The ISCA 2020 paper describes the goals of Accel-Sim and introduces the tool. This readme is meant to provide tutorial-like details on how to use the Accel-Sim framework. If you use any component of Accel-Sim, please cite:
Mahmoud Khairy, Zhensheng Shen, Tor M. Aamodt, Timothy G. Rogers,
Accel-Sim: An Extensible Simulation Framework for Validated GPU Modeling,
in 2020 ACM/IEEE 47th Annual International Symposium on Computer Architecture (ISCA)
This repository also includes AccelWattch: A Power Modeling Framework for Modern GPUs. The MICRO 2021 paper introduces AccelWattch. Please look at our AccelWattch MICRO'21 Artifact Manual for detailed information on various AccelWattch components. For information on just running AccelWattch, please look at the AccelWattch Overview section in this read-me. If you use any component of AccelWattch, please cite:
Vijay Kandiah, Scott Peverelle, Mahmoud Khairy, Amogh Manjunath, Junrui Pan, Timothy G. Rogers, Tor Aamodt, Nikos Hardavellas,
AccelWattch: A Power Modeling Framework for Modern GPUs,
in 2021 IEEE/ACM International Symposium on Microarchitecture (MICRO)
This package is meant to be run on a modern linux distro. A docker image that works with this repo can be found here. There is nothing special here, just Ubuntu 18.04 with the following commands run:
sudo apt-get install -y wget build-essential xutils-dev bison zlib1g-dev flex \
libglu1-mesa-dev git g++ libssl-dev libxml2-dev libboost-all-dev git g++ \
libxml2-dev vim python-setuptools python-dev build-essential python-pip
pip3 install pyyaml plotly psutil
wget http://developer.download.nvidia.com/compute/cuda/11.0.1/local_installers/cuda_11.0.1_450.36.06_linux.run
sh cuda_11.0.1_450.36.06_linux.run --silent --toolkit
rm cuda_11.0.1_450.36.06_linux.runNote, that all the python scripts have more detailed options explanations when run with "--help"
The code for the Accel-Sim and AccelWattch frameworks are in this repo. Accel-Sim 1.0 uses the GPGPU-Sim 4.0 performance model, which was released as part of the original Accel-Sim paper. Building the trace-based Accel-Sim will pull the right version of GPGPU-Sim 4.0 and the AccelWattch power model to use in Accel-Sim. AccelWattch replaces the GPUWattch power model in GPGPU-Sim 4.0.
There is an additional repo where we have collected a set of common GPU applications and a common infrastructure for building them with different versions of CUDA. If you use/extend this app framework, it makes Accel-Sim easily usable with a few simple command lines. The instructions in this README will take you through how to use Accel-Sim with the apps in from this collection as well as just on your own, with your own apps.
AccelWattch microbenchmarks and AccelWattch validation set benchmarks are also included. For more information on these benchmarks, please look at our MICRO 2021 paper and AccelWattch MICRO'21 Artifact Manual.
-
Accel-Sim Tracer: An NVBit tool for generating SASS traces from CUDA applications. Code for the tool lives in ./util/tracer_nvbit/. To make the tool:
export CUDA_INSTALL_PATH=<your_cuda> export PATH=$CUDA_INSTALL_PATH/bin:$PATH ./util/tracer_nvbit/install_nvbit.sh make -C ./util/tracer_nvbit/
A simple example
The following example demonstrates how to trace the simple rodinia functional tests
that get run in our travis regressions:# Make sure CUDA_INSTALL_PATH is set, and PATH includes nvcc # Get the applications, their data files and build them: git clone https://github.com/accel-sim/gpu-app-collection source ./gpu-app-collection/src/setup_environment make -j -C ./gpu-app-collection/src rodinia_2.0-ft make -C ./gpu-app-collection/src data # Run the applications with the tracer (remember you need a real GPU for this): ./util/tracer_nvbit/run_hw_trace.py -B rodinia_2.0-ft -D <gpu-device-num-to-run-on>
That's it. The traces for the short-running rodinia tests will be generated in:
./hw_run/traces/
To extend the tracer, use other apps and understand what, exactly is going on, read this.
For convience, we have included a repository of pre-traced applications - to get all those traces, simply run:
./get-accel-sim-traces.py
and follow the instructions.
