Pinned Repositories
DXF-library
DXF library of various parts. Raspberry Pi and Arduino are included
dynamixel-controller
A general purpose controller based on an Atmega controller for controlling AX-12 servos as well as I2C servos.
Eagle-Library
My custom Eagle library.
Grbl-Jogger
This is a simple wxPython control for jogging a GRBL based CNC machine.
iMX_robot
scripts and code for iMX53 based robot
Mech-Control
Software used to pilot a Mech for Mech Warfare. Based on pyGame.
mr_whizzer
Beetle weight robot for combat
python_dynamixels
A simple module for communicating with Dynamixel AX12 servos from Python.
raspberry-gpio-email
Raspberry pi GPIO via email
servospindle
Converts a manual router speed controller to CNC control by connecting the potentiometer of the controller to a servo. The servo is controlled by an Arduino board connected to the parallel port. The Arduino decodes the PWM from the computer into a servo position.
jes1510's Repositories
jes1510/servospindle
Converts a manual router speed controller to CNC control by connecting the potentiometer of the controller to a servo. The servo is controlled by an Arduino board connected to the parallel port. The Arduino decodes the PWM from the computer into a servo position.
jes1510/DXF-library
DXF library of various parts. Raspberry Pi and Arduino are included
jes1510/dynamixel-controller
A general purpose controller based on an Atmega controller for controlling AX-12 servos as well as I2C servos.
jes1510/Grbl-Jogger
This is a simple wxPython control for jogging a GRBL based CNC machine.
jes1510/iMX_robot
scripts and code for iMX53 based robot
jes1510/Mech-Control
Software used to pilot a Mech for Mech Warfare. Based on pyGame.
jes1510/MSP430-controlled-mobile
jes1510/clone-sd