message Recovery
#18 opened by alfonsobrandao - 3
- 6
Error while building
#14 opened by MaterFertex - 2
SIOCGSTAMP fails with Linux Kernel 5.2.1
#16 opened by akorb - 3
Incorrect include path during kernel build?
#13 opened by awilke - 9
CAN frames lost when stmin > 0
#12 opened by pylessard