-
Accel-Sim SASS Frontend and Simulation Engine: A simulator frontend that consumes SASS traces and feeds them into a performance model. The intial release of Accel-Sim coincides with the release of GPGPU-Sim 4.0, which acts as the detailed performance model. To build the Accel-Sim simulator that uses the traces, do the following:
pip3 install -r requirements.txt source ./gpu-simulator/setup_environment.sh make -j -C ./gpu-simulator/This will produce an executable in:
./gpu-simulator/bin/release/accel-sim.out
Running the simple example from bullet 1
./util/job_launching/run_simulations.py -B rodinia_2.0-ft -C QV100-SASS -T ./hw_run/traces/device-<device-num>/<cuda-version>/ -N myTest
The above command will run the workloads in Accel-Sim's SASS traces-driven mode. You can also run the workloads in PTX mode using:
PTX mode usage: ./util/job_launching/run_simulations.py -B <benchmark> -C <gpu_config> -N <run_identifier> Optional: [-B benchmark] (From the gpu-app-collection compiled in Step 1) [-C gpu_config] (List of supported configs: accel-sim-framework/util/job_launching/configs/define-standard-cfgs.yml)
Eg:
./util/job_launching/run_simulations.py -B rodinia_2.0-ft -C QV100-PTX -N myTest-PTX
You can monitor the tests using:
./util/job_launching/monitor_func_test.py -v -N myTest
After the jobs finish - you can collect all the stats using:
./util/job_launching/get_stats.py -N myTest | tee stats.csvIf you want to run the accel-sim.out executable command itself for specific workload, you can use:
/gpu-simulator/bin/release/accel-sim.out -trace ./hw_run/rodinia_2.0-ft/9.1/backprop-rodinia-2.0-ft/4096___data_result_4096_txt/traces/kernelslist.g -config ./gpu-simulator/gpgpu-sim/configs/tested-cfgs/SM7_QV100/gpgpusim.config -config ./gpu-simulator/configs/tested-cfgs/SM7_QV100/trace.config
However, we encourage you to use our workload launch manager 'run_simulations' script as shown above, which will greatly simplify the simulation process and increase productivity.
To understand what is going on and how to just run the simulator in isolation without the framework, read this.
To better undersatnd the Accel-Sim front-end and the interface with GPGPU-Sim, read this.
-
Accel-Sim Correlator: A tool that matches, plots and correlates statistics from the performance model with real hardware statistics generated by profiling tools. To use the correlator, you must first generate hardware output and simulation statistics. To generate output from the GPU, use the scripts in ./util/hw_stats. For example, to generate the profiler numbers for the short-running apps in our running example, do the following: Note that this step assumes you have already built the apps using the instructions from (1).
./util/hw_stats/run_hw.py -B rodinia_2.0-ftNote: Different cards support different profilers. By default - this script will use nvprof. However, you can use nsight-cli instead using:
./util/hw_stats/run_hw.py -B rodinia_2.0-ft --nsight_profiler --disable_nvprofAll the stats will be output in:
./hw_run/...Note - that in order to correlate our running example with your local machine - you need to have a QV100 card. However - we also provide a comprehensive suite of hardware profiling results, which can be obtained by running:
./util/hw_stats/get_hw_data.shNow you can use the statistics from the simulation run you did in (2) to correlate with these results. To generate stats that can be correlated - do the following:
./util/job_launching/get_stats.py -R -k -K -B rodinia_2.0-ft -C QV100-SASS | tee per.kernel.stats.csvTo run the correlator - do the following:
./util/plotting/plot-correlation.py -c per.kernel.stats.csv -H ./hw_run/QUADRO-V100/device-0/9.1/
The script may take a few minutes to run (primarily because it is parsing a large amount of hardware data for >150 apps). Stdout will print the summary of counters error, correlation, etc. and a set of correlation plots will be generated in:
./util/plotting/correl-html/
Here you will find interactive HTML plots, csvs and textual summaries of how well the simulator correlated against hardware on both a per-kernel and per-app basis. Note that the simple tests we ran in this tutorial are short running and not generally representative of scaled GPU apps and are just meant to quickly validate you can get Accel-Sim working. For a true validation, you should attempt correlating the fully-scaled set of apps used in the paper. These will take hours to run (even on a cluster), and some consume significant memory, but can be run using:
./util/job_launching/run_simulations.py -B rodinia-3.1,GPU_Microbenchmark,sdk-4.2-scaled,parboil,polybench,cutlass_5_trace,Deepbench_nvidia -C QV100-SASS -T ~/../common/accel-sim/traces/tesla-v100/latest/ -N all-apps -M 70G
# Once complete, collect the stats and plot
./util/job_launching/get_stats.py -k -K -R -N all-apps | tee all-apps.csv
./util/plotting/plot-correlation.py -c all-apps.csv -H ./hw_run/QUADRO-V100/device-0/9.1/- Accel-Sim Tuner: An automated tuner that automates configuration file generation from a detailed microbenchmark suite. You need to provide a C header file
hw_defthat contains minimal information about the hardware model. This file is used to configure and tune the microbenchmarks for the unduerline hardware. See an example of Ampere RTX 3060 card here. Then, compile and run the microbenchmarks and the tuner:
# Make sure PATH includes nvcc
# If your hardware has new compute capability, ensure to add it in the /GPU_Microbenchmark/common/common.mk
# Compile microbenchmarks
make -C ./util/tuner/GPU_Microbenchmark/
# Set the device id that you want to tune to
# If you do not know the device id, run ./tuner/GPU_Microbenchmark/bin/list_devices
export CUDA_VISIBLE_DEVICES=0
# Run the ubench and save output in stats.txt
./util/tuner/GPU_Microbenchmark/run_all.sh | tee stats.txt
# Run the tuner with the stats.txt from the previous step
./util/tuner/tuner.py -s stats.txtThe tuner.py script will parse the microbenchmarks output and generate a folder with the same device name (e.g. "RTX_3060"). The folder will contain the config files for GPGPU-Sim performance model and Accel-Sim trace-driven front-end that matche and model the underline hardware as much as possible. For more detilas about the Accel-Sim tuner and the microbemcakring suite, read this.
