ibell/pdsim

Issues

• Installation Issue- Building Wheel for PDSim error

  #89 opened 10 months ago by TolikPa
  26

• Reynolds number in heat transfer coefficient

  #87 opened a year ago by gverez
  2

• Valve Modelling

  #86 opened a year ago by tomam28
  2

• PDSim GUI failed to use the vapor injection function

  #85 opened a year ago by Wang-Zongwei
  2

• Problem with starting simulations

  #82 opened a year ago by tomam28
  4

• PDSim GUI failed to use Euler/Heun integrator

  #84 opened a year ago by Wang-Zongwei
  5

• PDSim GUI failed to copy/paster coordinate from excel

  #83 opened a year ago by Wang-Zongwei
  1

• Different discharge port diameter but exactly same performance result

  #80 opened a year ago by Wang-Zongwei
  4

• PDSim GUI failed to use REFPROP fluid

  #79 opened a year ago by Wang-Zongwei
  7

• Pdsim failed to output results to Excel

  #73 opened a year ago by Wang-Zongwei
  1

• ValueError for certain cases of PDSim

  #75 opened 2 years ago by caskandavor
  7

• Is the specified mechanical efficiency equation wrong ?

  #74 opened 2 years ago by caskandavor
  8

• Screw or scroll expander

  #72 opened 3 years ago by David-Mamrilla
  10

• Installation problems

  #71 opened 3 years ago by David-Mamrilla
  0

• About the rotor compressor documents

  #70 opened 3 years ago by caofali
  1

• Install Process Guidance

  #68 opened 4 years ago by huges84
  8

• Scroll: sum of spinning moments not zero with ArcLineArc

  #67 opened 3 years ago by ibell
  2

• StateFlooded TypeError

  #69 opened 4 years ago by gapablo
  3

• how to use GUI

  #59 opened 4 years ago by EdwardWooCN
  4

• time.clock deprecated since py3.3 removed py3.8

  #57 opened 4 years ago by danieldjewell
  3

• Scroll: add sanity checks for sums of Fx/p and Fy/p being zero

  #66 opened 4 years ago by ibell
  0

• Scroll: radial flow path from first compression to s1 and s2 too big

  #65 opened 4 years ago by ibell
  0

• Scroll: missing radial leakage paths with ddd chamber

  #64 opened 4 years ago by ibell
  0

• Fix initialization of CV for scroll

  #63 opened 4 years ago by ibell
  0

• About is broken

  #60 opened 4 years ago by ibell
  0

• Configuration causes crashes

  #62 opened 4 years ago by ibell
  1

• Config file cannot be loaded

  #49 opened 5 years ago by sebdenis
  2

• Screenshot misses

  #61 opened 4 years ago by ibell
  0

• Using PDSim in the cloud with Jupyter Notebook/Google Colab

  #58 opened 4 years ago by MaEnr
  3

• Modeling mixtures in scroll compressor

  #56 opened 4 years ago by mohsint7
  4

• License

  #54 opened 5 years ago by sgolle
  4

• Potential discontinuity of scroll_involute_axial_force

  #33 opened 5 years ago by sebdenis
  4

• Valve can exceed their limits

  #47 opened 5 years ago by ibell
  6

• silent crash when running the example recip_compressor.py

  #43 opened 5 years ago by gfsReboucas
  11

• Chamber pairs of radial leakage do not change after the discharge angle

  #40 opened 5 years ago by EdwardWooCN
  5

• Enable multiple lumped temperatures in the overall energy balance

  #21 opened 5 years ago by davideziviani
  6

• ForceFcn for pockets C1&2 are not well defined

  #31 opened 6 years ago by sebdenis
  9

• Discontinuity of forces between pockets c and d

  #32 opened 6 years ago by sebdenis
  1

• Changing state after loading

  #29 opened 6 years ago by ibell
  0

• Chamber initialization

  #28 opened 6 years ago by ibell
  0

• Generalize friction corrected Isentr nozzle flow model

  #24 opened 8 years ago by davideziviani
  6

• Duplicate calls at hmin

  #13 opened 9 years ago by ibell
  0

• Is DT the right set of variables?

  #14 opened 9 years ago by ibell
  1

• Find a way to disable bearings and use bearing friction coefficient

  #4 opened 9 years ago by ibell
  0

• Cannot load config file that has pressure under ptriple

  #6 opened 9 years ago by Oberklasse
  2

• Upload a new GUI version

  #7 opened 9 years ago by ibell
  0

• Discharge state text panels can't update, require use of the unit converter

  #5 opened 9 years ago by ibell
  0

• When using unit converter in inlet state, doesn't update

  #2 opened 9 years ago by ibell
  0

• Potential memory leak

  #3 opened 9 years ago by ibell
  0