Regarding Multizone with RISCV

[RamyaBoggaram]

Tried to check on the Multizone-sdk github link and worked on it and found this as my problem for now to solve I would need your help please help me out on doing this.

/home/ramyab/riscv-openocd-20210807/bin/openocd -f bsp/X300/openocd.cfg &
/home/ramyab/riscv-gnu-toolchain-20210618/bin/riscv64-unknown-elf-gdb multizone.hex --batch -ex "set mem inaccessible-by-default off" -ex "set remotetimeout 240" -ex "set arch riscv:rv32" -ex "target extended-remote localhost:3333" -ex "monitor reset init" -ex "monitor flash protect 0 64 last off" -ex "load" -ex "monitor resume" -ex "monitor shutdown" -ex "quit"
Open On-Chip Debugger 0.11.0+dev-01860-g9aa8bab63-dirty (2021-08-08-01:14)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "jtag". To override use 'transport select '.
The target architecture is set to "riscv:rv32".
Info : ftdi: if you experience problems at higher adapter clocks, try the command "ftdi_tdo_sample_edge falling"
Info : clock speed 10000 kHz
Error: JTAG scan chain interrogation failed: all zeroes
Error: Check JTAG interface, timings, target power, etc.
Error: Trying to use configured scan chain anyway...
Error: riscv.cpu: IR capture error; saw 0x00 not 0x01
Warn : Bypassing JTAG setup events due to errors
Error: dtmcontrol is 0. Check JTAG connectivity/board power.
Warn : target riscv.cpu examination failed
Info : starting gdb server for riscv.cpu on 3333
Info : Listening on port 3333 for gdb connections
Error: JTAG scan chain interrogation failed: all zeroes
Error: Check JTAG interface, timings, target power, etc.
Error: Trying to use configured scan chain anyway...
Error: riscv.cpu: IR capture error; saw 0x00 not 0x01
Warn : Bypassing JTAG setup events due to errors
Error: dtmcontrol is 0. Check JTAG connectivity/board power.
openocd: src/target/riscv/riscv-011.c:435: dbus_scan: Assertion info->addrbits != 0' failed. localhost:3333: Connection timed out. "monitor" command not supported by this target. "monitor" command not supported by this target. You can't do that when your target is exec'
"monitor" command not supported by this target.
"monitor" command not supported by this target.

The connection of JTAG is done by referring to the documentation provided by sifive and jtag producers (Olimex) But still we are getting this error . Any help is Appreciated. Thank you

[Hex-Five-Labs]

Duplicate #56