Issues
- 5
CM4 SYNC_OUT does not have any signal output
#36 opened by qqzg - 0
- 4
CM4 P2P timestamping
#34 opened by gspreeth - 2
Support for linuxptp v4?
#33 opened by yxie20 - 4
- 6
- 3
Document need to use dhcpcd on bookworm.
#31 opened by JN19aban - 4
Kernel RT or LL question.
#28 opened by JN19aban - 11
LEA-M8F U-Center Timepulse issue
#25 opened by JN19aban - 0
- 10
- 2
Alternatives to CM4 ?
#26 opened by mcamurri - 3
Add info about Mikrotik switches
#22 opened by jclark - 1
- 7
- 1
Cm4 PWM Fan issue
#19 opened by JN19aban - 3
PTP enabled switch as a Slave
#18 opened by kondou - 12
Serial port
#14 opened by JN19aban - 5
When reboot the CM4 sometime halts
#16 opened by JN19aban - 7
configuring IES3110-8TF-R as TC
#17 opened by kondou - 9
MOTU AVB switch as TC
#15 opened by kondou - 7
GPS strange behavior
#12 opened by JN19aban - 2
parameter setting for grandmaster
#13 opened by kondou - 2
- 8
PTP client behavior
#10 opened by kondou - 17
- 0
PHC clock locked/unlocked?
#8 opened by kondou - 18
Not working with TimeBeat M8F
#6 opened by kondou - 1
Driving GPIO when PTP frame is received.
#7 opened by maku0 - 3
- 4
- 3
Occasional bad, extra PPS pulses
#5 opened by jclark - 2
Wrong time after cable unplugged
#3 opened by jclark - 1
ts2phc "poll returns zero, no events" error
#2 opened by jclark