joric/nrfmicro

Issues

• [Question] Pro Micro NRF52840 LED charging behaviour.

  #75 opened 7 months ago by Finnitio
  1

• Compatibility with IBM model M

  #74 opened 10 months ago by IronLover64
  3

• Really low battery life

  #73 opened a year ago by madushan1000
  4

• jlc and pcba

  #72 opened a year ago by Franck78
  0

• SK6812 LEDs power over USB and charging

  #71 opened a year ago by NickHu
  2

• SuperMini NRF52840 AIN2 Battery

  #70 opened a year ago by petanque
  1

• SuperMini NRF52840 and 52840nano

  #69 opened a year ago by dudicoco
  2

• Some tips (soldering, rapberrypi pico with picoprobe software)

  #67 opened a year ago by madushan1000
  0

• How to check soldering for older versions?

  #68 opened a year ago by ntrp
  2

• I'm beaten after frying 3 boards

  #66 opened a year ago by klesh
  2

• Need guidance for JLC assembly: missing BOM & CPL files

  #65 opened 2 years ago by buitrung
  1

• Black magic probe does not show up in COM ports

  #59 opened 3 years ago by JiaGengChang
  4

• Missing capacitors on voltage regulator?

  #64 opened 2 years ago by levpopov
  2

• Question: nRFMicro 1.1 LEDs D2/D3 orientation

  #39 opened 4 years ago by Raskilas
  4

• Battery drops too fast

  #63 opened 2 years ago by shaohao
  1

• Why not use the chip internal DCDC regulator?

  #62 opened 2 years ago by cirias
  1

• Unrecognized Device Blue Pill to Blackmagic

  #61 opened 2 years ago by drakumus
  5

• Need help!: problem flashing the bootloader

  #60 opened 2 years ago by lebatbao
  1

• Any plan on embedding the nrf52840 directly on the board?

  #58 opened 3 years ago by Miigon
  1

• Firmware starts only after openocd init. How to factory reset nrf52840?

  #57 opened 3 years ago by yejianfengblue
  2

• zephyr support

  #56 opened 3 years ago by ntn888
  2

• single step debugging

  #55 opened 3 years ago by billionfish
  2

• zephyr port?

  #54 opened 3 years ago by ntn888
  2

• Can ST-LINK/V2 be replaced by CMSIS-DAP?

  #52 opened 3 years ago by yejianfengblue
  1

• 1.8v in high voltage mode

  #51 opened 3 years ago by ImMrMa
  7

• Lost wallet

  #48 opened 3 years ago by timothyfleming1979
  0

• Small wiki fix

  #50 opened 3 years ago by torshin
  0

• Typo in wiki

  #49 opened 3 years ago by auipga
  0

• BOM for v1.4?

  #36 opened 4 years ago by pluskid
  6

• CircuitPython Support for 2G4M08S1E - nRF52833-based?

  #46 opened 3 years ago by ChangcongWang
  1

• nrfMicro1.4 crystal not need capacitors ?

  #45 opened 3 years ago by Czzr
  1

• Support for 2G4M08S1E - nRF52833-based?

  #44 opened 3 years ago by mrninhvn
  1

• Poor connection between halves

  #43 opened 3 years ago by wizar
  1

• Computer not detecting nrfMicro 1.1 over USB, after I was able to flash bootloader using blackmagic and bluepill

  #37 opened 4 years ago by harshitgoel96
  4

• QMK Firmware creation with MSYS Error

  #42 opened 4 years ago by Tobiassss
  1

• nrfMicro 1.1 doesn't detects via USB, possible duplication of #37

  #41 opened 4 years ago by Raskilas
  1

• [QA] Can I modify the width to 20mm for JLCPCB SMT assembly?

  #40 opened 4 years ago by donus3
  2

• Heating of nrfmicro

  #38 opened 4 years ago by jrhrsmit
  2

• U2 capacitor to ground

  #35 opened 4 years ago by pseudobacon
  1

• About 0.12 pin bootloader

  #34 opened 4 years ago by a826889260
  1

• E73 on the other side on rev1.3

  #31 opened 4 years ago by enikesha
  1

• I used the ZMK firmware ext_ VCC does not have the correct output

  #27 opened 4 years ago by a826889260
  7

• Woul be cool to have a .svg file to download the stencil.

  #26 opened 4 years ago by Zeioth
  2

• Help with debuging.

  #25 opened 5 years ago by ilukinov
  1

• Parts list for v1.2

  #24 opened 5 years ago by tlrogers-lap
  4

• Issue: Flashing Bootloader for Holyiot nrf52840

  #23 opened 5 years ago by marhalloweenvt
  1

• I modified blink.c to test more pins, having problem to recompile it.

  #22 opened 5 years ago by luantty2
  1

• Lipo battery not charging

  #21 opened 5 years ago by luantty2
  2

• Group Buy Plans

  #20 opened 5 years ago by NellyWhads
  1

• New image URL for USB-C midmount on Status wiki page

  #19 opened 5 years ago by sowbug
  1