hydronics2/mojo_fpga_hdmi_to_APA102

example written in Lucid (verilog) for the Mojo FPGA development board. Reads pixels from HDMI and sends pixel data to APA102 LEDs over SPI.

mojo_fpga

This design takes an HDMI signal and outputs a 34 long x 20 high grid of APA102 leds.

The hardware consists of a Spartan 6 FPGA on an Mojo development board by Embedded Micro... using their IDE written in Lucid which is similar to Verilog: https://embeddedmicro.com/products/mojo-v3

Also uses the HDMI shield for the Mojo by Embedded Micro: https://embeddedmicro.com/products/hdmi-shield

This design builds off of a lucid module example for decoding HDMI signal: https://embeddedmicro.com/blogs/tutorials/hdmi-shield-basics

Here's what it looks like live: https://www.instagram.com/p/Bi2yngpBJ0O