/range-mcl

Range Image-based LiDAR Localization for Autonomous Vehicles Using Mesh Maps (chen2021icra)

Primary LanguagePythonOtherNOASSERTION

Range Image-based 3D LiDAR Localization

This repo contains the code for our ICRA2021 paper: Range Image-based LiDAR Localization for Autonomous Vehicles.

Developed by Xieyuanli Chen, Ignacio Vizzo, Thomas Läbe and Jens Behley.

It uses a novel sensor model with MCL to achieve 3D LiDAR global localization and pose tracking. The sensor model compares the range image of the current LiDAR scan to the synthetic range images rendered from the triangular mesh to update the weight of particles. This method is simple but can be used with different types of LiDAR scanners in different datasets and environments without fine-tuning.

Online localization demo.

Visualizations: Left: the triangular mesh map and the localization results; Right: Sub-tile maps

Table of Contents

  1. Introduction
  2. Publication
  3. Dependencies
  4. How to use
  5. Related work
  6. License

Publication

If you use our implementation in your academic work, please cite the corresponding paper:

@inproceedings{chen2021icra,
	author = {X. Chen and I. Vizzo and T. L{\"a}be and J. Behley and C. Stachniss},
	title = {{Range Image-based LiDAR Localization for Autonomous Vehicles}},
	booktitle = {Proc. of the IEEE Intl. Conf. on Robotics \& Automation (ICRA)},
	year = 2021
}

Dependencies

The code was tested with Ubuntu 20.04 with its standard python version 3.8.

We are using OpenGL to do achieve fast rendering, so you will need an OpenGL capable graphics card (we use Nvidia cards, e.g. 2080Ti) to be fast.

  • System dependencies related to OpenGL:

    sudo apt-get update 
    sudo apt-get install libgl1-mesa-glx
  • Other system dependencies:

    sudo apt-get update 
    sudo apt-get install libusb-1.0   # open3d 0.12.0 dependency
    sudo apt-get install -y python3-pip
    sudo -H pip3 install --upgrade pip
  • Python dependencies (may also work with different versions than mentioned in the requirements file)

    sudo -H pip3 install -r requirements.txt

How to use

Quick use

For a quick demo, one could download the mesh map and LiDAR data, extract the them in the /data folder following the recommended data structure, and then run:

cd src/
python3 main_range_mcl.py

One could then get the online visualization of range-based MCL as shown in the gif.

More detailed usage

Here, we provide more detailed information about our range-image-based LiDAR localization method, including building mesh maps, evaluating the localization results and more pre-built maps of different datasets.

Build mesh map

To build a mesh map, we use the Poisson surface reconstruction provided by the Open3D library. One need to download the LiDAR data, extract the them in the /data folder following the recommended data structure, and then run:

python3 build_mesh_map.py

For fast calculating and generating range and normal data for LiDAR scans, one could find more details here.

Important tips

  • We used our moving object segmentation method (code) to clean the scans before building the map. One could also use other methods to clean the map.
  • To build the mesh map, one needs to first get the map reference poses provided by the dataset or obtained use SLAM.
  • For the sake of demonstration, we use the same data from KITTI 07 for both mapping and localization. However, in a real application (e.g. all the experiments in the paper), the data for mapping and localization are collected in different seasons of the same area.
  • For the sake of demonstration, we use the ground truth odometry poses provided by the KITTI dataset and add noise to them. In a real application, one doesn't need to add noise to the odometry information (see motion_model.py).

Evaluation

Once finished the localization process, one would get the localization results at /results. To evaluate the localization results, one could check the evaluation.py. For a quick demo, one just need to run

python3 evaluation.py

Collection of mesh maps

Notice that, the mesh maps were generated using the data from KITTI dataset, MulRan dataset and Apollo dataset. Please register on their official website to apply for the original data.

Related work

Puma: Poisson Surface Reconstruction for LiDAR Odometry and Mapping

We also released the implementation of the algorithms described in our paper Poisson Surface Reconstruction for LiDAR Odometry and Mapping. This is a LiDAR Odometry and Mapping pipeline that uses the Poisson Surface Reconstruction algorithm to build the map as a triangular mesh online.

Overlap-localization: Overlap-based 3D LiDAR Monte Carlo Localization

We previously also proposed a learning-based global localization method, called overlap localization. It uses the OverlapNet to train an observation model for Monte Carlo Localization and achieves global localization with 3D LiDAR scans.

License

Copyright 2021, Xieyuanli Chen, Ignacio Vizzo, Thomas Läbe, Jens Behley, Cyrill Stachniss, Photogrammetry and Robotics Lab, University of Bonn.

This project is free software made available under the MIT License. For details see the LICENSE file.