Botvac Tools
Repo to hold scripts and instructions for testing the Neato Robotics Botvac.
Getting Started
Drivers
To connect to the robot via the USB port, you may need to install a device driver.
Linux
Ubuntu 14.04 and 16.04 do not need special drivers to communicate with the
robot. It will appear as a serial port, such as /dev/ttyACM0
Windows
Windows 7 and 10 require driver installation to communicate with the robot.
- 32-bit:
- NeatoUpdaterToolInstaller_x86
- 64-bit:
- NeatoUpdaterToolInstaller_x64
The robot will then show up as a COM port, which you can connect to using a program such as TeraTerm or Putty.