iltis42/XCVario

Issues

• Some questions about the code and speed measurements

  #327 opened a month ago by brightproject
  2

• Advanced AHRS Screen. Add Speed and Altimeter tape

  #250 opened a year ago by XCNav
  2

• Polar DG 1000S/20 175,-2.80 seems to bad

  #325 opened 4 months ago by iwl
  1

• Sound Problem after switching Vario or target mode

  #322 opened 6 months ago by gliderfun
  2

• Gear warning gets breaks down if using $g,w commands and pages are switched.

  #321 opened 7 months ago by mbellorini
  5

• No audio warning for gear and flarm alert (3)

  #320 opened 7 months ago by Sundown3867
  4

• Airfield elevation setup for large value changes should be improved

  #318 opened 8 months ago by speed-axel
  3

• BLE works on occasion, but is not robust

  #242 opened a year ago by kubark42
  5

• Phyiscal Switch for Water

  #251 opened a year ago by lordfolken
  1

• [Feature request] Debug screen

  #241 opened a year ago by kubark42
  3

• Weight calculation assumes a hardcoded constant 80kg

  #243 opened a year ago by kubark42
  7

• [Feature Request] Update SDK to one which supports ESP32S3 chips

  #238 opened a year ago by kubark42
  8

• AHRS Autozero config unclear

  #231 opened 2 years ago by hjr
  3

• Info for another lcd display

  #225 opened 2 years ago by docop
  1

• DG800S/15 Polar not correct

  #206 opened 2 years ago by mbellorini
  3

• Sync temperature to client directly after boot

  #205 opened 2 years ago by hjr
  3

• Water ballast synch between XCV and XCS

  #202 opened 2 years ago by hjr
  4

• Synch crew-,empty- and ballast-weight with XCSoar

  #201 opened 2 years ago by hjr
  5

• Easier firmware update procedure

  #98 opened 2 years ago by lordfolken
  10

• Aircraft Switches

  #177 opened 2 years ago by lordfolken
  2

• st7789 and ILI9341 Displays with new eglib

  #193 opened 2 years ago by skizzofly
  4

• s2f switch in two seater setup

  #183 opened 3 years ago by hjr
  11

• Use static pressure instead of compensated pressure when motor is running

  #174 opened 3 years ago by volkmarnissen
  4

• Since 4bf9674ffaf7dc5abe3c678598ec761ff4db4c2b, not buildable

  #172 opened 3 years ago by CazYokoyama
  8

• s2f push button sluggish

  #171 opened 3 years ago by hjr
  1

• XcSoar/XcVario sync problems continued!

  #144 opened 3 years ago by GrahamD2
  10

• XCS MC sync to XCV over serial S2

  #145 opened 3 years ago by hjr
  1

• XCSoar/XCVario sync problems

  #141 opened 3 years ago by GrahamD2
  1

• Weather data in XCSoar / Second Wifi Adapter

  #135 opened 3 years ago by volkmarnissen
  1

• Connected FLARM stops transmitting

  #113 opened 3 years ago by GrahamStallard
  5

• Make working Flarm connection visible in System configuration/Check different baud rates in Flarm configuration

  #132 opened 3 years ago by volkmarnissen
  3

• CAN BUS magnetic heading sensor

  #112 opened 3 years ago by GrahamStallard
  4

• Unprecise transmitted water ballast from XCS <-> XCV

  #74 opened 3 years ago by hjr
  1

• Another IP address on OTA instead of 192.168.0.1

  #91 opened 3 years ago by CazYokoyama
  1

• MC unit handling on interface to XCSoar

  #73 opened 3 years ago by hjr
  10

• Merge UL display into retro display

  #84 opened 3 years ago by iltis42
  1

• How to build

  #65 opened 3 years ago by nferruzzi
  1

• [Feature request] Frequency dependent volume adjustment

  #61 opened 3 years ago by Thum
  8

• Airfield elevation in feet increments by +/-5m instead of +/-5 feet

  #62 opened 3 years ago by nbonniere
  3

• Crashes on start after selecting student mode

  #59 opened 3 years ago by CalvinSchwartz
  4

• [Feature Request] Change "Speed to Fly Switch" behaviour in Settings

  #58 opened 3 years ago by CalvinSchwartz
  2

• Client configuration for glider polar inherited from master (improvement)

  #41 opened 4 years ago by hjr
  2

• Audio volume not correctly restored after FLARM Traffic alert

  #54 opened 4 years ago by iltis42
  1

• Garbled flap indicator. (21.0331-18)

  #37 opened 4 years ago by hjr
  2

• Like to see the heading in sync on the client (improvement on 21.0331-18).

  #35 opened 4 years ago by hjr
  1

• Sound server for XCSoar (improvement)

  #39 opened 4 years ago by hjr
  1

• Crash on setting the flap sensor choice. (21.0331-18)

  #38 opened 4 years ago by hjr
  1

• s2f switch for two seater setup (improvement).

  #40 opened 4 years ago by hjr
  1

• Bugs setting (improvement)

  #33 opened 4 years ago by hjr
  1

• Like to see the flap indication in sync on the client device (improvement to 21.0331-18)

  #36 opened 4 years ago by hjr
  1