hd-zero/hdzero-vtx

Issues

• Unable to display VTX Power on iNav OSD

  #203 opened 7 months ago by MartinHugh
  1

• Questions: FreestyleV2 Power Output with Keypad Only

  #205 opened 6 months ago by Brets0150
  3

• Whoop lite vtx can't see OSD Menu and camera menu

  #206 opened 6 months ago by OscarPonsetti-OSCARNOVA
  1

• VTX off with stick command did not work on on FW 06022023

  #103 opened 7 months ago by T-M-0
  8

• Improve video transmission diagnostics

  #118 opened 7 months ago by MartinHugh
  9

• Display "No VTX Input" in Goggles when there is a MIPI/Camera problem

  #194 opened 10 months ago by MartinHugh
  1

• Firmware V1.3.0 led strip issue

  #147 opened a year ago by BadSide84
  7

• Allow wider range for "25mw offset"

  #98 opened 10 months ago by evilC
  1

• Signal spills over into other channels

  #182 opened a year ago by SentinelFour
  11

• [Feature Request] MIPI CSI - ribbon connector for single board computers?

  #186 opened a year ago by Arduhat
  1

• Exit narrow band mode using firmware update?

  #171 opened a year ago by evilC
  7

• Add user initiated PAT test at boot time

  #142 opened a year ago by pitts-mo
  1

• MSP VTX OSD channel designator changes at arming - very confusing

  #165 opened a year ago by MrMap
  4

• Lowband on v1.5.0-rc1

  #169 opened a year ago by zandorsp
  5

• HD OSD elements off-screen

  #136 opened a year ago by evilC
  29

• PAT Version of firmware

  #152 opened a year ago by zandorsp
  3

• With LP_MODE on, VTX menu shows 25mw

  #100 opened 2 years ago by evilC
  11

• [Bug] LP Mode, Pit Mode, Vtx OFF on first boot not working on INAV 6.0 and FTTEC Alpha

  #133 opened a year ago by T-M-0
  5

• iNav - HD Zero - Stick Command Issues

  #116 opened a year ago by MartinHugh
  2

• ArduPilot - HD Zero - Stick Command Issues (unintended menu opening)

  #112 opened a year ago by DroneUnit
  1

• Feature request: Irc tramp protocol

  #85 opened a year ago by timfredriksson
  3

• [Feature Request] LP mode not dependent on two-way comms

  #127 opened 2 years ago by evilC
  1

• firmware for the freestyle vtx that uses the smartaudio pad as rx for osd

  #135 opened a year ago by Hrisfpv
  3

• FW 1.3.0 Whoop Lite temperature issues / won't stay at 200mW if selected

  #139 opened a year ago by Kallepitch
  2

• [Feature request] Black and white mode for more range/penetration

  #153 opened a year ago by RyuGood0
  1

• [Feature Request] Better pitmode

  #128 opened 2 years ago by lesharodin
  2

• Versioning simplification

  #154 opened a year ago by matyas-brenner
  0

• nano90 drunk camera

  #140 opened a year ago by ligenxxxx
  1

• 1080p mode corrupts OSD elements in DVR recording

  #144 opened a year ago by MartinHugh
  1

• [Feature Request] Turn off analog bay audio recording

  #129 opened 2 years ago by lesharodin
  1

• VTX/Camera Menu Control/Smart Audio for Wings without Flight Controllers

  #99 opened 2 years ago by CruiseFPV
  2

• Feature Request: Better (more sensible) values for shutter

  #97 opened 2 years ago by sabshire
  2

• FPV Combat hit detection.

  #95 opened 2 years ago by aviphysics
  1

• Bug: Switching Camera Profiles on Micro V2 causes erratic display

  #96 opened 2 years ago by sabshire
  1

• Compatibility of nano90 with VRX 2sma/4sma

  #81 opened 2 years ago by FIynix
  1

• OSD Refresh rate.

  #78 opened 2 years ago by lesharodin
  4

• temp_err not reset after entering pit mode

  #119 opened 2 years ago by john-k3nnedy
  3

• HDZERO green image issue at icestorm when changing channels

  #125 opened 2 years ago by Tbell123
  0

• High contrast video every ~5 power cycles or so on whoop lite vtx.

  #83 opened 2 years ago by Tbell123
  9

• V1 Cameras "flashing" image

  #102 opened 2 years ago by MacDaddyFPV
  9

• Feature Request: Shortcut to 25mw

  #90 opened 2 years ago by sabshire
  4

• Osd freezes then dissappears

  #82 opened 2 years ago by Muirson
  2

• DVR record control by Radio

  #86 opened 2 years ago by artusmuc
  3

• Camera image cuts every few seconds on FreestyleVTX.Rev22122022 using Foxeer digisight v3

  #73 opened 2 years ago by oldrootbeer
  3

• Unified vtx firmware file

  #79 opened 2 years ago by oldrootbeer
  1

• New "On Time" and "Armed Time" icons appear transposed

  #74 opened 2 years ago by Yith1
  1

• Betaflight 4.4 HD support

  #69 opened 2 years ago by artusmuc
  3

• Feature request to update vtx firmware through usb interface

  #52 opened 2 years ago by kakashi2018
  5

• [Request] Could you make a simple libary for Arduino to send OSD to HDZero?

  #58 opened 2 years ago by human890209
  2

• Unlocked Freestyle VTX on MSP VTX doesn´t put 500 and MAX power on VTX Table

  #59 opened 2 years ago by zandorsp
  3