jgyates/genmon

Issues

• Power Output not displaying correctly during a Power Outage on Genmon

  #1227 opened 3 days ago by bbenton1341
  6

• Add charger meter to show mv charger is pulling

  #1219 opened 8 days ago by grsthegreat
  28

• External Tank Gauge shows zero

  #1218 opened 17 days ago by lampe208
  6

• can you add support for mebay generator controller

  #1216 opened 24 days ago by maindrive
  5

• CallMeBot Issue after switching to PiZero2W

  #1212 opened 24 days ago by Ic3Nine
  11

• Unable to set mopeka sensor conf file to debug mode.

  #1206 opened 2 months ago by notms
  10

• Error in MopekaBT:Start: [Errno 22] Invalid argument : mymopeka.py:402

  #1203 opened 2 months ago by msteil4vse
  27

• External Temperature Sensor

  #1204 opened 2 months ago by philruel
  11

• Losing run hours and power_log_json on reboot

  #1197 opened 3 months ago by skipfire
  5

• Setup fails if Python isn't installed first

  #1195 opened 3 months ago by skipfire
  3

• Pre-Nexus controller keeps saying inspect spark plug and inspect air filter with genmon plugged in

  #1191 opened 3 months ago by TheawesomeMCB
  36

• Parity Error

  #1192 opened 3 months ago by F4iguy69
  2

• Pre-Nexus Controller. Genmon won't report RPM or frequency to webui it's just stuck at 0 rpm and 0 Hz but everything else works and monitors fine

  #1188 opened 3 months ago by TheawesomeMCB
  5

• New Error "Under Voltage : Alarm Code: 0000"

  #1186 opened 3 months ago by eBoon123
  6

• power output

  #1187 opened 3 months ago by danielsnapon
  6

• Preparing metadata fails

  #1184 opened 3 months ago by chriskinal
  3

• Generator L1/L2 Amps displaying wrong

  #1181 opened 3 months ago by F4iguy69
  3

• Estimated Fuel Guage Increasing Instead of Decreasing.

  #1180 opened 4 months ago by bbenton1341
  5

• MQTT Briggs & Stratton Missing Messages

  #1175 opened 4 months ago by Mundane0
  4

• Reporting Air Cooled But Liquid Cooled

  #1171 opened 4 months ago by heffneil
  15

• exercise time issue

  #1169 opened 4 months ago by wrvolz
  10

• Powerlog isn't showing power consumed details from 3 weeks ago

  #1168 opened 4 months ago by skipfire
  3

• can not connect to web interface

  #1162 opened 5 months ago by mullinp
  10

• Did upgrade and now I just get “loading generator monitor”

  #1163 opened 5 months ago by rhombixt
  40

• Gauges do not appear

  #1155 opened 5 months ago by gerolymatos
  40

• MQTT "Numeric Topics" option not applied to Hz (Calculated), which gets published with numeric + "Hz"

  #1158 opened 5 months ago by billpribyl
  2

• Status color key

  #1151 opened 5 months ago by griffths
  1

• MQTT: System in Alarm not clearing when no alarm present

  #1140 opened 6 months ago by chrkov
  6

• Output Voltage graph nominal value not matching

  #1139 opened 6 months ago by rsockanc
  3

• Enhanced Exercise w/v1.19.03

  #1106 opened 8 months ago by gm58
  29

• Can you support some sort of auth token or basic authentication for API calls

  #1123 opened 7 months ago by ericsmith66
  5

• GenMon website not responding after update

  #1113 opened 8 months ago by jjmacneil
  3

• Enhanced Exercise, fails to exicute after upgrade to V1.19.02

  #1110 opened 8 months ago by msteil4vse
  9

• Backup/Restore

  #1109 opened 8 months ago by jcleek
  1

• After every update generator settings and mqtt settings are wiped

  #1099 opened 9 months ago by Daniel-dev22
  6

• Stale link in Wiki for current measurement option--no hardware available?

  #1096 opened 9 months ago by w-u-2-o
  3

• Login page does not find jquery

  #1095 opened 9 months ago by skipfire
  2

• Mopeka 3 tank config, 3rd tank not working after upgrade

  #1088 opened 10 months ago by msteil4vse
  1

• Cannot restore backup

  #1086 opened 10 months ago by Ariveraq
  1

• just a question about fuel gauge

  #1079 opened 10 months ago by grsthegreat
  0

• Multiple Notifications Per Email Address

  #1071 opened 10 months ago by knemo20000
  6

• Firmware 1.18 ?

  #1072 opened 10 months ago by farberm
  2

• Web update was not successful

  #1070 opened 10 months ago by hokie21
  6

• Feature Request data to csv

  #1067 opened 10 months ago by diverbill
  1

• Genmon exercise runs weekly even when I have it set for bi-weekly.

  #1066 opened 10 months ago by sfaught22
  10

• Get either an email or a pushover alert if Genpi unit goes offline

  #1065 opened 10 months ago by grsthegreat
  3

• Export per-leg current readings via MQTT

  #1062 opened 10 months ago by gmn42
  1

• L1/L2 Current graphs scaled too low (22KW Evo Air-cooled)

  #1061 opened 10 months ago by gmn42
  1

• Genmqtt fails to start; missing "callback_api_version"

  #1058 opened a year ago by jwelter1971
  10

• paho-mqtt 2.0 compatibility

  #1054 opened a year ago by sahlawat
  1