jaysoffian/eap_proxy

Issues

• Native IPv6 with DHCPv6-PD

  #3 opened 7 years ago by cpugeniusmv
  54

• au Hikarie fiber 10G with Edgerouter Infinity

  #38 opened 4 years ago by lundman
  5

• Update prevents VLAN0?

  #52 opened 2 years ago by cinderblock
  3

• Firewalla support?

  #49 opened 2 years ago by iogitio
  1

• eth2 dropping every day around same time

  #47 opened 3 years ago by FurmanSK
  8

• Does this work with static blocks?

  #18 opened 5 years ago by bhechinger
  16

• USG reboot not triggering reauthentication

  #45 opened 3 years ago by radicand
  3

• EdgeRouter 4 w/ bypass + Static IP Block

  #43 opened 3 years ago by blumberg-git
  0

• ER-4 running Eap_Proxy in front of UDM Pro

  #41 opened 3 years ago by MatthewGCampbell
  0

• 2021 - ATT Fiber - How to configure IPv6

  #44 opened 4 years ago by blumberg-git
  1

• Getting IPv6 working with NetworkManager

  #40 opened 4 years ago by survient
  1

• does this work with static ips from att?

  #39 opened 4 years ago by nikolaishields
  3

• Dream Machine Pro compatibility

  #37 opened 4 years ago by RichBrew
  3

• Incompatible with EdgeOS 2.0.8 on ERX

  #33 opened 4 years ago by cyberkitsune
  8

• Not getting a DHCP response from AT&T

  #27 opened 4 years ago by bhechinger
  16

• Unifi 5.12.22 WAN VLAN >= 2

  #29 opened 4 years ago by AustinSaintAubin
  1

• Strange issue with installation of eap_proxy for USG

  #34 opened 4 years ago by osagher
  2

• Configuring Remaining Interfaces as Switch (ER-X)

  #35 opened 4 years ago by NativeScriptNewb
  1

• Can eap_proxy work with a switch between the ONT and the router?

  #32 opened 4 years ago by abulgatz
  4

• Re-authenticating every 20-180 seconds?

  #30 opened 4 years ago by tobiasmcnulty
  17

• eth0.0 problem

  #16 opened 6 years ago by os6
  3

• ERPoE-5 switched ports (eth2-eth4) do not forward unicast EAP packets from router

  #13 opened 6 years ago by globalreset
  2

• Doesn't work properly under EdgeOS v2.0.6

  #24 opened 5 years ago by caffeineflo
  9

• script doesn't use interface vlan for looking up gateway to ping

  #26 opened 5 years ago by radicand
  7

• Installation and setup instructions for non-EdgeOS (generic Linux) devices

  #21 opened 5 years ago by tobiasmcnulty
  13

• eap_proxy start error: unexpected poll event

  #28 opened 5 years ago by drewmullen
  5

• Losing WAN on USG reboot, requires RG reconnect

  #20 opened 5 years ago by missedtheapex
  1

• New AT&T EAP Failures

  #19 opened 5 years ago by abock
  2

• Clarifications on EdgeRouter setup

  #11 opened 6 years ago by claym
  1

• Clarification Needed

  #17 opened 5 years ago by ktreese
  1

• No external IP address

  #15 opened 6 years ago by rchaud
  3

• Failover Delay

  #12 opened 6 years ago by K-MTG
  5

• License?

  #14 opened 6 years ago by cerealcable
  0

• Regex for default gateway can fail with complex route tables

  #10 opened 6 years ago by keatontaylor
  0

• Byte encoding of default gateway IP not correct.

  #8 opened 6 years ago by keatontaylor
  2

• Using with Business Fiber - VLAN2?

  #7 opened 6 years ago by aggietallboy
  6

• Attaching QOS to eth0.0 breaks the proxy

  #6 opened 6 years ago by terhorst
  0

• Usability as a layer-2 bridge?

  #2 opened 7 years ago by chrissnell
  3

• ipv6 problem?

  #1 opened 7 years ago by EricDkk
  26

• ping gateway periodically

  #4 opened 7 years ago by shaddow825
  6