Install docker, then simply run:
docker run --env CUDA_INSTALL_PATH=/usr/local/cuda-11.0 -v `pwd`:/accel-sim:rw accelsim/ubuntu-18.04_cuda-11:latest /bin/bash travis.sh
If something is dying and you want to debug it - you can always run it in interactive mode:
docker run -it --env CUDA_INSTALL_PATH=/usr/local/cuda-11.0 -v `pwd`:/accel-sim:rw accelsim/ubuntu-18.04_cuda-11:latest /bin/bash
Then from within the docker run:
./travis.sh
You can also play around and do stuff inside the image (even debug the simulator) - if you want to do this, installing gdb will help:
apt-get install gdb
Don't want to install docker? Just use a linux ditro with the packages detailed in dependencies, set CUDA_INSTALL_PATH, the run ./travis.sh.
- Running AccelWattch SASS SIM: To run the simple example from bullet 1 with AccelWattch power estimations enabled using the AccelWattch SASS SIM model,
./util/job_launching/run_simulations.py -B rodinia_2.0-ft -C QV100-Accelwattch_SASS_SIM -T ./hw_run/traces/device-<device-num>/<cuda-version>/ -N myTestThis will use the AccelWattch SASS SIM xml configuration file for the power model. The configuration files for the AccelWattch power model presented in our MICRO 2021 paper can be found here. Please look at ./util/job_launching/configs/define-standard-cfgs.yml for a list of provided AccelWattch configurations. The AccelWattch HYBRID configuration provided there uses activity factors for L2 and NOC from Accel-Sim and the rest from hardware performance counters. You can create your own AccelWattch HYBRID configuration in this file with a different mix of AccelWattch activity factors from Accel-Sim and hardware execution.
Upon completion of simulations, AccelWattch power estimations are stored in a accelwattch_power_report.log in a per-kernel format in the run directory.
- Running AccelWattch HW or AccelWattch HYBRID: To run the simple example from bullet 1 with AccelWattch HW or AccelWattch HYBRID configurations,
./util/job_launching/run_simulations.py -B rodinia_2.0-ft -a -C <QV100-Accelwattch_SASS_HW or QV100-Accelwattch_SASS_HYBRID> -T ./hw_run/traces/device-<device-num>/<cuda-version>/ -N myTestNote that AccelWattch HW and AccelWattch HYBRID configurations require hardware performance counter information for the target application stored in a hw_perf.csv file in the run directory. A sample hw_perf.csv file with performance counter information collected from a QV100 card for validation suite benchmarks used in our MICRO 2021 paper is copied over to the run directory by default with the above run_simulations.py command. The -a argument for run_simulations.py is used to feed the application name to AccelWattch. Please make sure that there is a hardware performance counter information entry with the same application name in hw_perf.csv for AccelWattch to obtain activity factors from. Please look at example entries in the provided ./util/accelwattch/accelwattch_hw_profiler/hw_perf.csv.
- Running AccelWattch PTX SIM: To run the simple example from bullet 1 with AccelWattch power estimations enabled using the AccelWattch PTX SIM model,
./util/job_launching/run_simulations.py -B rodinia_2.0-ft -C QV100-Accelwattch_PTX_SIM -N myTest-
Hardware Power and Performance Profiler: The AccelWattch hardware profiler scripts are located at
./util/accelwattch/accelwattch_hw_profiler/in this repository. For more information on how to use them, please look at this section in our MICRO'21 Artifact Manual. -
Microbenchmarks and Quadratic Optimization Solver: The source code for the microbenchmarks used for AccelWattch dynamic power modeling are located here and can be compiled by following the README here. The Quadratic Optimization Solver MATLAB script is located at
./util/accelwattch/quadprog_solver.m. -
SASS to Power Component Mapping: The header file
gpu-simulator/ISA_Def/accelwattch_component_mapping.hcontains the Accel-Sim instruction opcode to AccelWattch power component mapping and can be extended to support new SASS instructions for future architectures. Please look at the opcode.h files for respective GPU Architectures in the same directorygpu-simulator/ISA_Def/for SASS instruction to Accel-Sim opcode mapping.