j-c-m/ubnt-letsencrypt

Issues

• Failed to create the file /config/ssl/cacert.pem: No such file or directory

  #51 opened a year ago by uniquepurpose
  1

• SSL certificate problem: unable to get local issuer certificate (potentially just on older firmware)

  #42 opened a year ago by m-hume
  4

• wildcard certificate

  #50 opened a year ago by xljuol
  1

• Additional steps needed for router's FQDN to work locally

  #49 opened a year ago by ivordurham
  0

• Less issue vs a question...

  #48 opened a year ago by lethalox
  1

• `_ecc` suffix in the certificate leads to failure of reload command

  #47 opened 2 years ago by shimikano
  5

• Router firmware update breaks cert setup

  #46 opened 2 years ago by sonnyb9
  4

• README.md comment

  #44 opened 3 years ago by jsikorsky
  0

• set system static-host-mapping not needed?

  #43 opened 3 years ago by rogerthn2019
  1

• No longer able to connect to https on LAN interface

  #41 opened 3 years ago by ErikSchulp
  2

• Verify error:Invalid response from http://

  #40 opened 3 years ago by nickvanbaelen
  1

• ZeroSSL requires registration

  #39 opened 3 years ago by uniquepurpose
  5

• Not working for me. Any known issues with Dyn DNS?

  #37 opened 4 years ago by VasuInukollu
  1

• Verify error:Invalid response from http://

  #38 opened 4 years ago by TeslaOwnerTips
  6

• Verify error and timeout.

  #9 opened 7 years ago by danrossi
  11

• Not an issue

  #36 opened 4 years ago by Sierra1011
  0

• Timeout when running renew.acme.sh

  #35 opened 4 years ago by zxli
  1

• Kills GUI

  #34 opened 4 years ago by michaelahess
  4

• PID file not reliable

  #29 opened 5 years ago by wcrosbie
  2

• add firewall setup

  #33 opened 5 years ago by ryanmerolle
  1

• acme.sh no longer likes to be run with sudo

  #27 opened 5 years ago by joeshaw
  4

• Support for 2.x.x

  #26 opened 6 years ago by charlieball
  3

• --force flag doesn't work

  #23 opened 6 years ago by Baenwort
  2

• A record needed

  #18 opened 7 years ago by bwoodruff
  2

• EdgeSwitch

  #19 opened 7 years ago by bwoodruff
  2

• Readme instructions missing a step

  #17 opened 7 years ago by bandtank
  1

• Kills GUI then stops

  #16 opened 7 years ago by michaelahess
  2

• CloudFlare

  #14 opened 7 years ago by dotzerosec
  0

• Getting command not found error.

  #13 opened 7 years ago by zxli
  1

• Script failing on new setup

  #8 opened 7 years ago by hulu1522
  6

• Could not connect to

  #7 opened 8 years ago by tylercal
  3

• No valid IP addresses found

  #6 opened 8 years ago by tylercal
  2

• Will this work for WAN access as well?

  #5 opened 8 years ago by ambroselittle
  2

• Failing on verification

  #3 opened 8 years ago by rpetty
  3

• Quick Question about Renew

  #4 opened 8 years ago by innermotion
  1

• Error when initializing new certificate

  #1 opened 8 years ago by kenperkins
  10