jparklab/synology-csi

Issues

• Failed to run ISCSI login: exit status 19

  #37 opened 4 years ago by benwbooth
  19

• After upgrade to k8s 1.24 - Could not log into all portals

  #52 opened 2 years ago by jhueppauff
  1

• Create Volume Parameters

  #50 opened 3 years ago by reski-rukmantiyo
  0

• Pod fails with error 19

  #48 opened 4 years ago by kbreit
  1

• Dockerhub image needs to be updated

  #47 opened 4 years ago by rtrox
  0

• Support expanding volumes

  #40 opened 4 years ago by jparklab
  2

• Failed to mount existing volumes

  #35 opened 4 years ago by jparklab
  5

• PVs don't reattach after power outage

  #45 opened 4 years ago by ahuffman
  2

• syno-config.yml Link to the differing API version parameter documentation

  #34 opened 5 years ago by ahuffman
  2

• Issues Creating more than 1 lun and target

  #43 opened 4 years ago by reski-rukmantiyo
  1

• PV and PVC Examples

  #44 opened 4 years ago by reski-rukmantiyo
  1

• Reference Issue

  #42 opened 4 years ago by reski-rukmantiyo
  1

• Support creating snapshots

  #41 opened 4 years ago by jparklab
  0

• Failed to find device

  #39 opened 4 years ago by Earthson
  1

• Installation as Helm chart

  #38 opened 4 years ago by tardich
  1

• Multiarch not working on arm64

  #30 opened 5 years ago by ahuffman
  1

• README update - Specify namespace

  #20 opened 5 years ago by brianbuquoi
  0

• Occasional volume attach failure

  #25 opened 5 years ago by brianbuquoi
  1

• Unable to mount volume on k8s 1.17

  #18 opened 5 years ago by kidhasmoxy
  18

• Self-signed certificate for Synology DSM

  #13 opened 5 years ago by dannyyy
  1

• Authentication (2FA and administrator group)

  #14 opened 5 years ago by dannyyy
  1

• CreateVolume times out and controller gets stuck in already exists loop

  #12 opened 5 years ago by damomurf
  3

• CSI Node fails to log into a ISCSI target

  #6 opened 5 years ago by jparklab
  2

• Support ext4 Synology volumes

  #2 opened 5 years ago by brianbuquoi
  0

• Update README on how to use different volume location or type then the default values.

  #3 opened 5 years ago by jparklab
  0

• Minikube compatibility

  #1 opened 5 years ago by NMichas
  4