Issues
- 1
Documentation states OpenGL 1.50 but Probe Basic actually requires OpenGL 3.2 and GLSL 1.50
#113 opened by Unl0gic - 2
Menu option to override limits is not working
#118 opened by Unl0gic - 1
- 0
keyboard bindings
#116 opened by Bentowle - 3
- 1
Missing Lathe subroutine
#114 opened by DerHobbyist - 1
go_to_zero.ngc; missing G90?
#91 opened by dpslwk - 1
M73 in subroutines
#92 opened by dpslwk - 1
This is a test of the chat broadcast messages
#89 opened by TurBoss - 0
- 0
- 1
- 0
qtpyvcp joint.in.error current
#81 opened by junke365 - 2
Expand wheel widget to 24 or 36 tools
#77 opened by Stephanisk - 1
confusing information on compatibility
#75 opened by tcurdt - 2
Rack Tool Change UI
#59 opened by flowers84 - 10
Update not possible
#70 opened by hasechris - 0
- 0
Add a PB linuxcnc config wizard
#73 opened by joco-nz - 0
Tool setter
#72 opened by alexphredorg - 0
- 3
- 2
Installer Error
#62 opened by akritiadmin - 1
Calling Probe Routines from physical Switch
#68 opened by Alexfehr1987 - 1
Probe_basic will not load
#61 opened by T-Workshop - 1
- 1
Rotary axis jog speed
#53 opened by RV8ER - 4
Spindle inhibit while probing
#49 opened by pommen - 1
Edge Angle offsets
#47 opened by Moshkopp - 3
- 3
intall issues
#65 opened by chienMouille - 2
Manual tool change with touch of routine
#64 opened by EragonPower - 3
LinuxCNC -> grblHAL
#63 opened by eecue - 1
Resolution issue with Python3 branch
#60 opened by nickstewartroc - 3
Spindle load indicator text "{P}%"
#57 opened by flounderscore - 6
ATC screen blank
#48 opened by aaroncnc - 1
test issue
#55 opened by TurBoss - 1
Install problems
#52 opened by dlhenke - 4
Probe Basic Lathe: orientation of tool path
#36 opened by Gnevko - 2
Allow custom distance for angle probing
#45 opened by sttts - 1
Probe Basic Vertical
#50 opened by OpenSourceDevelop - 1
Crash when halui.machine.off high at startup
#46 opened by risfutile - 0
How to install on Pi4
#44 opened by dlhenke - 6
ToolTable gets Blank on Chars like Ä Ü Ö
#43 opened by Moshkopp - 6
Critical Error: Tool N can't be found
#37 opened by Gnevko - 3
- 1
Probe Basic Lathe: Touch Off Routine for X Axis
#39 opened by Gnevko - 2
Probe Basic Lathe: Display of real Spindle Speed
#35 opened by Gnevko - 1
Probe Basic Lathe: number format
#38 opened by Gnevko - 1
Configuring tool touch off
#41 opened by cerdo1